Part Numbers: C16180,C16420-204
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Tow up to 25,000 lbs with this heavy-duty fifth-wheel trailer hitch. Interlocking jaws and a color-coded lock indicator provide safety. Torsion head offers easy hookup and quiet, stable towing. Rails and universal installation kit sold separately.
Features:
Specs:
Note: This fifth-wheel hitch is compatible with rotating pin boxes, such as the Reese Sidewinder, Reese Revolution, and 5th Airborne Sidewinder, only when used with a wedge (sold separately).
Unlike slide-bar models, the rounded, interlocking, two-piece jaw on this fifth-wheel trailer hitch inhibits rattle and movement by securely wrapping around your trailer's king pin, resulting in easier hookup and a safer, quieter ride.
Get peace of mind with Curt's color-coded lock indicator. Just look at the indicator - either the one on the handle or the one on the hitch itself - to determine whether the jaw is in the correct position to uncouple (red), couple (yellow) or tow (green).
Install your fifth-wheel trailer hitch in half the time with this vehicle-specific bracket kit. Requires no drilling and provides a custom fit for your vehicle. Includes everything you need for installation.
Features:
Average Customer Rating: 4.7 out of 5 stars (490 Customer Reviews)
Tow up to 25,000 lbs with this heavy-duty fifth-wheel trailer hitch. Interlocking jaws and a color-coded lock indicator provide safety. Torsion head offers easy hookup and quiet, stable towing. Rails and universal installation kit sold separately. Install your fifth-wheel trailer hitch in half the time with this vehicle-specific bracket kit. Requires no drilling and provides a custom fit for your vehicle. Includes everything you need for installation.2012 ram 3500 mega cab short bed! Well from all the reviews I’ve read, and the video, I gathered about 5-6 hours to install by myself, which was very accurate, directions say 90 min instal, not! It was the 5-6 hour range, regardless it went in as the directions and video said! Take your time measure it out double check everything, the kit is great, follow directions and watch the video you can do it in your driveway!
Takes a bit longer than expected. Figure in a day for the above bed install kit. I'll post back after I make a 2000 mile trip with the 40' RV. Have a great day everyone!
I had to customize some of the brackets to make them work on my truck. As well as add some spacers under the front rail so when it was tightened it would remain flat. The kit is usable if you have the ability to make it work. But when I buy something like this I expect it to go on without messing with it.
THE RAILS AND BRACKETS WERE JUST AS DESCRIBED AND CAME VERY QUICKLY AND REASONABLY PRICED. THE INSTRUCTIONS WERE VERY HELPFUL INCLUDING THE VIDEO ONLINE. INALL IT TOOK ME ABOUT 5 HOURS TO INSTALL WITH TAKING MY TIME TO DOUBLE CHECK EVERYTHING. IT FIT JUST AS IT SAYS AND FIT MY PICKUP PERFECTLY. GREAT PRODUCT AND GREAT COMPANY
Ive been using this fifth wheel set up for about 5 months now and I don't have any complaints. I pull a 2022 Heartland Cyclone 4006 toyhauler fifth wheel. Loaded down its usually weighing between 18 to 20,000 lbs depending on what we are hauling.
This is a well put together package. The fact that you do not have to drill the frame makes things much easier. That said, it is still a lot of work and if you do not have all the tools needed and a lift you will be at this install for quiet some time.
The spare tire has to be removed and if there is a spare tire shield it will have to go as well. The inner fenders need to come out and at that point you will find it is easier if the tires and wheels are out of the way. It is a bit of work to get the right rear bracket in with the tail pipe in place. Also the spacers that go into the frame are also hard to get in place. Lastly, you will still have to drill holes in the bed.
With all this work required, I am very glad that I did not have to drill the frame also.
Ordering from etrailer was a great decision! I got a confirmation email for my order within minutes and an email it had shipped in just a few hours. I was given an expected delivery date and it actually showed up a day early. I’m super impressed with the customer service! I bought a fifth wheel hitch and found an [online] video for my truck and hitch that was extremely helpful, especially since all the RV dealers in the area were two months out to install it. All in all dealing with etrailer has been a great experience and I will definitely be going back for any of my other RV needs!
Easy to order from etrailer with fast shipping. Ordered on Mon estimated delivery on Fri but came in only 2 days for a deliver Wed. Curt A25 hitch packaged very well good instruction easy assembly on tailgate filling installed and torqued in less that 30 mins.
It is well built. Directions could have better illustrations. Putting handle together was the most difficult part of process. It dropped right into my existing rails. Have not hooked my fifth wheel yet, but very satisfied with the finished product.
The hitch has worked well for us . I wish it would go up 2 inches higher as it is close to the box have not had any problems though
I could not be happier. It's solid, no sway while towing and no banging when I hit the brakes. Great product and I would highly recommend it!
The hitch arrived as promised and in perfect condition. Couldn’t ask for better customer service. Looking forward to towing with the Curt A25.
I’ll amend this review after I tire with it. Super happy with etrailer!!
fair price. Simple installation.
