Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
(46 reviews)
Price: $204.81
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Item # C11120
Retail:$289.95
Our Price: $204.81
You Save: $85.14
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (46)
- Q & A (0)
- Photos
CURT Trailer Hitch - C11120
- Class I
- 1-1/4 Inch Hitch
- 2000 lbs GTW
- Concealed Cross Tube
- CURT
- 200 lbs TW
- Custom Fit Hitch
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Drawbar, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
11120 Curt Class 1 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2012 - 2014 Subaru Impreza 5-Door Wagon - WRX and WRX Sti
- 2008 - 2011 Subaru Impreza 5-Door Wagon with Quad Exhaust
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11120
Average Customer Rating: 4.6 out of 5 stars (46 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.by: Chris09/01/2018
2014 Subaru Impreza
Good clearance even with my large aftermarket exhaust. I am happy to report this works seamlessly with my nameless exhaust. I was worried that the bigger pipes and different design of my exhaust wouldn't clear the hitch, but this hitch design seems to give as much space for exhausts as possible.
It took me and my friend a good 3 hours to do this, mostly because I had two polyurethane exhaust hangers that are a pain to get off, and we incrementally cut some fascia off and tried test fitting the hitch about 5 times. We had to cut a good bit more than the instructions say, and we were a little hesitant to cut too much. After we cut enough fascia away though, the hitch went in pretty easily.
by: Gian C05/09/2013
2013 Subaru Impreza
The installation took slightly longer than expected in my 2013 Impreza STI. I made the right decision to completely remove the muffler and 4 pipe exhaust, which is easily detached from the rest of the exhaust system.
I also ended up having to trim the bumper 1-5/8" x 4-1/2" instead of the recommended 4". Maybe the 2013 bumper is slightly lower.
In all, the installation was relatively easy to do.
I can now haul my mountain bike easily.
Nick
5/25/2013
Great write up and nice install. Glad to see the hitch installs with the SPT exhaust. Ill be installing a hitch on my 13 hatch this weekend MTB rack also. What did you use to make the cuts? Thx
Gian C.
5/9/2014
After a year of use the hitch is still performing as expected. I haul my bike almost weekly around town and in the highways with no issue.
by: Richard03/05/2023
2008 Subaru Impreza
2008 wrx with sti exhuast. Hitch mounted up perfectly according to the directions. No issues at all. I trimmed a little to much of the facia but I think it’s ok.
by: Shak06/14/2014
The installation could have been much faster if there were 4 fish wires instead of only 2. I managed to bump both of the forward fasteners into the frame and had to suck them out with magnets, pocket screwdrivers, and going to a U haul to buy another fish wire (the guy was nice enough to give me one). The fit so far seems good (took it for a spin around the block unloaded).
by: Kevin C.08/05/2014
2014 Subaru WRX
2014 Subaru WRX. It was a little more timely than I thought, but I am sure it is because of my inexperience. Everything worked as advertised! 2 things that made it easier and wasn't too hard: 1. Remove rear bumper, 2. remove muffler hangers. There are youtube vids for both of these.
by: Jon B02/10/2020
Good quality and fitment. Everything is hidden except the receiver, and Worked with my aftermarket 3" exhaust which was what I was looking for.
by: Jason 08/17/2023
2014 Subaru Impreza
Fast delivery, exactly what I needed for my Subaru Impreza.
by: Cole01/18/2024
Great product, quick and easy install.
by: Baron G06/23/2017
2014 Subaru Impreza
Haven't used it more than once yet but so far works great for holding my bike. Install was pretty easy but took a little longer than expected. Removing muffler made it a lot easy to do.
Baron G.
6/23/2018
Still working great no problems at all
by: Dylan D02/22/2020
2008 Subaru Impreza
Everything needed, including wiring was shipped very quickly. Installation wasn’t bad at all. Wiring was very simple.
by: Kent J06/08/2012
Subaru Impreza
Fits perfectly! Some cutting required, but went very smoothly.
