Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness - 2 Modes - 1 to 3 Axles - Proportional
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Jeep
Part Numbers: RED63RR,3073-P
Our Price: $297.64
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness - 2 Modes - 1 to 3 Axles - Proportional
part number: RED63RR
Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight with the included wiring harness. The Elite's user-controlled mode lets you respond to any weather or terrain.
Features:
- Brake controller activates trailer brakes in proportion to your vehicle's braking
- Automatically adjusts trailer's braking based on deceleration of tow vehicle
- User-controlled mode gives you direct control of your braking
- Great for off-roading or towing in adverse weather
- Activates trailer brakes independent of tow vehicle's brakes
- Dash-mounted knob keeps your vehicle interior looking sleek while giving you easy access to the brake controller
- Lets you adjust braking power with the turn of a dial
- Gives you a manual override at your fingertips
- Offers simple diagnostics with colored LED alerts
- Main unit mounts out of sight behind the dash in any position, direction, and angle
- No more banging your knee on a bulky controller
- No interference with airbags or other vehicle accessories
- Included plug-and-play adapter connects the main unit to a vehicle-specific Tekonsha wiring harness (sold separately) for reduced installation time
- Meets or exceeds both UNECE R21 and FMVSS 201 regulations for sustainability and safety
- Made in Australia
Specs:
- Application: trailers with up to 3 axles (6 brake assemblies)
- Compatible with electric or electric-over-hydraulic trailer brakes
- Works with 12-volt and 24-volt vehicle electrical systems
- Main unit dimensions: 4" long x 3-3/8" wide x 1-1/8" tall
- Control knob dimensions: 1-7/8" long (including knob) x 9/16" wide x 3/4" tall
- Length without knob: 1-1/4"
- Output voltage range: 9V - 32V
- Output current rating: 25 amps continuous
- Maximum charging voltage: 12V DC
- 2-Year warranty
Tow-Pro Elite Operation
The dash-mounted knob puts control of your trailer's brakes at your fingertips. In addition to offering fast, simple power adjustment and an easily accessible manual override, it has colored LED signals that let you know what the brake controller is doing at a glance.
When you are calibrating the brake controller for the first time, the LED lights will signal your progress. To finish setting up the device, you will need to drive your vehicle in a low-traffic area and brake 20 times or so to let the unit learn its orientation and the direction of travel. If your trailer is connected, the LED light will flash green/blue as it processes the information. If there is no trailer connected, the unit will still calibrate, just without the knob lighting up. The knob will stay blue longer as the calibration process gets closer to being done. When the display turns solid blue, initial calibration is complete. The unit will remain calibrated for the next time that you tow. If recalibration is required, it will happen automatically and without LED indication.
Once the brake controller is activated, you can use the knob to set the maximum amount of power that will be applied to your trailer's brakes. Typically, this power is only readjusted when you experience changing road conditions or if you switch over from a heavy, loaded trailer to a much lighter, empty trailer, or vice versa. To get more power to your brakes, rotate the knob clockwise toward 10. To decrease the power output, rotate it counterclockwise toward 0.
When you apply the tow vehicle's brakes, the knob will change from blue to red to signal that the trailer brakes are being activated. The higher the braking power output, the deeper the red that you will see.
The Tow-Pro Elite keeps the manual override within easy reach, great for stopping sway or controlling your trailer's momentum in emergencies. To engage the manual override, just press the control knob. This will activate the trailer's brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising.
User-Controlled Mode
The Redarc Tow-Pro Elite comes with a unique feature that lets you respond to any terrain or weather you meet while on the road. The user-controlled mode gives you direct control over your trailer's braking so you can have exactly the level of power output you need for any situation - perfect for off-roading or adverse weather conditions. In this mode, the Tow-Pro Elite will apply your trailer's brakes with the same preset amount of power each time you activate the brakes in your vehicle. Set the power low if you're towing through sand or mud so that the trailer doesn't stop with too much force and act as an anchor. When on a steep descent, set the power to a higher level to ensure that the trailer's momentum doesn't cause it to push against the tow vehicle.
