Buyers Products Pintle/Combination Hitch Mounting Kit

See what our Experts say about this Buyers Products Accessories and Parts

• Mounting Hardware Needed for 20K Curt SecureLatch Pintle Hook with 2-5/16" Ball
  The 20K Curt SecureLatch Pintle Hook with 2-5/16" Ball # CU97FR will need to be installed with 1/2" Grade 8 bolts. We actually have the Hitch Mounting Kit # 3378520 from Buyers Products that has everything in it you need to get the Curt SecureLatch installed.
  view full answer...
• Can Buyers Products 3 Position Pintle Hook Mount be Used in Rise Position
  Yep, you can absolutely use the Buyers Products 3 Position Pintle Hook Mount for 2-1/2" Receiver # 337PM25812 in the rise position instead of the drop position. This is a 20k mount that will go perfectly with a pintle hook like the Curt Pintle Hook # C48210 with Mounting Kit # 3378520.
  view full answer...
• Dimensions of Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper with Pintle Mount 3371809050
  I was able to get the dimensions you were looking for of the Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper with Pintle Mount # 3371809050. Overall it measures 62 inches wide x 13 inches tall x 22 inches deep; also from the top of the mounting brackets to the first set of mounting holes for a pintle hook, the distance is 4 inches. Then for a pintle hook you can choose from any of the following, which I confirmed with Buyers Products are a direct fit for the mounting plate of...
  view full answer...
  
• Does Pintle Mounting Plate and Pintle Hook Need to be Removed After Use
  I believe I know what you are asking and you should unhook your trailer instead of removing the entire unit from your hitch still hooked up to the trailer as it would be extremely difficult to get it back in your hitch. The Buyers Products 2" Pintle Hook Mount # 337PM90 would work great with the Buyers Products 15 Ton Pintle Hook # 337PH15, which you would need to install using Buyers Products Pintle/Combination Hitch Mounting Kit # 3378520. Just make sure you use it properly, unhooking...
  view full answer...
• Distance From Center of Hitch Pin to Gusset on Buyers Products Pintle Hook Mount 337PM812
  Hey Marc, I contacted Buyers Products was able to get that measurement for you, and the distance is 2-3/4 inches from the center of the hitch pin to the gusset on the Buyers Products 2" Pintle Hook Mount # 337PM812. For a compatible pintle hook and hardware use Pintle Hook # 337PH6 and # 3378520.
  view full answer...
• Mounting Plate Compatible With Buyers Products 8 Ton Combination Pintle Hitch
  I checked with the manufacturer, and the Buyers Products 8 Ton Combination Pintle Hitch with 50 Millimeter Ball # 337BH850MM has mounting holes which are 3-3/8" center to center horizontally and 1-3/4" center to center vertically, which do not match up with the Curt mounting plate you asked about, because it has slightly wider horizontal mounting holes. What that means is you will need the similar Buyers Products 2" Pintle Hook Mount - 3 Position - 10" shank # 337PM107 which has mounting...
  view full answer...
• Can Buyers Products Pintle Hitch Mount to Pro Series Adjustable Pintle Hook Mounting Plate
  The Buyers Products 8 Ton Combination Pintle Hitch with 50 Millimeter Ball # 337BH850MM can be used with the Pro Series Adjustable Pintle Hook Mounting Plate 63072 but to mount the hitch you'll need to source your own 1/2"-13 threaded bolts to mount the pintle hitch. This mounting plate is different than most because it uses those bolts as opposed to the screws, nuts and washers that come with Mounting Kit # 3378520. For your 2" trailer hitch, instead of the Pro Series plate, I recommend...
  view full answer...
• Replacement Mounting Hardware for Buyers Products 15 Ton Pintle Hook
  The Buyers Products 15 Ton Pintle Hook with Mounting Kit # 33710040 actually comes with the mounting hardware needed to get it installed but if you're needing to replace it you can find it with the Pintle/Combination Hitch Mounting Kit # 3378520.
  view full answer...
• Mounting Hole Dimensions of Buyers Products 10 Ton Pintle Hook
  While there isn't a 3D model available, I was able to verify with the manufacturer and get a small diagram of the mounting hole dimensions of the Buyers Products 10 Ton Pintle Hook # 337PH10. The mounting holes are exactly 0.531" in diameter, and are spaced apart 1.750" (1-3/4") vertically and 3.375" (3-3/8") horizontally. I also verified the correct mounting hardware for the # 337PH10 is the Buyers Products Pintle/Combination Hitch Mounting Kit # 3378520.
  view full answer...
  
• Availability of Pintle Hook for 2 Inch Thick Lunette Ring
  I called a few of our pintle hook manufacturers as well as went out to our warehouse to measure some for you. Unfortunately, none of them will accept a 2" thick lunette ring. The majority of them are designed for a 1-3/4" thick ring like the Buyers Products 15 Ton Pintle Hook part # 337PH15. It looks like from the photo you attached you are right at the 1-3/4" measurement so the Buyers Products 15 Ton Pintle Hook may still work for you. If not your best option would be to replace it with...
  view full answer...
  
• Hardware to Use to Mount Buyers Products 15 Ton Combination Pintle Hitch BP38FR
  We actually have a mounting kit for the Pintle kit part # BP38FR with the part # 3378520 which comes with 1/2 inch diameter 2 inch long bolts.
  view full answer...
• Can the Buyers Products 2 Inch Pintle Hook Mount Be Flipped
  The Buyers Products 2" Pintle Hook Mount part # 337PM90 can be inverted to provide a greater rise or installed in the normal position to provide a greater drop. If you don't already have a pintle hook and hardware you can use the Buyers Products 15 Ton Pintle Hook part # 337PH15 with the Buyers Products Pintle/Combination Hitch Mounting Kit part # 3378520.
  view full answer...
• Is Buyers Products Pintle Hook # 337PH10 Compatible with B&W # BWPMHD14004
  The Buyers Products 10 Ton Pintle Hook # 337PH10 referenced in your question is indeed compatible with the B&W Pintle Hook Mounting Plate # BWPMHD14004 that you also mentioned. I went out to our warehouse to measure the bolt hole spacing on the pintle hook to verify this. Both items feature a 16,000 pound towing capacity. For mounting hardware, I actually recommend the Buyers Products Mounting Kit # 3378520, as it was specifically designed for this model Pintle Hook. If you want to use...
  view full answer...

Do you have a question about this Accessories and Part?