Great instructions too.
by: Jeff11/27/2022
Solid hitch. Had u-haul put it on my 2013 sti hatchback. Use it for a 1up bike rack. Would be 5 stars but hitch paint got scuffed in shipping when a part broke through the cardboard.
by: Steve G.05/25/2015
2013 Subaru Impreza
This is my 4th hitch from Etrailer. I have yet to have one arrive in an intact box :).
As another reviewer stated, it is much easier to remove the bumper cover for this install than struggle with the cramped spaces to fish the bolts for the bumper mounting points. It also makes trimming the bumper cover much easier.
Steve G.
5/26/2016
I use the hitch on a regular basis and hauled multiple 1200 lb loads with no problem. The paint is holding up.
by: Derek04/14/2019
2011 Subaru Impreza
Customer service: 5/5
Shipping: 4/5
Website description: 1/5
The etrailer website described part #C11120 as compatible with 2013 Subaru hatchback but didn't specify specifically for dual-exhaust WRX or WRX-STI.
The hitch itself was affordable, durable, and came with clear installation instructions. I would recommend calling to confirm the hitch meets your exact vehicle specifications before ordering because this item was not eligible for a refund or exchange.
Mike L.
4/17/2019
We show the hitch as a fit for the 5-door wagon, but not the Sedan. The hitch is compatible with the quad-tip exhaust.
by: Bradley04/26/2021
Awesome love the products my Subaru loves pulling my camper to New Hampshire and and getting hay weekly and yes my 2011 Subaru wrx pulls hard
by: Jimmy B03/08/2017
2014 Subaru Impreza
Received the hitch within a week of ordering. Installed it in about 2.5 hours. Directions were right on. Very happy with the hitch.
Jim B.
3/15/2018
Great
by: Greg I03/18/2020
Works PERFECTLY on my 2013 STI hatchback. I cut slits in the bottom of the bumper cover to create a flap that would fold up and clear receiver tube. The cut cannnot be seen unless you get on the ground looking up at it. With my 1up bike rack, the fit is as if the whole system was designed to work together. The single rack folds up with only a fraction of an inch to clear the bumper. When I install a second add-on rack, it still folds up with a fraction of an inch for hatch door to clear when opening and closing.
by: larry02/22/2013
2013 Subaru WRX
I installed this hitch and the 5614kit for my trailer wiring on my 2013 wrx base model hatchback with the quad tip muffler. The hitch works like it should i pull my 14ft jon boat around with no problems. Installation wasnt bad but i work on cars for a living. If youre going to install solo the easiest way is to remove muffler completely and also remove rear bumper completely. I say this because two of the mounting points are to the back side of the rear bumper reinforcement beam. They mount horizontally the slightest twitch and the bolts provided will fall into the re-bar and youre not getting them back with the bumper on easily. They should provide some type of locking washer to keep the bolts from doing this. One that slides over bolt but does not easily come back off. Also with the bumper off you can keep test fitting and trimming the bumper more easily... I did not want a gaping hole in my bumper ( you cant install hitch until you make the cut out in the bumper.) after installed its fairly discreet no complaints there. As far as the wiring... If you have a 2013 wrx go ahead and take out the rear interior. There are no access holes in the trim panels for splicing the converter box wiring into your factory lights. I ran the power wire under the car through a rubber plug under the spare tire. You could just pop out the tail ligts and run all wires out of the car including the box, but if you want the majority of everything out of the elements theres really no super easy way for this paticular car, but the product itself works like a champ. Shipping was fast nothing was damaged and for a good price. Id use etrailer again.
by: David06/07/2020
I ordered trailer hitches for both of our Subaru vehicles. The etrailer price, service, delivery, and quality were excellent on all counts. One vehicle is a WRX with Subaru SPT quad exhaust. etrailer and only etrailer had a hitch to fit the vehicle. A portion of the aerodynamic spoiler under the bumper required cutting and all went well because of the detailed downloadable installation instructions on the etrailer website. Very detailed. Very complete. The final product looks "factory" and works as advertised. I'm a very happy customer!
by: Dave10/13/2015
2014 Subaru Impreza
The hitch installed easily with just 4 bolts. Only gripe is that you have to trim the bumper fascia; however, the detailed instructions come printed in color.