To turn on the user-controlled braking mode, rotate the knob counterclockwise and apply your vehicle's brakes. Push down on the remote knob twice (2 times within 1 second) and release the brakes. The knob will turn green to let you know that the mode has been activated.
Simple, Out-of-the-Way Installation
Unlike most proportional controllers on the market, the Tow-Pro Elite has almost no mounting restrictions. It comes in 2 pieces - the main unit and the control knob. Because the only part that you need to be able to access is the control knob, the main unit can be mounted out of sight and out of the way. You don't have to worry about dinging your knee on a bulky brake controller or having something in your cab that could interfere with your vehicle's lower airbags.
The dash-mounted control knob can be installed in any convenient spot that's easy for you to see and access. This can be a blank switch panel, an open spot on your center console, or wherever there's space on your dashboard. A universal mounting panel is included to ensure a clean, from-the-factory look. Custom-fit panels are available for certain vehicles as well. Before you do any drilling, be sure there's room behind the dash for the entire knob to install, including the part you don't see!
Once you've decided where you want to put the control knob, you'll need to find a good place to install the main unit. Your only restriction is the 3' plug-in cable that has to be able to reach between both the main unit and the control knob. Securely mount the box using screws, double-sided tape, or zip-ties (not included). A mounting kit (RE67FR - sold separately) is also available for the Tow-Pro Elite. Do not zip-tie the box to wiring or cables that can shift as you drive.
The included adapter connects the main unit to a vehicle-specific Tekonsha wiring harness for an easy plug-and-play installation. There's no splicing or hardwiring. Plug one end of the adapter into the wiring harness and the other into the Tow-Pro Elite and you're done!
For assistance in properly wiring the Tow-Pro Elite, please refer to the diagrams below:
Installation Accessories
See etrailer.com's exclusive 7- and 4-way brake-control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.
A 30-amp circuit breaker kit (331-CBK30-EB - sold separately) may also be required for installation.
Proportional Braking
The Redarc Tow-Pro Elite brake controller comes equipped with proportional braking to give you the best towing experience. Proportional braking means that your trailer brakes mimic your tow vehicle's brakes. If you slam on the brakes in your vehicle, your trailer brakes will activate with the same intensity; if you brake lightly, your trailer brakes lightly too. The trailer's braking is in proportion to your vehicle's braking. This saves wear and tear on the tires and the brakes on both your vehicle and trailer.
The Tow-Pro Elite uses an internal 3-axis accelerometer to sense how your vehicle is braking so it can send the right amount of braking power to your trailer. It measures the inertia of your tow vehicle and activates the trailer's brakes to slow at the same rate. The result is uniform braking across your towing setup. No push-pull action - just smooth, proportional braking every time.
EBRH-ACCV3 REDARC Redarc Tow-Pro Elite Trailer Brake Controller with Tekonsha Harness - Dash Mounted Knob - Hidden - Proportional Brake Controller
TPH-017 Redarc Tow Pro Wiring Loom Adapter for Existing Tekonsha Brake Controller Harness Connection
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Jeep
part number: 3073-P
Install your electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port in your vehicle.
Features:
- Plug-in wiring adapter allows for quick, simple installation of your electric trailer brake controller
- No cutting or splicing required
- Custom connector end plugs into the built-in port in your vehicle
- Other end plugs into the back of your electric brake controller
- Compatible with time-delayed and proportional brake controllers from TrailerMate, Draw-Tite, and Tekonsha
- Brake controller must have built-in plug for adapter to connect - will not work on controllers with pigtail wiring harnesses
- 1-Year limited warranty
Note: To illuminate your vehicle and trailer brake lights when you activate the manual override on your brake controller, use this adapter in conjunction with the Tekonsha brake controller converter with 7-way adapter (30235-P - sold separately). Required for use in the state of California.
