Videos
for Wheel Covers Hubcaps
Help Articles
for Wheel Covers Hubcaps
Expert Answers
for Wheel Covers Hubcaps
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...You're welcome! The lightest weight wheel tire combo with a ST235/75R15 tire is the Taskmaster ST235/75R15 Radial Off-Road Tire w/ 15" Vesper Silver Mod Wheel item #TA75RR which weighs in at 55 lbs.
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...Our Baby Moon Hubcaps, parts #AM90086 and #AM981306, both fit conventional type steel trailer wheels like #AM20514. For your 15-inch 6-lug wheel you will want to use part #AM981306. This chrome-plated center cap snaps on.
view full answer...Yes, baby moon hub cap #AM90086 will fit Dexstar Conventional Steel Wheel #AM20514. This particular baby moon fits 13, 14, and 15 inch conventional steel wheels. I have linked a video featuring the baby moon hub cap for you.
view full answer...Pete, yes the Snap-In Plug for Lionshead Trailer Wheel Center Cap #LHSI60C are definitely not brittle and are better made than most. This is still made of plastic, has a chrome finish, and will work with 15" to 16" diameter wheels…
view full answer...Hey Jason, I spoke with Furrion and they stated that the Furrion Chill Cube is OEM only currently and should be released to the aftermarket distributors later on this year (2024), but there is no solid date. That says to me that they're…
view full answer...The spring hanger placement is going to be determined by your axle spacing. For example, if your axles are spaced 33 inches apart, as shown in the attached diagram, a 7K axle slipper spring, like #e74SR, requires a distance of 28-1/2 inches between…
view full answer...I was able to cross reference the Dexter Hub/Drum 8-415 to the Dexter Trailer Hub Drum Assembly part #8-430-5UC3 which should be an exact replacement. I don't have any depth measurements of the above/drum but what you would need to measure…
view full answer...Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…
view full answer...I wasn't able to cross-reference these numbers but if you're looking for new bearings/races and seals all you need to do is note the capacity or measure. The easiest method would be to crawl under the trailer and look for the axle tag…
view full answer...Hey Tommy, yeah we have quite a few hubs that fit the Lippert 2,200 lb axle spindles like the part #8-258-50UC1 which is an idler hub with a 5 on 4-1/2 inch bolt pattern. I also attached a link to a page that has all of the 2,200 lb hubs we offer…
view full answer...