Master Lock Covered Solid Body Padlocks - 1/4" Shackle Diameter (2 Pack)

See what our Experts say about this Master Lock Padlocks

• Lock Solution for Bulldog BX1 Gooseneck Coupler
  The BX1 series of gooseneck couplers can be locked with a padlock like the part # 141T. When the BX1 couplers are in the coupled position, you can place a padlock through the hole as indicated in the picture. The coupler could then not be opened with or without a trailer connected.
  view full answer...
  
• Cargo Basket Recommendation For 2014 Hyundai Santa Fe Limited With Panoramic Roof
  There are a couple of measurements you can take on your 2014 Hyundai Santa Fe. First, you will want to measure the crossbars themselves to make sure any basket you select will fit the style and size you have. The next important measurement is the distance center-to-center. You said your crossbars measured 43 inches, so that will be the measurement I use when making a recommendation. Unfortunately, the Rhino Rack Cargo Carrier, part # RMCB, you referenced, will fit on roofs that have...
  view full answer...
• Availability of a Waterproof Case to Store Equipment on a Hitch Mounted Cargo Carrier
  The waterproof cargo bag I recommend for your cargo carrier is the 20 cubic feet cargo bag # 988501. It will include 6 tie-down straps to secure it to your cargo carrier, but I recommend a lock such as the Master Lock padlock # 141T to lock the cargo bag by the zippers. Simply insert the lock through both holes on the zipper to secure. I went to our warehouse to get the cargo bag and locks to ensure they fit too. See picture I included. The center underside of the Tow Ready cargo carrier...
  view full answer...
  
• Does Carpod Walled Cargo Carrier Fit 2022 Tesla Model Y
  Yes, so long as your 2022 Tesla Model Y has a 2 inch trailer hitch receiver, you can absolutely use the Carpod cargo carrier you asked about, which is the following part number: - 23x47 Carpod Walled Cargo Carrier w/ Lid - 2" Hitches # M2205-2201 If you need a hitch the correct fit for your '22 Model Y (all models, including the Long Range) is the EcoHitch Invisi Trailer Hitch Receiver # EH39FR. When we installed this hitch on a Model Y we found it was about 5" from the hitch pin hole...
  view full answer...
• Is The Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter Compatible With A B&W Gooseneck
  As long as the B&W gooseneck hitch is compatible with a 2-5/16" hitch ball, then yes, the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter part # CAB-C5G will work for you. To secure this adapter, I recommend using the Master Lock Covered Solid Body Padlocks part # 141T. If you do not already have a 2-5/16" hitch ball on your B&W gooseneck trailer, I recommend using the Replacement Hitch Ball for B&W Turnoverball Underbed Gooseneck Hitch part # BWGNXA2006.
  view full answer...
• Cargo Rack for 2019 Ram 1500 with Retrax XR Tonneau for Kayak and Cargo Carriers
  The Two Retrax XR manual tonneau covers that fit your 2019 Ram 1500 6-1/2-foot bed without Rambox are parts # RTT-80245 for the aluminum version and # RTT-60245 for the Lexan version. Both can use the Yakima JetStream Crossbar System # Y00427-482104 which features aluminum crossbars that install right in the Trax rail system you have. The 70-inch bars will give you plenty of space for both a cargo box and a kayak carrier and their quiet aerodynamic design includes built-in T-slot channels...
  view full answer...
  
