How to Install the Redarc Tow-Pro Brake Controller in a 2007 Jeep Wrangler

Question

Question:

I want to connect this controller to my 2007 Jeep Wrangler. What parts will I need to purchase in order to install this unit.

asked by: James W

0

Expert Reply:

To install the Redarc Tow-Pro Elite Trailer Brake Controller in your 2007 Jeep Wrangler you will need the item # RED44FR. This kit includes the universal wiring harness required. The 2007 Wrangler's did not include a port for a plug in adapter so hardwiring the brake controller is your only option.

expert reply by: Jerred H

0

Answer 1

Yes, you can run the Firman generator part #FIR54FR in parallel with the parallel kit #333-0007.

view full answer...

Answer 2

What you need is a splitter or dual adapter like part #MBS54FR and this will work for you as long as your tank's connector is threaded on the inside not just the outside. If it's threaded both in and out that's okay too…

view full answer...

Answer 3

You can absolutely use a 40 lb tank with the Firman 10,000-Watt Portable Generator - 8,000 Running Watts - Propane or Gas - Electric Start #333-H08051 you asked about. The reason why we often give a solution for two 20 lb propane tanks using an…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Answer 9

By all accounts the Curt Spectrum Trailer Brake Controller #C51170 works well and is easy to use and install on most vehicles. It is a brand new item so not a lot of feedback has come in on it. I did learn a few things though after speaking with our…

view full answer...

Answer 10

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 11

For your 2024 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. I like the Liberty because it is simple, reliable, and looks great in any vehicle. The main unit installs behind the dash, so only the control knob will…

view full answer...

Answer 12

Yes, when installing the knob for the Redarc Tow-Pro Liberty Brake Controller item #RED24FR you will want to remove any extra material behind the insert. I am happy the video was able to help you out. I have linked a couple of pictures from the video…

view full answer...