Selecting A Ball Mount When Trailer And Coupler Are Same Height
Question:
if your trailer height and coupler height are the same 14 inches I guess I need a straight hitch ,is that correct?
asked by: David A
Expert Reply:
When towing, the trailer should always be as level as possible. A level trailer will put less strain on the connection between the trailer and hitch. It will also help the trailer stay in line behind the vehicle. I have attached a couple of helpful articles that you can check out that explains towing and how to measure to make certain you get the correct ball mount.
After you have taken your measurements you can check out the attached link for the ball mounts we offer. Use the menu on the left of the page to find the ball mount that best serves your purpose and has the correct rise or drop.
For example if you are looking for a ball mount that fits a 2 inch hitch and want either a 1 inch rise or 2 inch drop you would first choose 2 inch hitch on the left of the page. Then choose either the Gross Towing Weight (GTW) size or Class size to find ball mounts to choose from. If you choose 12,000 lbs you can then use the menu on the left to select a Rise of 1 inch. Depending on the length you need you would have a choice of part # 4280 or part # 4284.
If you want to take the measurements and want to send me the information, I would be glad to make a recommendation that would work for you.
Products Referenced in This Question
Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 12" Long - 12,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Silver
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 12000 lbs GTW
- Class IV
- Long Shank
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Ball Mount for 2" Hitch - 1" Rise, 2" Drop - 8-1/2" Long - 12,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Silver
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 12000 lbs GTW
- Class IV
- Draw-Tite
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Locking Hitch Pin Kit Recommendation for 15K Curt Adjustable 2-Ball Mount
- Shop: Trailer Wiring
- Article: How to Measure for Trailer Hitch Drop
- Article: What Do I Need To Tow A Trailer?
- Shop: Blue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - 15,000 lbs GTW, 1,500 lbs TW
- Shop: Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Trailer Hitch
- Shop: Curt Replacement OEM USCAR Trailer Connector - Dual Connection - 7-Way RV Style and 4-Way Flat
- Shop: Curt Lock Set for Adjustable Channel-Style Mounts
- Shop: 35 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 42" Ground
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Shop: Curt TruTrack 2P Weight Distribution System w/ Sway Control - 7-Hole Shank - 10K GTW, 1K TW
- Shop: Blue Ox Adjustable 2-Ball Mount - 2" Hitch - 3-3/4" Drop, 3-3/4" Rise - 10K
- Article: Trailer Hitch Receiver Sizes
- Search Results: tow and stow
- Video: B and W Ball Mounts - Adjustable Ball Mount - BWTS10033C Review
- Video: B and W Tow and Stow 3-Ball Mount Review BW44FR
- Q&A: How to Determine Correct Ball Mount Rise or Drop for Towing a Trailer with a 17 Inch Coupler Height
- Q&A: How Close Does Trailer Ball Height Need to be to the Height of the Trailer Coupler
- Shop: Grille Guard
- Search Results: b w tow and stow
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: trailer hitch
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Brake Controller
- Q&A: Recommended Hitch for a 2024 Toyota Grand Highlander