Derale Stainless Steel Hose Clamps (4 Piece)

See what our Experts say about this Derale Accessories and Parts

• Will Derale Remote Dual Oil Filter Mount Kit , # D15707, Fit on 1999 Lexus RX300
  On the Derale Remote Dual Oil Filter Mount Kit, # D15707, it allows you to put your filter in a convenient location for easier oil changes. It is a dual oil filter, so it will give you additional filtration and increased oil capacity, it does not allow you to bypass the oil filter. I would also recommend the Derale High-Temperature Replacement Hose for Engine Applications - 25' Long, # D15799,and the Derale Stainless Steel Hose Clamps (4 Piece), # D13008.
  view full answer...
• Recommended Transmission Cooler for a 2013 Chevy Tahoe
  I have the perfect transmission cooler option for you. Generally speaking, the best transmission cooler to use would be the largest one you have available space for. The best place to install a transmission cooler is in front of the radiator/condenser behind the grill on your 2013 Chevy Tahoe. I recommend using the Derale 25-Row, High-Performance, Stacked-Plate Cooler part # D52508 because the plate and fin technology incorporated into this transmission cooler is far more efficient than...
  view full answer...
  
• Most Efficient Transmission Cooler Recommendation for 2015 Chevy Silverado 1500
  The most efficient style of transmission cooler is the stacked plate style like the part # D54012 that you referenced. So for the largest one in this style you'd want the # D54010 which measures 13W x 13-7/8T x 2D Inch and you'd have an extremely efficient cooler. To complete the installation you will want two of the barb hose fittings, part # D98202, replacement rubber hose # D15799, hose clamps # D13008 and insta-dapt radiator adapter # D13004. The mounting kit is # D50020.
  view full answer...
• Engine Oil Cooler with Thermostat for a 2006 Toyota Tacoma with V6 Motor
  First you would need an engine oil cooler kit. I recommend # D15502 because it comes with multiple thread types and has the proper O-ring size for a V-6 Toyota motor. The sandwich adapter included is thermostatic so a separate thermostat is not required. Oil that is cooler than 180 degrees will bypass the heat exchanger, so your engine will warm up faster. You may need some extra hose like # D15700 for 10 feet. And for hose clamps use # D13008. I have included a couple of links to oil...
  view full answer...
• Will the Derale Spin-On Remote Oil Filter Adapter Work on a 1964 Ford Interceptor Y block 312 CID
  The Derale Premium Spin-On Adapter Kit - 3/4-16 Engine Filter Threads, item # D35703, is designed to replace the adapter that goes on the engine block filter landing. My reference guide only goes back to 1965 but I am confident that the 3/4-16 threads will work on your 1964 Ford motors. 312 CID translates to 5.1 Liters which is most likely what they now call the 5.0 liter Ford engine. Along with the spin on adapter you will need the Derale 1/2 inch NPT Male x 1/2 inch Barb Straight Hose...
  view full answer...
• Derale 40-Row Transmission Cooler For a 1997 Ford F-250 Heavy Duty Pickup
  To use the Derale 40-Row, High-Performance, Stacked-Plate Cooler # D54006 on your 1997 Ford F-250 you will a few parts to attach to your 5/16" transmission line. First you need two if the Derale -6 AN Female Swivel x 3/8" Barb Hose Fittings # D98200 to convert the AN fittings on the cooler. Then you will need some 3/8" Derale High-Temperature Replacement Hose # D13016 which comes in a 5' length. Depending on the placement of your cooler you may need 2 of these. The Derale Stainless Steel...
  view full answer...
• Can Extra Ports on Filter Landing of Derale D15749 Relocation Kit Be Used to Install an Oil Cooler
  You certainly can. To install a cooler, you'd just need a cooler such as # D15452, two fittings, part # D98103, some replacement hose like # D15701 and some pipe clamps like # D13008. Remove the plugs, install the fittings, place the cooler where it'll catch air and run the hose. You'll want to use teflon tape like # A05-0265 on the fittings installed into the filter landing.
  view full answer...
• Transmission Cooler Recommendation for 2012 Ram 3500, 6.7 Cummins with 6 spd Automatic
  The best way to install a supplemental transmission cooler in line with a factory transmission cooler is to put the supplemental cooler after the factory cooler. To do that you will need to determine which of the lines from the factory cooler is the outlet. To do that you will want to start your truck when its cold, put it in drive for about 10 seconds with the brake on, put it back in park and shut the truck off. Next you will want to grab both transmission lines feeding into the cooler....