I haven't been able use my accessories yet because the 1.25" to 2" adapter I got wobbles way too much for my application. The hitch itself is really solid.
by: Hans 02/02/2022
I've been using the receiver non-stop since I got it a year ago. It hasn't had any issues since I've been running it and has been something that has truly been set it and forget it. The only initial hang-up I had was installing it, I followed the video tutorial but in the end I found taking the plastic bumper off my car ended up making the install easier since it gave me more room for my hands to reach into tight spaces required to tighten the fasteners. After the bumper removal install went super smoothly and I have been on countless adventures with my bikes now that I can easily throw them on my car.
by: Doug07/20/2011
Hitch installed very easily and is extremely secure. The fishwire system looks complicated in the instructions, but I found it to be very intuitive and it works great! Curt really thought this one through. Total install time for an amateur working alone was 1:45, but it was not particularly difficult. No drilling or filing required.
by: Bill 11/22/2021
I have a lowered 2011 WRX with afterQ AAAAA market exhaust. So I was just a little apprehensive with how the hitch was going to fit. But I have to say it went in per instructions and it took me only an hour, even with stopping to read instructions. The only thing I would do differently is cut an additional 1/2” of rear bumper skin as it makes contact with receiver. But all and all Easy job and great fit. Thank you.
by: Rudy K.07/09/2012
2012 Subaru Impreza
Hitch was delivered very quickly. Instructions were clear, and the hitch fit well. Rather than dropping the exhaust, I removed the muffler to gain better access. From a quick search, this sounds pretty typical. Fascia trimming wasn't excessive nor difficult (I used a soldering iron with a cutting tip). I'm very happy with the final result.
25
46
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Is A Trailer Hitch Available For My 2011 Subaru Impreza WRX 5-Door Wagon w/ Dual ExahaustFor your 2011 Subaru Impreza WRX hatchback wagon, you will need the CURT Trailer Hitch Receiver, part # C11120, which fits the Wagon model with dual exhaust and quad exhaust tips.This CURT hitch is Class I 1-1/4 inch hitch, and includes a drawbar, pin and clip. To complete your towing setup, you may be interested in the following: Curt Wiring, part # C56111 1-7/8 Inch Hitch Ball, part # 19256 For hitch accessories such as bike racks, you will be limited to those that are compatible with...
view full answer... - How to Determine Clearance at Rear of Vehicle When Using NEO2 Hitch Bike RackCurt trailer hitch fits for your 2013 Subaru Impreza Sport Hatchback depend on its specific version; hitch # C11286 fits the 5-door hatchback with single exhaust; hitch # C11120 fits the 5-door hatchback WRX and WRX-Sti versions. When we installed hitch # C11286 on a 2013 Impreza we found the hitch pin hole was 2-inches forward of the back edge of the bumper cover, as shown in the linked installation video. The bike rack you referenced, the NEO2 # B01748, provides 12-inches of clearance...
view full answer... - Trailer Hitch for 2011 Subaru Outback Impreza Sport The Curt receiver hitch item # C11315 you were looking at will fit your 2011 Subaru Outback Impreza Sport so long as you have the single exhaust. This hitch receiver is custom fit, designed specifically for your vehicle, and requires no welding. It has a 2000 lbs towing capacity and a 200 lbs max tongue weight. If your Subaru Outback has the quad exhaust, I recommend the Curt receiver hitch item # C11120. This is an equivalent hitch receiver from the same manufacturer it just accommodates...