2005 Ram 2500 Quad Cab Short Bed. Xlnt kit, easy install. The installation instructions could have been better. I suggest watching the video on youtube and setting up the rails and hitch on the garage floor first. Take measurements between rail hole rows (row 2 to row 3 - 17 3/4") and add 3/4" for front bed support clearance - 18 1/2". Looking over a rear tire and measuring from the front bed support, My row 2 needed to be rear of center by 1/2". This puts my rear rail at 26 1/4 instead of 26 3/4" from the tailgate. Then everything lined up perfect. The fish wire provided really works great ( threads on to the bolt like a nut). My only problem was the spacer that gets fished with the carriage bolt was to wide for the large hole in my frame. I cut a 1/4" off the spacer and that was the only modification I made to this kit. Not all trucks are the same. XLNT kit, I was impressed !
Jerry C.
3/27/2014
This is a little confusing. Is the correct measurement 26 34 or 26 1/4 ??I installed a Curt rail kit a couple years ago. I do recall that if you use the instructiondimension...things line up better on a Dodge front rail if everything would have been about a 1/2 inch further rearward. Is there any way this can be clarified? I am starting on another install today. thanks.
Packing was horrible. Smaller box inside a bigger box just bouncing around that created a big hole. All the bolts and nuts came free from packaging and were all over. Not to mention the ones that got lost.
It was poor delivered and packaged. I don’t even know if all the parts are in there yet till tomorrow. There was a huge hole delivered and they even tried to patch up the box. SMH
Great customer service, thanks for the help…
Fish wire was too short for long bed installation. Instructions did not address how to clear my brake lines on the left side front bracket. Overall the installation was not as easy as the video depicts. I am a professional mechanic for over 30 years.
So here I am 1 year later and 7000 + miles later having towed/hauled a 30' Keystone Cougar with the Curt E16K hitch and bed rails.
I installed the item and it was fairly easy with the help of a friend to help tighten bolts and nuts. On the rails I have the E16K Curt Hitch in a 2007 - 2500 Dodge Ram Cummins. I used to remove the Hitch after every trip. That lasted for the first 2-3 times. It is darn heavy to remove and put back in. So now I leave it installed in the truck and remove it when/if I need to haul something in the bed.
Hope this helps your decision and Happy Hauling :o)
Took me a month, but I finally got the Curt A25 fifth wheel hitch in my truck and took it for nearly 150 mile trip to see how it would work. My wife and I both were amazed at how quiet and the bouncing, snapping, popping and cussing were all gone. This hitch is absolutely amazing. Before, when I just pulled out of my driveway, the old fifth wheel would snap and pop loudly several times. It was so quiet with the Curt A25 (new one), both of us looked at each other and looked back to see if the trailer was moving with us. (It was) Thank you to Curt for building it so well and to all of the people at etrailer that recommended it and ensuring it was all right.
My 5th wheel package was robbed during shipping.
When I received it, the box had obviously been opened and then taped shut.
When I opened it, the base of the 5th wheel hitch was gone!
I called etrailer's customer support and they were amazing.
I sent pictures of the package I took before and after I opened the package.
The customer support rep said that was all I needed to do.
And they shipped a new base two days later.
I just received the base of the hitch.
I am extremely happy that etrailer's customer support was so responsive when I had a serious problem!
Thank you etrailer customer support!
Had a Pullrite Superglide in my old F350 standard bed but when I upgraded to the 8ft bed of the dually, I went with this hitch. Hitch came in 2 boxes and although the boxes worked banged up a bit, everything was there and fine. It only took about 30 minutes to bolt everything together and install on the rails that were already in the truck. I actually had to take the hitch apart once to adjust the hitch up a little. I wanted it as high as possible in the bed, while still clearing the Roll N Lock retractable bed cover. Looks good, seems solid and well made. Hitch head comes off to make it easier to remove this hitch, but even with the head connected, I am able to move the hitch in the truck (would need to take head off for me to lift the hitch out of the truck). Also installed a BedRug at the same time to clean up the bed.
Curt A25 fifth wheel hitch... received in record time ,box was damaged and the pull arm was bent. Called Etrailer and they sent me another pull arm immediately. Great customer service, will continue to do business here. Thanks Molly and George
Installed on a 2012 Ram 3500 long box. The rail kit itself is excellent and appears to be very strong. I was able to install with the truck on the ground and the tires on. I did have to remove the inner fender liners to access some of the bolts for torquing. I do not see how the nuts can be brought to proper torque without the use of a 3/4 inch crowsfoot, as it is impossible to get a socket on some of the nuts. The shock mount welded to the frame on one side is an example...it prevents the use of a socket. The single most important step is measuring properly because there is very little margin for error. The etrailer.com video was very helpful. Took me about 6 hrs without jack stands or a lift, but I'm very happy with the finished product and they went on without interfering with my AIR LIFT 57295 LoadLifter 5000 Series Rear Air Spring Kit.
Don C.
8/26/2018
So far excellent!!!
The accessories weren't correct for my application but upon researching etrailer products was able to find the correct brackets for use under body.
Ask the Experts about this Fifth Wheel Hitch
Do you have a question about this Fifth Wheel Hitch?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sequel
9/9/2015
I still have no complaints I have pulled my 35ft fifth wheel camper multiple times already and it did great. I have since recommended etrailer site to everybody I know that needs hitches. Thank you again for making it so easy to order and install!