THIS ITEM IS NOT A FIT FOR
2019 Nissan Frontier
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 75085
Retail:$361.95
Our Price: $222.52
You Save: $139.43
2019 Nissan Frontier
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (73)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 75085
- 2 Inch Hitch
- Class III
- 3500 lbs GTW
- Concealed Cross Tube
- Draw-Tite
- 350 lbs TW
- 6000 lbs WD GTW
- 600 lbs WD TW
- Custom Fit Hitch
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum GTW when used with weight distribution: 6,000 lbs
- Maximum tongue weight: 350 lbs
- Maximum TW when used with weight distribution: 750 lbs
- Maximum gross trailer weight: 3,500 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
75085 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame
87464 Hidden Hitch Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 1998 - 2000 Isuzu Hombre with Step Bumper
- 1996 - 2004 Chevrolet S-10 Pickup Sportside with Non-Towing Bumper
- 1998 - 2004 Chevrolet S-10 Pickup with Factory Step Bumper
- 1998 - 2003 Chevrolet S-10 Pickup ZR2 models
- 1996 - 2004 GMC Sonoma Sportside with Non-Towing Bumper
- 1998 - 2004 GMC Sonoma with Factory Step Bumper
- 1998 - 2003 GMC Sonoma ZR2 models
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75085
Average Customer Rating: 4.8 out of 5 stars (73 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.by: Steve V03/09/2024
Everything was perfect, start to finish !!
by: David 12/09/2023
Fit perfect
by: Rob J07/19/2015
2003 Chevrolet S-10 Pickup
Installation was a bit more than I originally anticipated, but over all not bad. The finish could be better, but it's a hitch receiver, it doesn't have to look nice, just be tough and do the job which is exactly what it does. I have the same hitch on a nother truck which is why I bought it for this one. Awesome customer service and VERY fast shipping. Awesome product and company
by: omar05/27/2017
2000 GMC Sonoma
Easy to install, I take 45 min without the help of an assistant,Very happy with the product, fast shipment and good assistance with the information
by: Tom02/22/2017
Hitch was delivered on time. Installation was straightforward and hitch perfromas as advertised. I will order from etrailer.com again!
Tom
2/22/2018
Still working as advertised with no issues.
by: Walter02/01/2018
1996 GMC Sonoma
Installed on a 1996 GMC Sonoma 2 WD extended cab. Purchased the light set as well. It was drop shipped to my In-Laws house very quickly. The instructions were fairly straight forward and everything fit and went together fine. This truck has a factory heavy duty suspension and tires, but the receiver tongue will still drag a bit on steep grades. The new light kits are a snap, wonderful piece of equipment. I hooked up a rental trailer and towed it from Kansas City to Orlando, no issues at all. I have purchased more than one hitch from etrailer and will do it again.
by: Richard M11/20/2016
ONLY THE SECOND HITCH IN 16 YEARS. FIRST ONE RUSTED OUT. THIS LOOKS GOOD , IS MUCH SAFER, &WORKS GREAT
Richard M.
11/20/2017
works great. I installed it myself along with a new bumper. No problems so far. 2000 s10 short bed
by: M C M I10/18/2022
It took a little extra work on 2003 S10 because there are some brackets that need to come off in order for this to fit.
But is really string and nice looking.
by: Craig01/21/2017
2002 Chevrolet S-10 Pickup
Purchased this hitch for a recently acquired 2002 S10.
It arrive within 3 days of order, using free shipping.
I was concerned at first because I saw no hardware, BUT, it and instructions were all attached to the hitch receiver so they couldn't be lost.
Install took me two hours. I had reviewed the you tube video for my truck.
The video made it easy.
I didn't have to remove the bumper cover or drop the spare with my " no hitch" bumper.
Older S10 are known for grounding issues. Take time to clean the frame and ground connectors while you have them removed for the install.
by: Gina07/24/2019
Lincoln LS
The install diagram was not clear for the type of truck I have. I have side step bumpers on an LS extended cab S10. I went [online] and found an install similar to mine and was able to see the hitch has to go on the outside of the frame. That is the reason for the 4 star rating.