• Is There Accessory Bars for the Yakima LockNLoad Platform Rack?
  I have an answer for you. Unfortunately, Yakima does not offer accessory bars for the LockNLoad Platform # Y05047 and the platform will not be able to accommodate a RocketBox Pro like the # Y07192 . With that being said a great alternative is to use a cargo bag like the Curt Cargo Bag - Water Proof - 21 cu ft # C18221. The Curt bag is a great option because it will give you 21 cubic feet of space compared to our largest RocketBox (14 cubic feet). For extra security, you can add the Master...
  view full answer...
• Locks Available for the Carpod Walled Cargo Carrier # M2200-01-02 on a 1999 GMC Safari
  The Carpod Walled Cargo Carrier with Lockable Lid and Cargo Bag # M2200-01-02 will work with the Master Lock Covered Solid Body Padlock # 141T. If you are looking for a hitch lock, I would recommend the Trailer Hitch Receiver Lock # e98880. I have included a video of the hitch lock for you to check out. Both locks are sold separately from the cargo carrier. You will need a 2 inch receiver to carry this cargo carrier on your 1999 GMC Safari. If you do not have a receiver, I recommend the...
  view full answer...
• What are the Two Smaller Holes for on the Roadmaster Base Plate Kit # 1528-3
  The smaller holes on the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # 1528-3 are there to padlock the arms to prevent theft. If you need a padlock, I recommend the Master Lock Covered Solid Body Padlocks - 1/4" Shackle Diameter (2 Pack) # 141T. I recommend this lock set because it has the vinyl covering that will protect it under your vehicle.
  view full answer...
• Swagman Bike Rack for an RV Towing Setup
  Bike racks like the Swagman XC, part # S64650 that are not rated for RV use are generally can't handle the increased sway and rock that an RV experiences. This is largely caused by the distance between the rear axle and the trailer hitch. RV Rated racks tend to be built with sturdier designs and heavier materials to be able to withstand this sway. Many of them will not have tilt or fold away features on them to help withstand this motion. I recommend avoiding the use of the dual-hitch...
  view full answer...
• Recommended 2-Bike Rack for Use While Towing with a 2014 Chevrolet Traverse
  Aside from using some roof mount bike racks on your 2014 Chevrolet Traverse the most popular bike rack that we have for a towing application is the Swagman Traveler XCS # S64664. This is a platform mount bike rack that installs on a ball mount for a 2" trailer hitch. The platform style with ratcheting arms for securing the bikes allows you to carry a wide variety of bike frame styles that don't have a drastic step-through frame. It has a 70 lb weight capacity (35 lbs per bike) which will...
  view full answer...
• Is Car Top Cago Rooftop Cargo Box Water Resistant
  The Car Top Cargo Rooftop Cargo Box # CTC-18S will offer some protection from the elements however it is not sealed tight or water proof. No cargo box is completely water proof. If you're storing anything in it that absolutely cannot get wet, such as electronics of any kind, I would keep them in plastic bags before storing in the box. If you're interesting in locking the box, the Master Lock Covered Solid Body Padlocks # 141T pair well with the cargo box.
  view full answer...
• Should Two Pairs of the Ultra-Fab Chock and Wheel Stabilizer be Used on Triple Axle Trailer?
  I do recommend using two pairs of the Ultra-Fab Chock and Lock Wheel Stabilizers # UF21-001070 for your triple axle trailer. Doing so is going to give you the best amount of stability to limit the front-to-back rocking motion that will occur when you are parked. These stabilizers are designed to work with wheels that are 1-1/2" to 5-1/4" apart; I've added a link to video reviews of this product for you to take a look at as well.
  view full answer...
  
• Recommended Padlocks for Locking Bikes on Swagman Nomad Bike Rack
  I recommend using the Master Lock Covered Solid Body Padlocks # 141T to lock the ratcheting arms on the Swagman Nomad Bike Rack for 2 Bikes # S36FR. These padlocks have a 1/4" diameter shackle and they use the same key since they come in a pair.
  view full answer...
• Recommendation for a Weather Resistant Cable Lock to Secure Entry Ports on a Trailer
  The Master Lock Armored Cable Gun Lock, # 107KADSPT, is designed as a gun lock and is not intended for all-weather conditions. Water and salt could cause corrosion of the steel components. Instead, I recommend separate locks and cable that are coated and/or made of corrosion resistant materials. Take a look at Master Lock Covered Solid Body Padlocks, # 141T. These locks are constructed of corrosion resistant materials so would work well outdoors. I would use these locks with Master Lock...
  view full answer...
• How to Lock Thule Adventurer Cargo Box With Missing Lock Barrels
  Although you have the lock core, you are missing the lock cylinder or barrel assembly it would install into. Unfortunately, Thule doesn't offer this as a replacement part. To be honest, your best bet would be to get a couple of lock hasps like # ML702D and padlocks like # 141T.
  view full answer...
• Will The Du-Ha Wheeled Storage and Gun Case Bracket Work with Spray-In Truck Bedliner?
  The Du-Ha Tote Wheeled Storage Container and Gun Case # DU70103 and mounting bracket # DU70104 will work fine with a spray-in bed liner. It won't have any impact at all on the function of this unit and installation will be exactly the same. I recommend using locks like # 141T for this application.
  view full answer...
• How Does the Du-Ha Tote Wheeled Storage Container # DU70103 Lock
  The Du-Ha Tote Wheeled Storage Container # DU70103 that you referenced has 3 steel latches on the front that secure the lid when it is closed. If you would like to lock them then you would need padlocks. Although there are 3 latches, I recommend going with the Master Lock Covered Solid Body Padlocks # 141T which comes in a pack of 2.
  view full answer...
  
