I did some looking around and it doesn't actually look like there is a hitch that will work with your 2016 Mercedes-Benz C63 AMG. The hitch #C11485 you're looking at is only going to work with the C300 and will not work with…

There isn't any real difference between the Curt Trailer Hitch Receiver #13535 and the Draw-Tite Max-Frame Trailer Hitch Receiver #75690. The only real difference is that the Curt #13535 sits a hair more recessed measuring 8…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

It won't be harder to pull; a Class D with its 1,710 lb per-tire capacity is certainly viable and move up for the higher capacity and speed rating. Go with the 81 mph Kenda Karrier ST185/80R13 Radial Trailer Tire - Load Range D #AM10208.…

I hope I got the right measurement for you Roberto. I included a image with the measurement points that I took on the CargoBuckle Ladder Rack Straps #CB32MR below. If you are needing a different measurement please let me know.

If you've had offset wheels on your trailer from the beginning then it was by design from the manufacturer and would not be an issue. Switching away from an offset could mean that the wheels/tires end up rubbing against the body of the…

I have a solution but all dual hitch adapters are only rated for flat towing. To tow a trailer and haul a bike rack off of your vehicles hitch, I recommend the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers item #325-GH-514. This adjustable…

Hey Mark, thanks for the details! The Curt T-Connector #C56217 is actually designed for a Toyota Highlander or a newer model RX350 L which is one reason you're struggling to find the right connector on your 2019 Lexus RX350 L. Since your…

The Firestone In-Cab Pressure Gauge #F2196 will work with the AirLift systems. If you can tell me the part number of which AirLift kit you have I can try and help you with that system if you'd like.

The Draw-Tite Front Mount Trailer Hitch Receiver #65022 is rated for a 5,000 lb trailer and 500 lbs of tongue weight, and the amount of time isn't a factor. So you wouldn't be able to move a 10,000 lb trailer even if it is swift, as…

Yes, the Superchips Flashpaq F5 Performance Tuner #SU1845 will work for your 2003 Ford Explorer V8 4.6L. The SU1060 that you mentioned is an older model that came with a separate color display that can be mounted on the dash, and while this would…

Yes the Curt T-Connector Vehicle Wiring Harness #C55336 will work on your 2003 Honda CR-V with LED tail lights. No modifications of any kind will be required. This simply plugs in in your rear cargo area and is very easy to install. I have included…