I have used it a couple of times and seems to work great! It's nice to have a hitch to haul small loads or lawn mower around. A country girl has to have her truck well equipped.
by: A Knesal05/17/2017
Expected delivery in a few weeks, but it arrived in just a few days(5).
Packaging was heavily damaged and one mounting arm was banged hard enough to require some persuasion to get back into position(mounting width and squared), plus small area repainted.
The good news was, the signal/brake/running light assembly was well protected by double cardboard as there was a big puncture in the package right near the lighting harness adapter/wiring unit position and that extra protection probably would have saved it from damage had that puncture been where the unit was.
Haven't installed yet, so can't comment on installation. Will update later.
Overall, very satisfied, and will be doing more business with etrailer in the very near future.
And thanks etrailer for the quick service and great value.
by: Rich 10/19/2019
I ordered a Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" for my 1998 S-10 4X4. Took less than a week to get it delivered, great service from etrailer. My salesman was Steve, very courteous and helpful. And he did a follow-up when it was delivered which I appreciated, thanks Steve. The product is tough and installed like a glove.
by: Robert 08/11/2021
This item along with the light wiring harness fit exactly as the unit and pick up were designed. The video installation was worth watching several times before assembly.
Very well made and worth the expense.
by: James04/09/2018
1999 GMC Sonoma
Good, heavy hitch.: All parts were there. No pictures. We installed outside. The box came in handy to lay on.
James
4/9/2019
I have used that hitch so many times I cant count.. Hauled lumber, and tin for storm fix-up and, moved to a new place to live. A small truck, with a 5×8 trailer. So far so good!.
by: Gary11/05/2014
The videos made installation a breeze. My experience with customer service was great. I was notified by Jan that the hitch that I ordered was out of stock, and she came up with an alternative hitch and shipped my order right away. The hitch came super fast and the packaging was the best, no damage at all. I will look to etrailer for all my trailer needs.
by: Gary07/29/2018
1998 Chevrolet S-10 Pickup
Good fit. Was here day they said would be. All hardware included. Price was less than I could get local.
Gary J.
7/30/2019
Used weekly to launch boat in salt water no problem s
by: David05/03/2021
Everything worked great! The wiring harness and hitch were a gift to my son for his 2000 S-10, and he reported that the installation went perfectly...
by: Thomas05/07/2016
Put this hitch on 2002 S-10 with step bumper. Tight fit going on. Had elongate one hole in bumper brackets to get bolts in. Make sure you remove the plastic pad on the bumper first, as you need to get to the bolts that hold the bumper to the brackets.
Otherwise it is a nice sturdy hitch.
by: DozerDougNJ03/28/2015
2003 Chevrolet S-10 Pickup
Prompt shipping on the hitch receiver and accessories. Installation was fast and went smooth. I watched the video to preview the job. It was completed the same day we received the package. Thank you.
by: vince p05/21/2013
I received the hitch this afternoon Was able to install the hitch and wiring in about a hour.Good fit I price out if I bought from at a dealer and it was twice what I had spend with then doing the complete job. Some how I had ordered the wrong hitch the frist time called customer service and the resloved problem and send me the correct one. I would buy from them again,,,,Thanks Vince
by: Larry04/23/2019
Etrailer.com is my GOTO place for any hitches and wiring harnesses. They never let me down. SO far, every hitch went on without a hitch. ;-) Very fast delivery also btw.
by: Wayne07/08/2017
1999 Chevrolet S-10 Pickup
Easy install and no problems after one year of frequent use pulling small trailers with mowers, canoes, landscape mulch, and other light loads like that.
by: Joe B03/23/2015
Product is very good. Looks very professional. Installation is easy and instructions are provided.