• Operation of Wheeled Storage and Gun Case With Bracket Attachment
  The Du-Ha Tote Wheeled Storage Container and Gun Case # DU70103 when used with the mounting bracket # DU70104 will allow you to lock the carrier to the frame and easily slide the container in the track. The bracket supports the box even when only partially pulled out so you can access cargo in your vehicle without completely removing the box. I've attached some photos to assist. I also recommend locks like # 141T.
  view full answer...
  
• Can Duha Wheeled Storage Container and Gun Case DU70103 Fit Rifles with Scopes
  Yes, the Duha Wheeled Storage Container and Gun Case # DU70103 will hold as many as 4 rifles with scopes installed, or 4 shotguns. The case's 15-inch depth lets it work with virtually any style of long gun and it meets most states' legal requirements for transporting guns. And it even includes cup holders molded into the top for your morning coffee when ducking hunting or your cold beer back at the campsite while you're cooking the day's bounty. There is even a matching Mounting Bracket...
  view full answer...
• Type of Solvent to Apply to Corroded Padlock That Will Not Open
  If a lock has corrosion and will not allow you to turn the inserted key you can try applying a spray solvent like WD40 or PB Blaster inside the key opening. This may be able to dissolve enough of the corrosion to allow the key to turn and open the lock. At that point you can apply more of the solvent to finish removing the corrosive build-up inside it. These solvents can take time to work and they will sometimes need multiple applications before they have finished working on the corrosion....
  view full answer...
• Do the Ultra-Fab Trailer Wheel Chocks Put A Lot of Tension on the Tires
  The Ultra-Fab wheel chocks, # UF21-001070, kind of work like vise grips. There is a nut on the top that you loosen or tighten and this controls how much the chocks push out against the tires. The lever pushes out the sides of the chock to the limit set by the nut, like squeezing the handle on vise grips. To get more tension you would adjust the nut until you get the desired tension. I have included a link to a video showing how the chocks work. You can also add a pad lock like # 141T to...
  view full answer...
• Locks Compatible with the Demco 5th Wheel Rail Adapter to Factory Ford Pucks
  The Demco 5th Wheel Rail Adapter for Ford OEM 5th Wheel Towing Prep Package - 25,000 lbs # DM6175 does have the pin quick release that are 0.313 x 1.00 inch. Demco doesn't make a specific part for this to lock it but you can use a padlock with compatible diameter shackle for that application. The Master Lock Covered Solid Body Padlocks - 1/4" Shackle Diameter (2 Pack) # 141T should work well for your application.
  view full answer...
  
• How to Determine Correct Wheel Stabilizers for Tandem Axle Trailer
  In order to determine the correct wheel stabilizer for your tandem axle trailer, you need to know the spacing you have between your wheels, as there isn't a standard spacing for trailers based on size. So all you need to do is take a quick measurement of the space between the tires at their closest point, which you'll use to determine the right stabilizers. - Up to 5-1/4" Wheel Spacing: Ultra-Fab Chock and Lock Wheel Stabilizers # UF21-001070 (can be locked with Master Lock Padlocks #...
  view full answer...

Do you have a question about this Padlock?