Edge Comp for Dodge Cummins 5.9L, 24V

See what our Experts say about this Edge Performance Chip

• Does Edge Comp EP30301 for 2001 Dodge 2500 Work With Cummins Diesel Engine
  I checked with Edge for you, and so long as your 2001 Ram 2500 has the 5.9L 24-valve Cummins engine you can use the Edge Comp Tuner for Dodge # EP30301. It will only work with the 24-valve though according to Edge, and will not work with the 12-valve.
  view full answer...
• Edge Evolution Power Level Timing Information For A 2006 Dodge Ram 5.9L Cummins Diesel
  I did contact Edge on your behalf and they are not able to release that information. For a correct fit, you would want part # EP36YR (or # EP46YR if you live in California) for your 2006 Dodge Ram Pickup with 5.9 Cummins diesel rather than # EP30301. Included are video resources for more information regarding this part.
  view full answer...
• Roof Rack Recommendation for a 2016 Buick LaCrosse
  For your 2016 Buick Lacrosse you would want the Rhino Rack that consists of part number # RRVA126B-2, # RRRLKVA and # DK225.
  view full answer...
• Power Per Tune Level of the Edge Comp for Dodge Cummins 5.9L # EP30301
  I can give you the horsepower and torque figures for each of the level settings of the Edge Comp for Dodge Cummins 5.9L # EP30301 but they do not give us the timing, boost psi, and torque management figures for each level. Stock: 0 Horsepower - 0 Foot Pounds of Torque Level 1: 40 Horsepower - 150 Foot Pounds of Torque Level 2: 60 Horsepower - 200 Foot Pounds of Torque Level 3: 80 Horsepower - 250 Foot Pounds of Torque Level 4: 100 Horsepower - 300 Foot Pounds of Torque Level 5: 120 Horsepower...
  view full answer...
• Will The Edge Jammer Cold Air Intake Work With An Exhaust Brake On A Dodge 5.9L Cummins Engine
  The Edge Jammer Cold Air Intake with Pre-Oiled Air Filter part # EP38225 is designed to fit a 1994-2002 Dodge Ram with the 5.9l turbocharged diesel engine. As the Banks exhaust brake works to compress the exhaust gasses (hot side) not the intake flow (cold side), it should have no compatibility issues with the Edge cold air intake as long as your turbocharger remains in the factory location. Therefore, yes, the Edge cold air intake will work with the Banks exhaust brake. This is a great...
  view full answer...
• Restoring Factory Tune in 2001 Dodge Ram 3500 with Cummins 5.9L
  Performance tuners like Edge's products store a vehicle's original factory tune inside their internal memory. This storage feature allows you to restore the factory tune by reinstalling that original file. The tuners that fit your 2001 Dodge Ram 3500 with 5.9L Cummins, like the Edge Juice with Attitude # EP31501 and the others on the linked page, will hold your factory tune until you re-install it. The tuner can be disconnected after the alternate tune has been installed until such time...
  view full answer...
• Do I Also Need EGT Gauge When Using Edge Comp Chip on 1999 Dodge Ram 3500 Cummins Diesel
  I contacted our representative at Edge and he informed me that it would be a good idea to have an EGT Gauge installed when using higher settings on the Edge Comp. He also recommended installing a fuel pressure gauge and lifter or aftermarket fuel pump. You will want to make sure the motor is getting enough fuel when using the higher setting. The item you referenced, Edge Comp, part # EP30301 is for the 2001-2002 Dodge Ram 5.9L Cummins. For your 1999 Dodge Ram 5.9L Cummins, you should...
  view full answer...
• 1998 5.9 Freightliner Motorhome Troubleshooting Power Loss
  I wish we carried a programmer that would fit the Cummins engine you have in your motorhome but we don't since the wiring harnesses are different from the Dodge trucks. I do have some tips that may help your motorhome perform at it's peak though. Make sure both fuel filters are clean. There should be one on the frame and one on the engine. Make sure the lift pump is in good working order, when they go out they tend to cause power loss. Your crankshaft sensor could also need to be replaced.
  view full answer...
• On The Edge Comp, # EP30301, Stages 2-5 Stopped Adjusting On A 2001 Dodge Ram 2500
  On the Edge Comp for Dodge Cummins 5.9L, 24V, # EP30301, the Power Levels 2-5 additional power is added via the wire tap onto the injection pump. If the pump wire is not attached on the Edge Comp, Levels 2-5 are still operational, but the power gain is not any higher than Level 1. Under this scenario, however, power will come on much earlier in the throttle. You need to check the pump wire connection to make sure it is attached. I am sending a link to the instructions for the Edge Comp,...
  view full answer...
• How Much Fuel Economy Increase Should I Expect With Edge Programmer
  There is not a specific amount of fuel economy increase but programmers like the Edge Comp for Dodge Cummins 5.9L, 24V part # EP30301 typically gains a vehicle 1-2 miles per gallon because they help to improve the efficiency of the engine. As a result the vehicle gains better fuel economy. However, driving habits may decrease fuel economy especially at higher speeds.
  view full answer...
• Edge Comp Programmer Recommendation for a 2000 Dodge Ram with Cummins
  The Edge Comp part # EP30301 that you referenced has only been confirmed as a fit for the 2002 and 2002 Dodge Rams with the 5.9 Cummins engine. Since you have a 2000 I can't recommend a way for you to install it on your truck. Instead you would want the Comp part # EP30300 that has been confirmed as a fit for the 2000 Cummins Dodge Rams.
  view full answer...
• Do Programmers Hurt the Transmissions of Diesel Trucks
  Any time you greatly increase the horsepower/torque of a vehicle you run the risk of finding out where the weak points are on the vehicle. The transmission happens to be one of the most common places that added horsepower creates a problem. If you run the # EP30301 on the highest power level while towing a trailer that weighs more than the capacities of the vehicle you will most likely hurt something. But if you aren't abusing the truck you SHOULDN'T have a problem. A lot of it comes down...