Shipped on time -- only issue was the box didn't survive the trip There was no damage to the hitch, It traveled well.
by: David06/03/2019
I got exactly what I ordered. The receiver hitch fit perfectly, and I am very pleased. It took me about 45 minutes to do the whole job. But I have 40 years experience as diesel mechanic also. I would highly recommend a cordless impact wrench, because there are a lot of nuts and bolts.
25
73
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Help Picking Out Trailer Hitch for 1997 Chevy S-10 with Sportside and Roll Pan BumperSounds like you have the Sportside with a non towing bumper which would mean you would want the part # 75085. If instead you had the factory roll pan bumper you would want the pat # 13920. I attached a picture of what the sportside with non-towing bumper looks like. If that matches your truck you would want the # 75085.
view full answer...
- Recommended Trailer Hitch Receiver for 2002 Chevy S-10 TruckThe Hidden Hitch you asked about is no longer available but there is a great option that is a very similar hitch, the Draw-Tite Trailer Hitch Receiver # 75085 which fits a 2002 Chevy S-10 with a Factory Step Bumper, a Sportside with a Non-Towing Bumper, and ZR2 models. This is a Class III hitch with a 2" receiver and does not require any drilling into your frame to install. I have added a link to the installation instructions for you to check out.
view full answer... - Hitch with Greater than 3500 lb Capacity for 2001 Chevy S-10 None of the hitches we offer for your S-10 have a towing capacity greater than 3500 lbs. When used with a weight distribution system, the Draw-Tite Class III receiver you were looking at, part # 75085 has a towing capacity of 6000 lbs and a 750 lb tongue weight capacity. A weight distribution system uses spring bars to transmit a portion of the trailer tongue weight from the rear tow vehicle axle to the front axle, which uses the whole vehicle to support the load and helps to decrease...
view full answer... - Recommended Trailer Hitch Receiver For 1998 Chevy S10 Sportside With Roll Pan BumperWe have a hitch that will fit your 1998 Chevy S-10 Sportside with Roll pan bumper. It is the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75085. If you will be towing with this receiver, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118359. This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located at the rear, along the inside of the driver's side frame rail. I've attached an installation...
view full answer... - Trailer Hitch Receiver to Fit 2004 GMC Sonoma Crew Cab SLSThe Draw-Tite Max Frame # 75085 is confirmed to fit your 2004 GMC Sonoma Crew Cab as long as you have either the factory step bumper or non-towing bumper. If your truck has the factory roll pan bumper then the Curt # 13920 is the correct hitch. If you're going to be towing with your truck you may also need wiring for your trailer's lights. The Curt Wiring Harness # C55359 will provide a 4-way trailer connector. This installs by plugging into your truck's wiring behind the rear bumper,...
view full answer... - Will A Trailer Hitch From A 2002 Chev S-10 Fit A 2003 GMC Sonoma?Your 2003 GMC Sonoma and a 2002 Chevrolet S-10 do indeed use the same trailer hitch receivers due to them having the same trailer hitch mounting locations, but you will need to make sure the hitch matches the options of your truck. What I mean is there is trailer hitches that only fit if you have the factory step bumper like the Curt Trailer Hitch # C13132, where others like the Draw-Tite # 75085 fit the trucks with a factory step bumper, Sportside with non-towing bumper, and the ZR2 models. If...
view full answer... - Trailer Hitch Fit Recommendation for 2000 Chevy S-10 with Sportside and Non-Towing BumperLooks like you have a 2000 Chevy S-10 with a Sportside and a non-towing bumper. For that the Draw Tite hitch part # 75085 is a confirmed fit and would work well.
view full answer... - Trailer Hitch Recommendation for 2003 Chevy S-10 with StepsideThe Draw Tite hitch part # 75085 is a fit for your 2003 Chevy S-10 with the sportside non-towing bumper that you have. It would be a great option. For trailer wiring you then would want the part # 118359. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a...
