Transmission Cooler Recommendation for 2012 Ram 3500, 6.7 Cummins with 6 spd Automatic
Question:
My truck has a stock cooler/AC condenser mounted forward of the radiator. I want to install a D51608 cooler in series with it. Please suggest the best way to do it and what additional parts will I need. Where should I locate the cooler Do you sell the extra parts I need?
asked by: Fred S
Expert Reply:
The best way to install a supplemental transmission cooler in line with a factory transmission cooler is to put the supplemental cooler after the factory cooler. To do that you will need to determine which of the lines from the factory cooler is the outlet. To do that you will want to start your truck when its cold, put it in drive for about 10 seconds with the brake on, put it back in park and shut the truck off. Next you will want to grab both transmission lines feeding into the cooler. Whichever is cooler is the outlet and the one you will route to the supplemental cooler.
You should have plenty of room in front of your radiator for the Derale 16-Row Cooler # D51608 to fit. You will want to put it wherever it will get the most air flow.
For additional parts you will probably want the following:
Bracket Kit for Stacked Plate Coolers # D50020
Derale Stainless Steel Hose Clamps # D13008
Derale High-Temperature Transmission Cooler Line 25 feet # D13017
A quantity of (2) Derale -8 AN Barb Hose Fittings # D98202
Derale Insta-Dapt Radiator Adapter # D13004
I attached a couple helpful links on transmission coolers and installs that you might find helpful also.
Products Referenced in This Question
Derale Insta-Dapt Radiator Adapter
- Accessories and Parts
- Transmission Coolers
- Radiator Adapters
- Derale
more information >
Derale Stainless Steel Hose Clamps (4 Piece)
- Accessories and Parts
- Transmission Coolers
- Hose Clamps
- Derale
more information >
Derale High-Temperature Replacement Hose for Transmission - 3/8" Inner Diameter - 25' Long
- Accessories and Parts
- Transmission Coolers
- Hoses
- 3/8 Inch Inner Diameter
- 25 Feet Long
- Derale
more information >
Bracket Kit for Derale High Performance Stacked-Plate Coolers
- Accessories and Parts
- Transmission Coolers
- Mounting Hardware
- Brackets
- Derale
more information >
Derale -8 AN Female Swivel x 1/2" Barb Hose Fitting
- Accessories and Parts
- Transmission Coolers
- Fittings
- -8 AN x 1/2 Hose Barb
- Derale
more information >
Product Page this Question was Asked From
Derale 16-Row, High-Performance, Stacked-Plate Cooler with -8 AN Fittings - Class IV
- Transmission Coolers
- Stacked-Plate Cooler
- Full-Size Truck
- SUV
- Standard Mount
- 13W x 6-9/16T x 2D Inch
- With - 8 AN Inlets
- Derale
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Search Results: prodigy 2 brake controller wiring harness
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Dexter Hydraulic Drum Brake Assembly - Duo Servo - 12-1/4" - Left Hand - 8,000 lbs
- Q&A: Installing Tekonsha P3 Brake Controller # 90195 on 2012 Dodge Ram 1500 w/ No Tow Package
- Q&A: Can Derale Series 9000 Plate-Fin Transmission Cooler Replace OEM Cooler on 2010 Ford Escape
- Article: Transmission Cooler
- Q&A: Can Transmission Cooler be Installed on a Vehicle with Sealed Transmission
- Q&A: Does Flex a Lite Transmission Cooler part # FLX40008 Fit 2017 Chevrolet Colorado
- Q&A: Is a Transmission Cooler Needed and Do I Need Additional Fluid
- Q&A: Transmission Cooler Recommendation for a 2005 Hummer H2
- Q&A: Will Remote Transmission Cooler D15960 Be Enough for a 2011 Chevy Silverado Towing an 8k 5th Wheel
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Trailer Wiring Diagrams