Installation of Tekonsha Brake Controller Adapter
This adapter plugs into the 5-pin connector on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal.
To install your electric brake controller you need to connect the wiring of the controller to your vehicle. Certain manufacturers offer pre-wired options, typically known as tow packages, wherein these wires are run for you from the dash to the trailer connector on the back of your vehicle. Often, a brake controller wiring harness is included with your tow package. This harness plugs into a port beneath your dash and connects to the four wires of the brake controller. If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter.
This adapter requires no cutting or splicing of wires to install. It is designed to plug directly into your electric brake controller for the simplest installation possible. Because there is no hardwiring, installation is not permanent. You can unplug and remove your brake controller at any time and securely stow it away.
307300 Tekonsha Brake Control Wiring Adapter with 2 Plugs
Replaces Tekonsha 3073-P
Item # 3073-P
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness - 2 Modes - 1 to 3 Axles - Proportional - RED63RR
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Jeep - 3073-P
Average Customer Rating: 4.8 out of 5 stars (1700 Customer Reviews)
Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight with the included wiring harness. The Elite's user-controlled mode lets you respond to any weather or terrain. Install your electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port in your vehicle.by: Chuck from Vermont04/04/2023
This Redarc pro elite looks great in my 23 Subaru ascent; it looks factory. I mounted remote head in front of shifter(very easy to get at)where there was an empty blank.Mounted module to one of column support bracket in spot where it would not interfere with any adjustments of column. By far the longest part was modifying blank with dremel tool to perfectly accept remote head(45 min)(but worth going slowly and taking the tim)This was a completely plug-n-play install.this kit put together by etrailer came with all harnesses so all could be just plugged in; this is why I always use etrailer; I know they have already done the behind the scenes vetting of every product they sell. THANKS ETRAILER
by: Billy02/01/2023
Purchased a 22' R-Pod 192 TT to pull behind my 2019 Benz GLS450 with a factory tow package. It was equipped with the "green brake connector" located by the left kick panel. Contacted etrailer to help choose the correct combination of parts for my vehicle. Was suggested the Redarc EBRH-ACCV3-NA Brake Controller and a TPH-017 Wire Harness. Once products were received, still needed a harness from the green connector to the unit. Wrote to manufacturer in Australia and was told also needed etrailer part number 3066-P. Ordered. Now had everything needed. However, where to mount the switch? One individual with the same Benz mounted it next to the cup holders, but he didn't have a switch for the cold/hot--I did. There was no where else to drill a 1" hole. Got an L-bracket from hardware store and modified it to accommodate the switch. Mounted the main unit securely to the underside of the dash panel and used 3M Dual Lock tape to attach it--no holes to drill. Haven't had an opportunity to tow yet; however, did follow the instructions for the initial "learn" by driving and braking without a trailer attached. Been quite a challenge, but happy with the results and support from manufacturer and etrailer. Happy Camping!
by: Howard 08/24/2022
Plug and go installation. Works great!
by: Craig 12/01/2023
The trailer brake wiring harness fits like an OEM part. Very good quality, fits perfectly. This is my second Tekonsha Trailer Brake unit and their products have performed flawlessly.
by: Gary 03/21/2024
Made hooking up controller easy
by: Chuck 02/10/2024
Correct part delivered, as ordered. And delivery wasn’t a very long time frame. ETrailer continues to be my first stop for anything towing.
by: Brian 02/02/2024
Next level of brake controller
by: Ron04/15/2022
Jeep
Plug and play harness that is correct for the Jeep.
Ron
4/16/2023
Still performing perfectly
by: Harold 02/12/2024
Clean installation
by: Richard 11/17/2023
Best brake controller I’ve had. Very easy to use and adjust
by: Michael 09/05/2022
Jeep
Quick and easy on Jeep Gladiator.
Michael
9/6/2023
Works great. It allowed quick and easy connection.