view full answer... - Trailer Hitch Recommendation for a 1998 GMC SonomaFor your 1998 GMC Sonoma, I have included a link to the available trailer hitches. For a Draw-Tite hitch, go with # 75085. This is a Class III trailer hitch rated for 350 pounds tongue weight capacity and 3,500 pounds gross trailer weight. It can also be used with weight distribution for 600 pounds tongue weight capacity and 6,000 pounds gross trailer weight capacity. I have included a link to the installation instructions for you. If you plan on doing some towing, I recommend the etrailer...
view full answer... - Trailer Hitch Recommendation for a 1998 Chevy S-10 with Stepside and Roll PanThe Draw-Tite Hitch # 75085 that you referenced would be exactly what you would need. This hitch is designed to work on 1998 Chevy S-10s with stepside and a roll pan bumper so it should work well for you. The install will require the temporary removal of the roll pan, but it will not require any modification to the bumper or any drilling otherwise. I attached installation instructions for you to check out also.
view full answer...
- Which Hitch for a 2004 Chevy S-10 and What is Involved in InstallingIf your Chevy S-10 has a step bumper then I would go with hitch # 75085. This has a 2 inch square receiver opening which allows you to use the most accessories (bike racks, cargo carriers, etc.). There is a link to the installation instructions so you can see what is involved in the installation.
view full answer... - Will Hitch 75085 fit a 2004 Chevrolet S-10 Pickup with a Standard BoxHitch # 75085 would work well on your 2004 Chevrolet S-10 with a standard box. This hitch fits the S-10 models with the step bumper and standard box. I included a link to the installation instructions so you can get a better idea of how the installation will go on your vehicle.
view full answer... - Recommended Hitch for a 2003 GMC Sonoma w/ a Roll Pan Since your 2003 GMC Sonoma has the roll pan, the correct hitch for your truck is the Draw-Tite Trailer Hitch item # 75085. This hitch is custom fit and bolts to your Sonoma with included hardware. If you are planning on towing you will also need a wiring harness item # C55359 and a ball mount kit item # C45534. I also recommend using the No-Drill Mount Bracket item # 18136 and the item # C42CR to secure the 4-way connector to your hitch. This will put it in an easy to reach spot and...
view full answer... - Class III Receiver for 1999 Chevy S-10 Extreme SportsideI spoke with my contact at Draw-Tite, who tells me that the Class III # 75085 receiver will fit the 1999 S-10 Sportside with the non-towing bumper. He did not have any information regarding fit on the Extreme model, which means that some trimming of the fascia under the bumper might need to be done in order for the hitch to fit. Take a look at the diagram I captured from the install instructions. If you measure 8 inches downward from the frame hole shown, it will give you a pretty accurate...
view full answer...
- Will the Draw-Tite Class III Trailer Hitch # 75085 fit a 2002 GMC Sonoma Low RiderThe Draw-Tite Class III 2 Inch Hitch, part # 75085, will fit the 2002 GMC Sonoma Sportside with Non-Towing Bumper, the Sonoma with the Step Bumper, and the Sonoma ZR2 models. The recommended ball mount for this hitch is the Convert-A-Ball 3/4 Inch Rise or 2 Inch Drop Ball Mount, part # AMSC2. This is for a GMC Sonoma at the stock factory height. Trailer hitches are designed to handle a certain weight carrying capacity on the vehicle, based on the vehicle having a factory suspension. If...
view full answer... - Recommendation on a Trailer Hitch that will Fit a 1997 Chevrolet S-10 w/ Sportside Non-Towing BumperFrom the picture of your 1997 S-10 that you sent me, we determined that you have the sportside with non-towing bumper model S-10. The Draw-Tite Max Frame Hitch, # 75085, is the confirmed hitch that will fit the S-10 with the sportside bed. The Draw-Tite hitch is a Class III rated hitch with a tongue weight capacity of 350 lbs and a towing capacity of 3,500. If you are planning to tow a trailer with your S-10, I recommend the T-One Wiring Harness, # HM41115. The T-One harness will allow...
view full answer...