view full answer... - Trailer Hitch and Bike Rack Recommendations for a 2012 Subaru Impreza Sport HatchbackIn terms of a trunk mount bike rack, that rear piece you have described that also holds the third brake light on your 2012 Subaru Impreza hatchback does count as a spoiler. The problem is that piece is not designed or rated for the additional weight of a rack. The safest option and best way to carry bikes is to use a trailer hitch and hitch mount bike rack. If you have a WRX or WRX STi model with quad exhaust then you can use trailer hitch # C11120. If you have single tip exhaust you can...
view full answer... - Trailer Hitch for a 2013 Subaru Impreza 5-Door WRX with Factory Quad ExhaustCurt trailer hitch # C11120 is the right hitch for you. It will fit your 2013 Subaru Impreza WRX wagon with quad exhaust. CAT in CAT back is catalytic converter. Back means that the part of the exhaust starting behind the catalytic converter(s) back to the exhaust tips. If it is all factory exhaust then you will not have a problem! There is some trimming of the lower rear fascia (not visible) where the receiver will be. I have included a trim diagram along with a link to the instructions...
view full answer...
- Will Curt Trailer Hitch 11120 Fit a Base Model 2013 Subaru Impreza Hatchback with Single ExhaustCurt trailer hitch # C11120 is only listed as a fit for 2011 Impreza hatchbacks with quad exhaust and 2012 to 2014 WRX/WRX STi hatchback models with quad exhaust. It hasn't been tested or confirmed to fit a base model. I wouldn't say it is more hidden than Curt hitch # C11286 which fits the single exhaust hatchback models. On both vehicles/hitches, only the receivers are visible. I have included a picture showing hitch # C11286 on a single exhaust hatchback model for you. I think the...
view full answer...
- Trailer Hitch Recommendation for a 2013 Subaru ImprezaYou will need to get a new hitch for your 2013 Subaru Impreza, the Curt Hitch # C11315 that you referenced is only designed to work on Imprezas from 2008-2011 so it would not work for your 2013 even though they look similar. I would recommend the Curt Hitch # C11286 if you have a hatchback with single exhaust, Curt Hitch # C11120 if you have a hatchback WRX with quad tip exhaust, or Curt Hitch # C11317 if you have a Sedan WRX.
view full answer... - Will Swagman Trailhead Hitch-Mount 2-Bike Carrier # S63360 Fit 2014 Subaru Impreza HatchbackThe particular hitch receiver fits for your 2014 Subaru Impreza Hatchback (wagon) vary depending on the configuration of the exhaust. However, all of the hitches we offer are the 1-1/4-inch size and all are rated as Class I hitches. This means they are light-duty hitches that can carry up to 2 bikes, but no more than two. If you have the WRX or WRX-STi (with a quad tip exhaust) you can install hitch # C11120 from Curt. If your hatchback has a single exhaust you have a choice of three hitches,...
view full answer... - Recommended Hitch for a 2012 Subaru Impreza to use a Bike RackThe most economically priced options for a hitch on your 2012 Subaru Impreza 5 door Wagon is going to depend on whether you have a WRX/WRX Sti or not. If you DO have the WRX/WRX Sti then the hitch that you want is the Curt Trailer Hitch Receiver # C11120. If you DO NOT have the WRX/WRX Sti then the hitch that you want is the Curt Trailer Hitch Receiver # C11286. Both of these hitches are made in the USA, have a bolt-on, no-drill installation and will provide you with a Class I, 1-1/4"...
view full answer... - Fascia Trimming Required to Install Curt Class I Part # C11120 on 2011 Subaru ImprezaThe lower bumper fascia would need to be trimmed approximately 1-5/8 inches by 4 inches. You can get a better idea of the necessary trimming by checking the install instructions, and looking at the photo I produced for you. Remember the old woodworkers adage: Measure twice, cut once. If you were planning on using the receiver as a mounting point for a bike rack or cargo carrier, be aware that Curt requires the use of a stabilizing strap like part # 18050. Failure to use a stabilizing...
view full answer...