Mike L.
10/27/2023
@Michael Great, we're glad to hear that!
by: Chris08/23/2023
I installed this in a 2023 RAM Promaster 2500 159WB van with factory installed hitch. There wasn't much info on how to do this.
by: Donald 11/02/2023
Wow!! Our horses love it! Braking is so smooth now with our 45’ horse trailer.. wish we had this 10 years ago
by: Dominic08/18/2022
Product was delivered as expected. Very good. The reason for only two stars is that the control knob was broken. No LED lighting which apparently causes the whole unit to not function properly if at all. Customer service is supposed to be sending a replacement on emergency status. I hope this is the case as I’m supposed to picking up a new trailer on Tuesday 8/23/22 and a functional break controller is needed. My rating would be much higher had I not had this issue. Hopefully it gets handled right away and I have the replacement by Monday 8/22/22.
by: Harlan 02/27/2024
Shawnee E was extremely helpful. Made all the difference in my purchase decision.
by: Ed02/17/2023
Part of my 22 Bronco hitch installation process. Installed super easy. I watched the Chase Gentry video on [online] before hand, very helpful.
by: Ray J11/12/2020
Used this in my Gladiator and it has performed as expected. I pull a trailer that comes in just under 4K lbs. dry with electric brakes and they perform exceptionally well. Install was quick and mostly painless other than the slight gymnastics required to get at the plug in the vehicle. The brake controller is mounted by my right knee and the cable was plenty long enough.
Ray J.
11/13/2021
About 15000 miles pulling the camper so far and I have not had to revisit this cable.
by: Todd03/11/2021
Used this for my 2020 Jeep Gladiator and it was super simple to install. Just plug and play. Jeep leaves the end kind of dangling under the left side of the dash and the adapter just plugs right in. I used the Tekonsha Prodigy P3 brake controller and together they have worked perfectly pulling my custom camper
Todd
3/12/2022
Working great
by: Jason 03/15/2024
The install was quick and easy looks good and works as advertised excellent product
by: Leslie03/10/2022
wiring adapter did not fit. the connection on the controller end was for a different type brake controller. I had to cut and solder wires to fit hard wiring harness to custom wiring harness to use. I e'mailed as no one would answer phone calls and was told that there would be no issue and the custom harness was plug and play. Not true!
Heather A.
3/22/2022
It looks like you are trying to use this wiring harness on the 2020 Jeep Gladiator with the Redarc brake controller part # RED44FR. You will need to use the adapter part # 331-TPH-017 to use the Tekonsha wiring harness with the Redarc without hardwiring.
by: Chris09/03/2020
This does not connect to the TowPro elite controller without cutting it and them splicing it to the controller tail. No where in the description does it say this and you are paying a $100 for something you HAVE to modify. I was told by their tech that an adapter for Jeep to the TowPro elite controller is not made. You will now have to spend more money to buy butt connectors and heat shrink to make it work. NOT PLUG AND PLAY!
Heather A.
9/22/2020
The Tekonsha Custom Wiring Adapter for Trailer Brake Controllers part 3073-P is recommended with the Redarc Tow-Pro Elite part 331-EBRH-ACCV2 so that you do not need to splice into the vehicles wiring. The plug does plug into the vehicles factory plug under the dash and can be connected to the 331-TPH-017 adapter that plugs into the brake controller so splicing is not needed.
by: LTC James C. Ret.10/26/2022
Roger R, Thanks for your professional assistance getting the brake controller delivered on short notice. It was easy to install, Plug and Play. I did a test run..Perfect. Once again Thanks for taking care of a fellow Combat Solider! I'll be RVing for the next 20 years. Got your number at rtrailer..
by: Rollin01/28/2024
worked fine.
by: Edward 02/03/2024
2021 Jeep Gladiator
Easy as just plug it in
by: Dan 10/07/2022
Perfect small option. I mounted it to one of the blanks to the left of the steering wheel in our Ascent. It is super easy to reach while driving and keeps with a clean factory look instead of a visible box with led screen.