  view full answer...
• Adding an Engine Oil Cooler and a Power Steering Cooler to a 2007 Toyota 4Runner SR5 4.0L V6
  Thanks for asking about a Power Steering Cooler and Engine Oil cooler for your 2007 Toyota 4Runner SR5 V6. Adding two more coolers is not going to present a cooling issue for your engine/radiator. The coolers allow air to flow through them and will not transfer enough heat to the air going through them to effect the cooling performance of the vehicle's radiator. Your engine oil filter has 3/4-16 threads. So you can determine the correct threads to use from the recommended kits below,...
  view full answer...
• How To Reduce Both Engine Oil and Transmission Fluid Temps On A 2005 GMC Sierra 2500 While Towing
  I have attached a list of parts that I recommend for your 2005 GMC Sierra 2500 to help with cooling both the engine oil and transmission fluid while towing. Derale Hyper-Cool Remote Transmission Cooler Kit part # D15960 Derale Hyper-Cool Remote Engine Cooler Kit part # D15660 Derale Snap-In Radiator Adapter Fitting part # D13035 Derale High-Temperature Replacement Hose part # D15799 Derale Stainless Steel Hose Clamps part # D13008 1/2" Barb to 1/2" Barb Union Fitting part (Local Auto...
  view full answer...
• Recommended Transmission Cooler and Parts Needed for Installation on 2011 GMC Sierra
  For your 2011 GMC Sierra I recommend using a Derale 10,000 Series Stacked-Plate Cooler with -10 AN Fittings, like # D52510. I spoke with my contact at Derale and he said these coolers are popular among Allison transmission owners. When choosing a transmission cooler, the largest cooler that will fit in the space available in your engine compartment is typically the best. Generally speaking, the larger the cooler the better the cooler performance. A stacked-plate cooler is the most efficient...
  view full answer...
• Parts Needed to Install Transmission Cooler # D13311 in a 2011 Jeep Liberty
  You would need the AN fitting adapters part # D98200 for each end of the cooler and then the clamps part # D13008 for securing the hose to the line, and for hose part # D13016. Most likely you will also need the insta-dapt fitting part # D13004 as well.
  view full answer...
• Parts Needed to Mount a Transmission Cooler on a 1999 Toyota Camry
  Derale Series 7000 Tube-Fin Cooler Core # D13317 is just a core, not a kit, so it does not include mounting hardware, hose, or fittings. The kits can be found in the link provided and do include all of these items. Since you already have the core though you will not need another kit. The kits include the following parts: Hose clamps, # D13008 Hose, # D13003 Universal mount kit, # D13001 Insta-Dapt fitting, # D13004 These are the parts you will need.
  view full answer...
• What is the Length of the Hose in the Derale 8000 Series Transmission Coolers
  The hose that comes with the # D13502 and # D13503 transmission coolers is 4 ft long. This is the same with all Derale 8000 Series transmission coolers. If you need additional hose length, we offer a 4 ft long individual hose, # D13003, and a 25 ft hose, # D13007. You may also need additional hose clamps, # D13008, if you purchase additional hoses.
  view full answer...
• Recommended Frame Rail Fluid Cooler for 200r4 Transmission on 1946 Chevy Truck
  The Derale 24" Frame Rail Fluid Cooler with -6 AN Inlets # D13225 is a great option. It does not require lines to the front of your truck to cool your transmission. There is not a longer option available, but you can run the Derale 17" Frame Rail Fluid Cooler with - 6 AN Inlets # D13221 as well if increased cooling is desired and you need to be under 45 inches. You may also be interested in the Derale -6 AN Female Swivel x 3/8" Barb Hose Fitting # D98200, Derale High-Temperature Replacement...
  view full answer...
• Transmission and Power Steering Cooler Recommendation for a 2005 Honda Odyssey
  Since you are planning on buying a transmission cooler like the Derale Transmission Cooler, part # D13502, I would consider purchasing the Derale Combination Cooler Core, part # D15321. This cooler can be used for cooling both the transmission fluid and the power steering fluid on your vehicle in one compact package, see photo at right. You will need to measure to decide if you will be able to mount the transmission cooler first. The dimensions of the Derale Combination Cooler Core are...
  view full answer...
  