  view full answer...
• How to Add a Tuner Power Switch to a 2001 Dodge Ram with 24V Cummins Engine
  I spoke with my contact at Edge and they informed me that the unit you have now (if purchased in 2007) is too old in order for a power level switch to be added. Therefore, you would need to upgrade your device if you wish to add a power level switch. For this, I recommend the Edge Comp for Dodge Cummins part # EP30301 which has the power level adjustments built into the side of the module.
  view full answer...
• Troubleshooting Edge Comp Performance Chip LED Lights Constantly Blinking On 1999 Dodge 2500
  I spoke with my contact at Edge about the Comp # EP30301 you said is installed on your Dodge 2500. They told me that when pushing the button on the unit to power it up, if it is pressed too long it will put the unit in a sub-level for setup and all 5 lights will blink as you said is happening.
  view full answer...
• Problem Re-Setting Edge Products Performance Tuner # EP30301
  A performance tuner like the Edge # EP30301 that fits your 2002 Ram with Cummins diesel will store your stock engine tune in its internal memory while the alternate tune is installed in your truck's computer. It is possible to remove the tuner from the vehicle while the alternate tune is in place but it must be re-installed to allow you to make any changes and to restore the stock settings. I reviewed your problem with my technical contact at Edge Products. He advised that in cases like...
  view full answer...
• How To Cycle Through The Setting On A Edge Comp Tuner For A Dodge 2500 5.9L 24V
  I am assuming your are referring to the Edge Comp for Dodge Cummins 5.9L, 24V part # EP30301. If this is the case, the programmer has 5 built in settings, each of which has their own functions from Level 1 to Level 5. The programs can be selected or changed on the physical box itself via an adjustment dial on the side of the device. The arrows will allow you to scroll up and down from Level 1 to Level 5 depending on your preferences. In order to restore the setting back to factory, you...
  view full answer...
• Troubleshooting Edge Comp Flashing During Acceleration on 2001 Ram Truck
  I spoke with my contact at Edge regarding the issue you are having with the Comp Box # EP30301 on your 2001 Ram truck. He stated that the flashing your experiencing is likely the result of either a bad ground wire connection or power wire connection. Make sure the red wire to the fuse box connection is securely attached to a good 12V circuit (Edge recommends the number 17 fuse inside the fuse panel on the left side of the instrument panel). Then make sure that the ground wire with the ring...
  view full answer...
• EGT Range and Boost Levels on a Cummins When Using the Edge Comp Module part # EP30301
  The EGT will vary quite a bit based on driving conditions. If you are just cruising down the highway maintaining a normal speed the EGT will be basically what the stock levels are. If you are in a truck pull and you have the truck at full throttle with a large load on the truck the EGT's will skyrocket. At the most you will see about 1,350 EGT on the highest power level under a heavy load. For typical daily driving you will see about 800-900. If the truck is totally stock you will see...
  view full answer...
• Do I Need to Make Fuel Pump Modications before I Install a Edge Comp for Dodge Cummins, # EP30301
  Your diesel mechanic is giving you sound advice. I researched your truck and found that the fuel pump systems in your generation of Dodge Rams are notorious for going out, and with the addition of a programmer on your vehicle, you will accelerate the chances of the pump going out and causing even more damage. Depending on the power goals you have for your truck, you may not need the 95 GPH FASS system, as there is a economical 89 GPH FASS that might work for your truck. As a rule of thumb,...
  view full answer...
• Can The Edge COMP # EP30301 Be Used with the Edge A2 Monitor on a 2002 Dodge Ram 3500 Diesel?
  If your are speaking of the A2 monitor that has been discontinued by Edge, it will not work with Edge Comp models of performance modules.
  view full answer...
• MAP Sensor Wiring Harness and Fuel Injection Pump Location on 2000 Dodge Ram 3500 Diesel
  If you are using Edge programmer # EP30301 that could be the problem. It is not a fit for a 2000 Dodge Ram 3500. It only fits 2001 to 2002 Rams with the 5.9 liter I6 diesel motor. The one for a 2000 Ram with the 5.9 diesel is # EP30300. On # EP30300 the gray wire with the red connector on it will connect to the fuel injection pump. The round, black connectors go to the map sensor. For the map connection you will need to look for the stock wiring harness at the boost sensor. According...
  view full answer...
  
• Horsepower and Torque Boost on Edge Programmer for 2017 Ram 3500
  I'm not exactly sure where your numbers in your example came from but I think you're referencing the Edge Comp # EP30301 which is not compatible with the 2017 Ram. It's for older models of the Ram with the 5.9L. The two programmers that will work with the 2017 Ram 3500 are the Edge Juice with Attitude CS2 # EP31407 and # EP31507. The difference being the 5 inch color touch screen. Here are the boost numbers you can gain with the 800 torque transmission on the 2017 Ram: POWER LEVEL...
  view full answer...
• How will the Transmission of a 2001 Dodge Ram Cummins Handle the Edge Comp EZD1000A
  The Edge Comp part # EP30301 has been confirmed as a fit for your 24 valve Cummins in your 2001 Dodge Ram and can give an additional 120 horsepower and 350 ft. lbs of torque. Any time you increase the power levels of a vehicle you greatly increase the likelihood of finding the weak spot in the driveline of the vehicle. With 350 additional ft lbs of torque and an abusive driving style you are going to push the limits of the transmission. And by that I mean it's most likely going to fail. Typically...
  view full answer...

Do you have a question about this Performance Chip?