25
1667
Show More Reviews Ask the Experts about this Trailer Brake Controller
Do you have a question about this Trailer Brake Controller?
- Recommended Brake Controller for a 2022 Ford Explorer w/ Factory Towing Package
- Since your 2022 Ford Explorer has the factory tow package you can use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers item # 3035-P to install the Redarc Tow-Pro Elite item # RED63RR. This adapter will connect to the one that comes with the Tow-Pro Elite and allow you to plug into a port located behind the appearance panel on the driver's side. Just remove the two screws to get the panel to drop, you are looking for a grey plug. The grey plug is sometimes taped together
view full answer... - Parts Needed For Brake Controller Installation On a 2021 Ford E-450 Cutaway Chassis For Class C RV
- To verify if your 2021 Ford E-450 cutaway chassis for your Class C motorhome is pre-wired for a brake controller you will need to remove the storage slot in the top of your dash. I have included a install video below that shows how to remove the storage tray to access the connector at the 16:30 time in the video.
With the factory connector you can use the Tekonsha Plug-In Wiring Adapter # 3034-P to install the Redarc Tow-Pro Elite Brake Controller # RED63RR. This will allow you to add
view full answer... - Plug in Adapter for a Redarc Brake Controller on a 2019 Ford E-450 Cab and Chassis Motorhome
- Yes, we do have a plug in adapter for your 2019 Ford E-450 cab and chassis motorhome. It is item # 331-TPH-007. The Redarc Tow-Pro Liberty item # RED63RR is a great brake controller but that part number comes with a universal wiring harness you won't need. Instead, you will want the Redarc Tow-Pro Liberty Brake Controller item # RED24FR. This is a similar brake controller but it will save you money because you do not need to buy the kit with the universal harness.
view full answer... - Parts Needed To Install a Redarc Tow Pro Elite Brake Controller On a 2023 Subaru Ascent
- First you will need a Tekonsha Plug-In Wiring Adapter # 3062-P to connect to the factory tow package wiring on your 2023 Subaru Ascent. This will allow you to connect to the Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness # RED63RR. The controller includes a universal Mounting Panel # 331-TPSI-001 allowing you to give it a factory appearance.
view full answer... - Proportional Brake Controller Recommendation for Motorhome with Air Brakes
- I really like the Redarc Tow Pro Liberty part # RED52VR as it's proportional like you mentioned, is compatible with vehicles that have air brakes, and it only puts a small knob on the dash of the vehicle.
view full answer... - Best Brake Controller for a 2023 Jeep Gladiator with the Factory Tow Package
- The absolute best brake controller for your 2023 Jeep Gladiator with the tow package is the Redarc Tow-Pro Elite and the corresponding wiring adapter:
- Tow-Pro Elite # RED63RR
- Custom Wiring Adapter # 3073-P
I really like this option for 2 reasons; the first being that the control knob can be installed virtually anywhere in your cab for a truly custom application, and the second being that this controller has both proportional and user-control braking options. Proportional is
view full answer... - Recommended Trailer Brake Controller For a 2023 Jayco Melbourne On Mercedes Sprinter 3500 Chassis
- I recommend the Redarc Tow-Pro Elite Brake Controller # RED63RR for your 2023 Jayco Melbourne. This uses a small control knob mounted to your dash so you do not have to deal with a large box like other controllers use mounted to the dash. The Adapter # 3063-P will plug into the factory connector on your Mercedes Benz 3500 Sprinter chassis.
view full answer... - Recommended Brake Controller For A 2024 Chevy Silverado 1500
- For your 2024 Chevy Silverado 1500 I recommend the Redarc Tow Pro Elite # RED63RR. You can use it along with the Plug in Adapter # 3064-P for a plug and play install, since you already have the factory tow package. The Redarc controller is going to be completely hidden behind the dash. All you will see is the control knob, which is about the diameter of a nickel. So it will have a very clean factory look, and the control knob is very easy to use once you get the hang of it.