• Transmission Cooler Recommendation for 2007 Dodge Ram with Cummins Diesel
  For a full size diesel truck you'd need all the cooling power you can get if you plan to bypass your factory cooler. Stacked plate coolers are the most efficient styles of coolers around so the part # D54010 would be your best option. To complete the installation you will want two of the barb hose fittings, part # D98202, replacement rubber hose # D15799, hose clamps # D13008 and insta-dapt radiator adapter # D13004. The mounting kit is # D50020.
  view full answer...
• Power Steering Cooler Recommendation for an Off-road Rock Crawler
  Typically, in automotive applications, the addition of a supplemental cooler will drop the fluid temperature around 10 to 20 degrees Fahrenheit. Keep in mind, this is with the cooler mounted directly behind a vehicle grille, receiving good airflow. For your situation, I would recommend a different product. The power steering cooler, # D13310, that you referenced will help, but the lack of airflow will probably not give you the results you are looking for. Instead, I recommend looking...
  view full answer...
  
• Recommended Transmission Cooler for 2001 Toyota Tacoma
  For your 2001 Tacoma I recommend the Derale Series 8000 Plate-Fin Transmission Cooler Kit, part # D13502. This is a Class lll cooler that measures 11-inches wide, 7-1/4 inches tall, and 7/8-inches deep. This cooler is recommended for mid-size cars, SUVs, and trucks like your Tacoma. I have attached a drawing that shows how the hoses need to be run when installing the cooler. If you find your hose is not long enough to attach to the new cooler, you may need an additional Derale Insta-Dapt...
  view full answer...
  
• Type of Hose and Hose Clamps for Use with Oil Filter Relocation Kit
  Oil pressure can vary as you can see on the gauge of your dashboard when the engine is running. With our oil filter relocation kits like the part # D15707 that you referenced we recommend high temp hose like the part # D15799 and hose clamps like the part # D13008 and there isn't any issue with the lines or pressures. I would not run this type of hose without hose clamps though as that's most likely going to create a huge mess and potentially damage the engine.
  view full answer...
• Remote Dual Oil Filter Mount Kit # D15707 for a 2003 Jeep Wrangler X with 4.0 Liter
  Derale remote dual oil filter mount # D15707 is not vehicle specific so you would be able to use it on your 2003 Jeep Wrangler X. The filters that you use with this kit would have to have 3/4"-16 threads. If additional hose is needed you can use # D15700 for a 10 foot long section. And for hose clamps use # D13008.
  view full answer...
• How Long is the Hose in Derale Engine Oil Cooler # D15405 for a 2014 Ram 1500 5.7 Liter
  The Derale oil cooler # D15405 comes with 10 feet of 1/2 inch hose. You could add another 10 feet using # D15700. Then you would just need a 1/2 inch line to 1/2 inch line hose barb fitting from an auto parts store and some additional hose clamps # D13008. For transmission cooler # D13503 there are no special fittings required for installation. But if the included Insta-dapt fitting does not fit your external transmission cooler and the stock lines are metal you would need to cut and flare...
  view full answer...
• Remote Transmission Cooler and Mounting Accessories for a 2004 Chevy Suburban 5.3 Liter
  Using the GM-specific snap-in radiator adapter fitting # D13035 will make installing a transmission cooler such as # D12733 easier because with it you would not have to cut and flare any lines for installation. The core on this cooler has 6 AN fittings. This cooler does not come with a thermostat but one can be added using # D13021. You will also need a mounting kit such as # D13002, hose clamps such as # D13008, and hose # D13017. The other option is a remote cooler that comes with these...
  view full answer...
• Fittings and Other Parts Needed to Install Transmission Cooler D52508 in a 2010 Chevy Tahoe
  Derale Snap-In Radiator Adapter Fitting # D13035 is recommended when installing a transmission cooler on the 2010 Chevy Tahoe. I have linked a video featuring this fitting for you. In addition to the fitting and the core, # D52508, you will also need a bracket kit # D50020 to mount the cooler, hose clamps, # D13008, and about 10 feet of hose, # D15700. We also have a 25 foot length of hose, # D15799, if you want to err on the side of caution; especially if you are also installing a bypass...
  view full answer...

Do you have a question about this Accessories and Part?