Blazer 30 Amp Heavy-Duty Relay - 12V
(0 reviews)
Price: $8.05
In Stock
Need help with installation?
Locate installers near me- All Info
- Q & A (0)
- Videos (1)
- Photos
Blazer Accessories and Parts - BL63VR
- Wiring
- Relays
- Blazer
Use this relay to switch and add electronic devices within your vehicle's power generating system. Relay protects your devices from arcing and overloads. Rated for 30 amps.
Features:
- Heavy-duty electronic relay allows switching and adding of multiple electronic devices within your vehicle
- Mounting tab included for easy installation
Specs:
- 12 Volt
- 30 Amp
- Limited lifetime warranty
195N005W Blazer International Heavy Duty 30 Amp Relay - 12 Volt
Video of Blazer 30 Amp Heavy-Duty Relay - 12V
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Blazer 12 Volt 30 Amp Heavy-Duty Relay - BL63VR
Hi, everybody, Andy here with etrailer.com, and today, we're gonna take a real quick look at this Blazer 30 amp Heavy-Duty Relay. This heavy-duty, 12 volt, 30 amp electronic relay allows the switching and adding of multiple electronic devices within your vehicle. And if you noticed here, we do have a mounting tab for easy installation. Well, that's gonna conclude our real quick look today, I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.
0
0
See what our Experts say about this Blazer Accessories and Parts
- Parts Needed For Adding Charge Line During 4-Way to 7-Way Conversion on a 2016 Ford ExpeditionTo finish the conversion of your 4-Way to 7-Way # C57674 on your 2016 Ford Expedition you will need a Charge Line Kit # RM-156-75. This is needed as Ford did not run the additional wire for the 7-way. You will need to run this directly to your vehicle battery with the included circuit breaker. As this will always provide power to the charge line you may want to add a Relay # BL63VR so it only provides power when the ignition is switched on. This will prevent draining your battery when the...
view full answer... - Troubleshooting Curt TriFlex Trailer Brake Controller Overloading On a 2018 Audi Q7My concern is the Curt TriFlex Trailer Brake Controller # C24VV not getting enough power on your 2018 Audi Q7. There is a technical bulletin which I have linked below since the wiring on your Q7 will not provide enough power to the trailer brakes which is causing the OL error you are getting. You will need the following components from your Audi dealer. 1 connector housing (#1J0-972-782) 2 wire/terminal assemblies (#000-979-228) These will help you to wire in a 30-Amp Relay # BL63VR....
view full answer... - Tekonsha Prodigy P2 Trailer Brake Controller Always Has Power When Truck Is Switched OffIt sounds like your Tekonsha Prodigy P2 Trailer Brake Controller # 90885 is hardwired to the battery so it will always get power on your 2006 Dodge Ram 2500. To resolve this you need to install a Relay # BL63VR so the controller only gets power when the ignition is switched on. If you are connecting the controller using the Wiring Adapter # 3020-P then you may want to consult your local mechanic to determine if there is an issue with the trucks wiring.
view full answer...
- Parts Needed To Install Tekonsha Prodigy P2 On a 2009 Porsche Cayenne With Tow PackageI have linked the Technical Bulletin below for installing a Tekonsha Prodigy P2 # 90885 on your 2009 Porsche Cayenne with the factory tow package. You will need the Plug-In Wiring Adapter # TK22FR along with the Relay # BL63VR to wire the connector as seen in the bulletin by splicing into the red wire on the adapter.
view full answer... - Should the Brake Controller on a 2016 Toyota RAV4 Always Have Power On To Controller? On vehicles like your 2016 Toyota RAV4 it is very common for a brake controller to always have power since they are usually wired directly to the battery and not to a ignition switched source. Generally this is never an issue unless you plan on letting your vehicle sit for long periods of time which you should use a Battery Maintainer # 329-GENIUS5 to protect your battery anyways. If you wanted you could install a Relay # BL63VR in line of the brake controller which you could then tie into...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Daron K
Installed by:
Andy C
Written by:
Bethann B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.