I have linked
view full answer... - Brake Controller and Wiring Recommendations for a 2023 Ford Maverick
- To add a brake controller to your 2023 Ford Maverick I recommend installing the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter # TK95VR to get the wiring and then the Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness # RED63RR for the brake controller end of things.
The Tekonsha wiring kit gets you all of the functions you need for your trailer functions and then the Tow-Pro Elite controller can be installed virtually anywhere in your truck cab and
view full answer... - Will the Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness Work While in Reverse
- The Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness part # RED63RR will work in reverse just as it does when driving forward. The controller is proportional so it's not going to send a bunch of braking to the trailer while in reverse as you'll typically be at low speed. It will however still apply the brakes when you step on the pedal. If you need more braking while in reverse like backing down a hill, you can simply use the manual override feature.
view full answer... - Should LED be Solid Blue Right When Installing Redarc Tow-Pro Elite
- Since you haven't finished calibrating the Redarc Tow-Pro Elite # RED63RR yet it won't be solid blue right away. Once you calibrate it will be on all the time if you are in proportional mode. As for the best method there isn't one; you can with or without a trailer attached like you mentioned and it truly won't make any difference at all. It's easier without a trailer attached (because you aren't hooking up the trailer) so that's what most people do.
view full answer... - Plug and Play Wiring Adapter For a Redarc Tow-Pro Elite Brake Controller in a 2023 Subaru Ascent
- Yes, there is a plug-and-play harness for installing the Redarc Tow-Pro Elite Brake Controller # RED63RR in your 2023 Subaru Ascent with tow package.
You just need the Tekonsha Plug-In Wiring Adapter # 3062-P. This adapter connects to the wiring harness included in the Tow-Pro Elite # RED63RR kit, to provide the plug-and-play installation you are wanting.
view full answer... - Brake Controller Wiring Adapter for a 2004 Lexus LX 470
- Yes, if your 2004 Lexus LX 470 has the factory tow package then you can use the Tekonsha Plug-In Wiring Adapter # 3040-P along with the Redarc Tow-Pro Wiring Adapter # 331-TPH-017 so you get a plug and play type of installation for the Redarc Tow-Pro Elite Brake Controller # RED63RR.
Attached are some videos for you to check out!
view full answer... - 2024 Chevy Silverado 1500 - No Power At Brake Control Plug Under Dash
- Hey Fred, have you checked the fuse box yet? Since the vehicle is brand new you are likely just missing the fuse needed to activate the trailer brake control circuit. Your owners manual will specify the exact fuse location for the trailer brake control module but you will just need to check this location and make sure the appropriate fuse is inserted. Based on what I can find online it should be in the engine compartment fuse box # 63, but you will definitely want to check your owners manual
view full answer... - Can You Install Redarc Tow-Pro Elite Brake Controller on 2022 Ford Bronco Without Splicing
- In order to install the Redarc Tow-Pro Elite Brake Controller part # RED63RR on a 2022 Ford Bronco you'll first need the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 22292 which will make for a plug and play install up at the front of the vehicle. Then, you'll need a 4-way and 7-way adapter at the rear for which I recommend both the Curt T-Connector Vehicle Wiring Harness part # C42WR and 4 to 7-Way with 4-Way Adapter part # ETBC7. The factory brake controller wires
view full answer... - Recommended Trailer Brake Controller for 2023 Jayco Redhawk 24B
- The Redarc Tow-Pro Elite Brake Controller part # RED63RR is a great option for a 2023 Jayco Redhawk 24B and can be plugged directly into the port in the dash (behind the spare change tray) using the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 3034-P. The sleek design of the Redarc will then allow for a very factory like-install without a knee knocker in the way.
view full answer... - Parts Needed To Install a Trailer Brake Controller On a 2024 Jeep Gladiator
- For your 2024 Jeep Gladiator I recommend the Redarc Tow-Pro Elite Brake Controller # RED63RR which will plug into your factory harness using the Adapter # 3073-P. I prefer the Redarc for your Gladiator as it has the small control know which doesn't take up much room on your dash. It also has both a user controlled mode which is great if you tow off-road and a proportional mode which works best for towing on the road.
view full answer... - Are There Instruction For Installing A Redarc Brake Controller On A 2023 Subaru Ascent?