- Trailer Hitch for a 1996 Chevy S-10 with Roll Pan BumperWe do have a trailer hitch for your 1996 Chevy S-10 with the roll pan bumper. it is Curt hitch # 13920. I have included a link to the installation instructions for you. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit...
view full answer... - Trailer Hitch Fit for 1998 Chevy S-10 TruckThe correct hitch will depend on which bumper your S-10 is equipped with. For a factory step bumper, I'd recommend the Curt # C13132. For a roll pan bumper, you'll want to use # 13920, but you'll need to cut a hole in the license plate well and find an old-school hinged license plate holder online or from a salvage yard. If you have a short bed truck, the # 13920 hitch will prevent the spare tire from being stowed under the vehicle.
view full answer... - Concealed vs. Visible Crosstube for 1999 Chevy S-10 With Factory Step BumperOn a trailer hitch receiver, concealed means the crosstube does not show at the rear of the truck, just the receiver does; while exposed means the crosstube and the receiver show. A lot of people really like the concealed crosstube because it keeps the look of their truck intact, but that's the only difference. For your 1999 Chevy S-10 with a factory step bumper you can choose from a hitch with either a concealed or visible crosstube, but if it were me, I'd go with the concealed option: -...
view full answer... - How to Determine Which Trailer Hitch Receiver Will Fit 2003 Chevrolet S-10 with Aftermarket BumperTo determine if a trailer hitch receiver will fit on your 2003 Chevrolet S-10 that has an aftermarket bumper you'll have to do a little measuring. There are three Curt Class III trailer hitch receivers that may work for you. You'll need to measure from the mounting holes on your truck's frame to the underside of the bumper to see if there is enough clearance. The measurements of each hitch that you will at least need are: # 13920 - 2.353 inches # C13132- 8.32 inches # C13021- 10.20...
view full answer... - Does a Trailer Hitch Receiver From a 2002 Jeep Grand Cherokee Fit a 1997 Chevy S-10We carry hitches to fit your 1997 Chevrolet S-10 but a hitch from a Grand Cherokee isn't the same design. The distance between the frame and the way the hitch attaches to the frame are significantly different. Trailer hitches are custom made for specific vehicles and it's rare that a hitch for one fits another unless they have the same frame. For example, Draw-Tite # 75085 if for the S-10 as well as the GMC Sonoma, the GMC S-15, and the Isuzu Hombre. I've attached a link to all of the...
view full answer... - Which Trailer Hitch Fits 2003 Chevrolet S10 SportsideSince you have a 2003 Chevy S10 Sportside the correct hitch you need is the # 75085. A roll pan bumper is totally smooth and basically doesn't stick out past the tailgate surface at all. A non towing bumper would still stick out further from the tailgate.
view full answer... - Recommended Trailer Hitch For 1997 GMC Sonoma With Rear Roll Pan BumperWe do have a trailer htich that will work with your 1997 Sonoma with the rear pan bumper. I recommend the Curt trailer Hitch, part # 13920. This is a Class lll hitch and it has a 2-inch receiver opening. One tech note states the roll pan will need to be cut in the license plate area for receiver access. The trailer hitch you came from, part # 75085, is not designed to be able to work with your roll pan bumper. If you plan on doing some towing you might be interested in etrailer ball mount...
view full answer... - Installation of Draw-Tite Hitch Receiver on 2003 Chevy S-10To install the Draw-Tite # 75085 on your 2003 Chevy S-10, you'd need to temporarily remove the bumper/fascia, and then bolt the hitch between the frame and bumper brackets. You will then reattach your bumper/fascia and the receiver will be under the license plate. If you are going to be towing you'll need a 4-way connector, the Curt # C55359; and I also recommend checking out Ball Mount Kit # 989900, which will fulfill your towing needs in one tidy package; a pair of ball mounts to give...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Lindsey S
Video by:
Joshua S
Video Edited:
Jacob T
Updated by:
Laura H
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Isabelle B
Test Fit:
Joe B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Rob J.
7/18/2016
Just as it should