- Hitch Recommendation for 2011 Subaru Impreza 2.5iThe Draw-Tite Max Frame Class II Hitch # 76209 is not confirmed to fit on the 2011 Subaru Impreza but we do have hitches that will fit your vehicle. Whether or not you have the Sedan or Wagon is going to be the first determining factor. I've created a quick list of hitches that are going to work with each trim package/car body below. If you have the 2011 Subaru Impreza Wagon: w/ Single Exhaust - # DT24959 Draw-Tite Sport Frame Class I Hitch w/ Quad Exhaust - # C11120 Curt Class I Trailer...
view full answer... - Hitch Recommendations for a 2012 Subaru Impreza Sport 5 doorI wish there was a hitch available for your 2012 Subaru Impreza that had a 2 inch opening, but at this time all we have is Class I hitches with a 1-1/4 inch opening. The Curt Trailer Hitch # C11120 that your referenced would be a good hitch as long as you have Quad Exhaust on your vehicle. If you have single exhaust you would want a Curt Hitch # C11286. I attached instructions for both hitches. As far as how hidden they will be, I attached a picture that shows both of these hitches installed...
view full answer...
- Will Curt Trailer Hitch Receiver # C11120 Fit the 2011 Subaru Impreza WRX SedanCurt hitch # C11120 for the Subaru Impreza will fit the 2011 model year of the hatchback with quad tip exhaust, and the 2012-13 hatchback WRX STi with quad tip exhaust but will not fit on the 2011 WRX STi sedan version. The rear fascia of this particular vehicle version poses an installation challenge. The hitches currently offered for your can be seen on the linked page. If you need a wiring harness you can use # 118464. For a ball mount use # 3594 and for a hitch ball use either 1-7/8-inch...
view full answer... - Meaning of Towing and Tongue Weight Capacities on Trailer Hitches for 2008 Subaru ImprezaWhen looking at a trailer hitch for your 2008 Subaru Impreza, the towing weight capacity refers to the maximum trailer weight that the hitch can safely pull. For a trailer hitch that has a 2,000 pound towing weight capacity, the most a trailer can weigh is 2,000 pounds when hooked up to this hitch. A tongue weight capacity refers to the maximum vertical load that can be placed onto the hitch receiver. This is usually more of a factor when looking at things like bike racks and cargo carriers,...
view full answer... - Trailer Hitch Options that Fit 2011 Subaru Impreza WRX Hatch with Quad ExhaustAs long as your 2011 Subaru WRX hatchback isn't a STI model we have the EcoHitch part # 306-X7261 that fits with the quad exhaust which is a hidden hitch with a 2 inch opening or we have the Curt part # C11120 which is a 1-1/4 inch hitch.
view full answer... - Trunk Mounted and Hitch Mounted Bike Rack for a 2012 Subaru Impreza 5 DoorThe Thule OutWay 2 Bike Carrier, part # TH45JV, will fit your 2012 Subaru Impreza as long as you do not have a spoiler on the back. The trunk mounted bike racks have straps that attach to the top and bottom of your rear hatch. A spoiler will interfere with this and the straps could damage the spoiler. If you do have a rear spoiler, then I would recommend a hitch and hitch mounted bike rack. We carry the Curt Class I Hitch, part # C11120, for your vehicle and the Swagman Trailhead 2 Bike...
view full answer... - Hitch Installation Instructions for 2012 Impreza HatchbackFor the 2012 Impreza Hatchback, the correct hitch would be the Curt # C11286. For WRX or WRX STi Hatchback models, the correct hitch would be # C11120. The # 11317 you mention is a fit for the WRX Sedan model only. Of all the hitch manufacturers we deal with, I believe Curt does the best job on their installation instructions. I have linked you to the instructions for both hitches mentioned above. If you click the provided link, you can see a video showing the hitch being installed on...
view full answer...