- Hello Bruce. We do have some instructions for installing the Redarc Tow-Pro Brake Controller # RED63RR. I have linked a few install videos as well as the manufacturer instructions for you below. That said, we do not have any videos or literature showing installation specifically on a Subaru Ascent, but it should still give you a good enough general idea of the process so you can get it done.
Installation on a 2023 Subaru Ascent is going to be very straightforward. A few years back I had
view full answer... - Best Trailer Brake Controller for a 2021 GMC Sierra 1500
- The best trailer brake controller for a 2021 GMC Sierra 1500 is the Redarc Tow-Pro Elite Brake Controller part # RED63RR. This is a hidden controller so you don't have to worry about banging your knee on the controller when you get in/out like you would for a traditional style brake controller nor do you have to deal with the unsightly appearance of a bulky dash mounted controller. It can also be simply plugged into a port under the dash for a splice free install when using the Tekonsha
view full answer... - Is Install of Redarc Tow Pro Elite Brake Controller on 2023 Subaru Ascent Difficult
- The Redarc Tow Pro Elite part # RED63RR will install very easily on your 2023 Subaru Ascent with the factory tow package using the install harness part # 3062-P which plugs into a port under the dash of your vehicle. It's very easy to do for sure.
view full answer... - Parts Needed to Add 7-Way to 2018 Jeep JL Wrangler
- We can get your 2018 Jeep JL Wrangler set up with a 7-way, and there are a couple of parts needed, as the only way to add the 7-way is by hardwiring one in. You do have the first part that is required, which is the 4-way, the Curt T-Connector Vehicle Wiring Harness # C56407.
Then, in order to add the 7-way connector, circuit breakers and rest of the hardware needed for installation you will need the following part:
- Universal Installation Kit for Trailer Brake Controller # ETBC7
This
view full answer... - Tekonsha Custom Wiring Adapter and Weight Distribution Drop Shank For Lifted 2022 Jeep Gladiator
- Yes, the Tekonsha Custom Wiring Adapter # 3073-P is the correct harness to mount your Tekonsha Prodigy P3 Trailer Brake Controller # 90195 in your 2022 Jeep Gladiator.
The Curt Weight Distribution Shank # 17120 has the 8 hole mounts that you are looking for. This shank uses the same 3/4" holes that are spaced 1-1/4" on center on your Eaz-Lift R3 weight distribution hitch. This will allow you to level your trailer with your new Gladiator.
view full answer... - Which Install Harness is Needed to for Tekonsha P3 Brake Controller and 2021 Jeep Gladiator
- A Tekonsha brake controller install harness 3073 is the same as the harness part # 3073-P which is the correct harness to install a Prodigy P3 # 90195 in your 2021 Jeep Gladiator.
view full answer... - Brake Controller Plug-and-Play Harness For 2020 Jeep Gladiator
- The Tekonsha Custom Wiring Adapter - Jeep # 3073-P is the product you're looking for.
This adapter plugs into the 5-pin connector on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal.
This product is all you need as long as your 2020 Jeep Gladiator is equipped with the factory towing package.
This adapter requires no cutting or splicing of
view full answer... - Will The Tekonsha Custom Wiring Adapter 3073-P Fit A 2022 Jeep Gladiator W/ Tow Package?
- Yes, the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers # 3073-P will be a plug and play installation for your 2022 Jeep Gladiator.
