Blazer Off-Road LED Light Bar - 9,200 Lumens - Mixed Beam - Double Row - 22" Long

Video Transcript for Review of Blazer Off Road Lights - Off Road LED Mixed Beam Light Bar - BL98VR

Hi everybody, Andy here with etrailer.com. Let's take a look at this Blazer off-road LED mixed beam light bar. Now this double row LED mixed beam light bar is going to produce bright white light. It's going to be great for off-road driving. The high quality light output comes from two rows of 23 watt LEDs giving you a total wattage of 120 watts with an equivalence of 9,200 lumens that are raw lumens rather and 5,700 effective lumens. Now you can see just how bright this is with my studio lights on.

Let me go ahead and turn those lights off just so you can get a better idea of just how bright this light is. And then I'm going to zoom out and shine this wall shine this light behind me so you can get a look at that beam. Now the fog beam is going to project a beam pattern that is very wide horizontally and narrow vertically lighting up the road beneath the fog. And then the spot beam is going to be great for seeing at a distance and this fog's spotlight beam pattern is effective up to a distance of 2,428 feet. So again, this is gonna be a very bright white light for you.

Let me go ahead and turn my studio lights back on here. I'm gonna go ahead and zoom back in and disconnect the power so I'm not continuing to blind you. And you can get a better look at those LEDs. Turning this back around just so you can see the back here, the channeled fins on the housing here is gonna let heat dissipate quickly to optimize the performance of these LEDs. And this tough polycarbonate lens is IP 67 rated to protect against dust and moisture and it's also going to be impact resistant so it's gonna be a very durable light.

This features a black powder coated aluminum housing and brackets that are rugged and corrosion resistant and this is going to be a very easy installation. This includes these brackets the hardware to install the brackets as you can see, I do have these brackets installed to this light and then the universal mounting feet with the hardware to install the feet at the bottom of these brackets. So this is going to be very sturdy once you have this installed. And while we're here, let me line this up here for you a little bit better and give you some overall dimensions just so you have a good idea of the size. I wanna begin with the length first measuring end of bracket to end of bracket.

So lining that up here the best that I can. We are sitting right at looks like right at about 24 and three quarters inches long end to end. And then looking at the height, including the bracket. So measuring basically from the surface that you're gonna have it mounted to to the top of the light. We're sitting right about four and a quarter inches tall. And then measuring just the light bar itself. So I'm gonna be measuring end to end here where these brackets mount to and the hardware installs. So measuring end to end, we're sitting pretty close to 22 inches long on just that light bar. And then the height of just the light bar. Looks like we're pretty close to right at three inches tall just on that light bar. And then the overall depth of the light bar itself. Let me see if I can line this up so you can see. We're sitting right at about three and a quarter inches deep. Now this will hardwire into your 12 to 24 volt system and it has 8.4 amperage draw. Instructions are also included with this light and that's going to wrap up our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.