- Trailer Hitch & Related Items for 2017 Subaru Impreza 5-Door WagonOne of our main hitch suppliers,Draw-Tite, has confirmed a hitch fit for the 2017 Subaru Impreza 5-door wagon, EXCLUDING the WRX STi version that has quad exhausts. Except for that one version you can use their 1-1/4-inch Class I hitch # DT24959, installation of which is shown in the linked video. The recommended ball mount is # 3593 and with it you could use either 1-7/8-inch ball # 19256 or 2-inch ball # 19258. For a wiring harness you can use # 118573; a helpful article is linked to...
view full answer... - Will CURT Trailer Hitch # C11120 Fit a 2011 Subaru Impreza Outback Sport with Single ExhaustI do have a trailer hitch that will fit your 2011 Subaru Impreza Outback Sport model with single exhaust, but Hitch # C11120, will only fit the WRX and STI models with quad exhaust. Instead, take a look at CURT Trailer Hitch # 11315. Curt lists this hitch as a fit for the 2011 Subaru Impreza single exhaust Outback Sport models. I have included a link to the installation instructions for you. If you plan on doing some towing, the hitch comes with a ball mount, pin and clip. For a ball...
view full answer... - Recommended Hitch for 2013 Impreza Sport for Carrying Bike RackAccording to my research, the Impreza Sport is the hatchback model. The correct hitch for your vehicle will depend on whether it has single or quad-tip exhausts. For the single exhaust, I would recommend the Draw-Tite Class I receiver, part # DT24959. If you have the WRX or WRX STi model, you will need to use the Curt Class I, part # C11120. The Draw-Tite model will install without the need to drill any holes in the vehicle frame, but the holes in the frame rail will need to be enlarged...
view full answer... - Hitch Recommendation for a 2014 Subaru Impreza WRX HatchbackIf your 2014 Subaru WRX Impreza Hatchback has single exhaust then the Curt Hitch part # C11286 that you referenced would be an excellent option, if you have the quad tip exhaust you would want the Curt Hitch part # C11120. All non-trailer loads - bike racks, cargo carriers and so forth - should be supported with stabilizing straps like part # 18050. Failure to properly support these loads will void your hitch warranty from Curt. For a bike rack that is very popular with other WRX owners...
view full answer... - How to Carry Bikes on a 2012 Subaru Impreza Sport 5-Door HatchbackThe Curt trailer hitch, # C11120, only fits WRX or WRX STi models. If your 2012 Subaru Impreza hatchback falls into this category, the hitch will fit. This is a Class I trailer hitch which means that only a bike rack that is compatible with a Class I trailer hitch will fit. Adding an adapter will decrease the tongue weight capacity of the hitch by 50 percent, so I do not recommend using an adapter with this hitch. If your Impreza cannot accept the trailer hitch, you may be able to use...
view full answer... - Bike Rack and Trailer Hitch Recommendations for a 2012 Subaru Impreza 5-Door HatchbackThe Super Shuttle bike rack, # RG8015127, is not compatible with your 2012 Subaru Impreza but we do have some bike racks that are. Please note that if the vehicle has a rear spoiler, you cannot use a trunk mount bike rack. I have included a link to the trunk mount racks that are listed as a fit for the hatchback with no spoiler. The rack that is most like the Super Shuttle is the Thule Passage 3, # TH911XT. If you will be carrying womens, childrens, or alternative frame bikes, I recommend...
view full answer... - Trailer Hitch for a 2013 Subaru Impreza STi for use with a Bike RackIf your 2013 Subaru Impreza STi is a hatchback then the trailer hitch that fits is # C11120. If it is a sedan model then you would need hitch # C11317. Since you want to use the hitch for a bike rack then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch. I have linked the compatible bike racks for you. Curt also says you have to use stabilization strap # 18050 when using this...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Edited by:
Dan D
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Lori W
Written by:
Lindsey S
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Chris
9/4/2019
1 year later, hitch is still working perfectly. It got plenty of use with the Kuat NV bike rack with ebike on it over the summer. Really satisfied with the purchase.