This adapter is compatible with time-delayed and proportional brake controllers from TrailerMate, Draw-Tite, and Tekonsha like your Tekonsha Voyager 9030, or the Tekonsha Primus IQ Trailer Brake Controller.
view full answer... - What Wiring Harness Do I Need to Install the Redarc Tow-Pro Elite on My 2021 Jeep Gladiator?
- In order to use the Redarc Tow-Pro # RED44FR on your 2021 Jeep Gladiator (with factory tow package), you will need the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Jeep # 3073-P. With this wiring harness, you will be able to install the plug into the custom connector in your vehicle.
view full answer... - Is Redarc Tow-Pro Elite Plug-And-Play on 2022 Jeep Gladiator With Factory Tow Package?
- Yes it is, the Tow-Pro brake controller is indeed a plug-and-play install without any added wiring needed for your 2022 Jeep Gladiator with the factory tow package. You'll need a couple different parts though, which are the following:
- Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR
- Tekonsha Custom Wiring Adapter # 3073-P
- Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness # 331-TPH-017
Since the Tekonsha adapter doesn't plug into the Tow-Pro Elite
view full answer... - Parts Needed To Install A Redarc Tow-Pro Elite Brake Controller On a 2020 Jeep Gladiator
- Yes, you will need a Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness # 331-TPH-017 to connect the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR and Tekonsha Custom Wiring Adapter # 3073-P.
I have linked an installation video below that shows how all the pieces connect and are installed on your 2020 Jeep Gladiator.
view full answer... - Plug-In Custom Wiring Adapter For A 2021 Jeep Gladiator
- Although the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3073-P and the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers # 3035-P may look similar, they do have slightly different connectors.
For this reason, you won't be able to use the # 3024-P with your new Jeep Gladiator, and instead will have to use the # 3073-P that you were looking at.
This plug-in adapter is designed to work with your Gladiator, and is compatible with TrailerMate, Draw-Tite,
view full answer... - What Plug-N-Play Wiring Harness will Fit My 2021 Jeep Gladiator for a Brake Controller?
- If you are looking for a plug-n-play brake controller wiring harness for your 2021 Jeep Gladiator with a 7-way already installed, all you need is the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers # 3073-P. This adapter simply plugs into your built-in port in your vehicle without the need for splicing.
To add a brake controller, I recommend the Tekonsha Voyager # 39510 or the Curt Echo # C51180. Both of these controllers are proportional controllers which means that the
view full answer... - How To Install Brake Controller On 2018 Jeep JL Without Access To Cold Side Of Brake Switch
- If the 2018 Jeep JL Wrangler has a factory tow package you can just use a Tekonsha Brake Controller p3 part # 90195 with a brake controller harness part # 3073-P to install a brake controller in the Jeep. The harness will plug into a port under the dash and you will not need to worry about hard wiring to the cold side of the brake switch.
If your 2018 Jeep JL Wrangler did not come with a factory tow package, you can install a brake controller two different ways. The easiest way is to
view full answer... - Brake Controller Recommendation for 2020 Jeep Cherokee Trailhawk with Factory Tow Package
- Tekonsha has a brake controller install harness that is a fit for your 2020 Jeep Cherokee with the part # 3014-P but the 3073-P that you mentioned is not a fit so it's not what we recommend.
For a brake controller I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies
view full answer... - How to Install the Redarc Tow-Pro Brake Controller in a 2007 Jeep Wrangler
- To install the Redarc Tow-Pro Elite Trailer Brake Controller in your 2007 Jeep Wrangler you will need the item # RED44FR. This kit includes the universal wiring harness required. The 2007 Wrangler's did not include a port for a plug in adapter so hardwiring the brake controller is your only option.
view full answer...
Info for these parts were:
Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Video by:
Chris R
Updated by:
Wilson B
Updated by:
Michael B
Written by:
Alexander C
Test Fit:
Conner L
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Howard B.
9/1/2023
Works Great!