To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.
Features:
Specs:
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located in your rear cargo area. To access this harness you will have to remove the rear scuff panel and some interior trim.
Once installation is complete, the 4-way connector will be stowed in an out-of-the-way location within your trunk.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A tail light converter is built into this T-connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
Average Customer Rating: 4.8 out of 5 stars (44 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.The instructions could have had more good pictures to make it crystal clear for the install, but overall, I'm very pleased with how this works.
Easy install. Good instructions. Used it to install on a 2021 Hyunda Kona.
Overall, a great hitch that perform as needed for a 2022 Kona. Box arrived on-time, with some tears, but nothing missing. Installation was moderate effort; the fishwires were challenging, but once in place they worked. My Kona is FWD but I still had to drop the exhaust to get the right side of the hitch lined up. There was no model-specific wiring harness for the 22 Kona, so I used the generic CURT 56187 powered harness and positap connectors.
Harness fit perfectly on a 2021 Kona EV. While the vehicle connectors were hard to reach, the Curt harness allowed me to wire for a trailer without damaging the factory wiring. I powered the converter box using a switched 12V circuit so there would be 0 current draw to cause battery drain while parked, an issue with EVs.
This curt electrical kit was so easy to install. Less than 30 minutes. Direct plugs into the car electrical made this beyond simple. Love etrailers ability to line up products that are exact fit to whatever vehicle you have. Im on at least 8 hitches & wiring kits, and Etrailer delivered 100% on all….
the connectors in my car are 8 pin (orange color) and the harness that i received from etrailer.com is a 3 pin (blue color) I have asked customer service about this problem but not much help yet. While researching on the web i found that my car connector is called G11E8 (8-Pin Connector) and obviously it doesnt fit the 3 pin connector from the wiring harness i received
Jenny N.
12/28/2022
Of course making the right connections is important. I reached out to Curt and found that the G11E8 8 pin connector is typically the blind spot monitoring connector. The tail light connector is hard to get to. I recommend viewing the video installation that we have on a 2020 Hyundai Kona and look at time stamp 10:15. It is possible that the connector would not be blue however it would match the wiring harness connector to connect together.
Good product, easy to install. Your videos on YouTube are great.
Very easy ,plug and play
The wiring harness for my 2018 Kona is relatively easy to install. The video on the etrailer site explains of all of the components is professionally done. In the video she comments that the black and white photos on the instruction sheets are grainy and they definitely are . I suggest adding a link to a video actually going through an install. I found one on line and it clarified questions that I had about the taillight plugs . The video shows how to get easier access by removing several body pins to peel open the bumper corners instead of going up through the bottom .
Joe
4/10/2022
Very well thank you. I use my trailer weekly and my running lights work perfectly
Should of just said to take back under Gaurd out to hook up lights it was easy but sticking hand down hole not work
Mark
7/13/2022
Great no problems
It's always nice when you buy a product and it is the correct one the first time. I got this kit thinking it would be an all day event to figure out and instal. I was wrong! everything fit as it came. Nothing had to be modified or added. All in all, very easy to install on my 2021 Kona.
My local shop said they couldn't get a harness for my car. And no class 3 hitch. So I found both on etrailer, and ordered both. I can't say enough good things about etrailer. My only complaint is that one place on the install video, the location of the clip to unhook wasn't very clear. I spent an hour trying to unhook the wrong clip. Found the location on a different youtube video. But otherwise, everything was great.
This product does what it is supposed to. The problem is, it goes on a hyandai Kona, which is a horrible design. Put the light adapter on before you put the receiver hitch on.
Great customer service ! Package arrived in perfect condition. Will buy again from this company no doubt !
Good service from staff, but slow shipping with no tracking to schedule installation on car in advance. Ordered hitch from [online} as no stock at etrailer until February.
Helpful install video!
When I received my original order there was some pieces missing. I called etrailer and they said they would ship it right out. I received the parts in two days!!!! They were very fast in getting them out to me. Very good customer service!! Thank you so much for your super fast delivery!!
Easy plug and play. Watched a install video and fallowed the instructions, went together pretty easy. If you are putting the hitch on also do the wiring before the hitch it makes it easier to get to all the connections.
Went above and beyond!
Order can in timely manner and had ever thing that I need to do the job. Thanks Stacey
everything is working great, very happy with my item.it was a perfect fit.
The product was everything it was supposed to be. Package arrived in two days so was happy to install it early.
All is perfect.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Paul
12/10/2023
No problems in the first year. Instructions on this were good. It has connected our little tear on a few trips.