Filter Products
Filter by Doors
$347.24 - $347.24
Videos
for UTV Tops
Help Articles
for UTV Tops
Expert Answers
for UTV Tops
Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…
view full answer...I went out to the warehouse to take a look at the Gustafson 12V RV LED Pendant Light w/ Light Shade #277-000456 and tried to disassemble it but they glued the screws in place on it so I wasn't able to take it apart without damaging the…
view full answer...I spoke with my contact at Classic Accessories and she stated that the All-Weather UTV Cab Enclosure, #CA18020, will fit all current models of the Kawasaki Teryx, including your 2008. I have included a link to the installation details for you.
view full answer...I checked with Classic Accessories and the Classic Accessories All-Weather UTV Cab Enclosure part #CA18020 is listed as a fit for a Kawasaki Teryx 750 till 2015. Therefore, yes, it will fit a 2007.
view full answer...The Dexter Nev-R-Adjust electric trailer brakes can be manually adjusted. There are a couple teeth of the adjustment wheel that are exposed just under the lever that you referenced. I have attached a photo showing the teeth. You will likely need a…
view full answer...With Curt Short Arm weight distribution systems like the part #C17322 that you referenced the distance from the center of the hitch ball to the far edge of the chain hanger will be 30-5/8 inches. A lot of times the best solution for V-nose trailers…
view full answer...I do have an option for you but there isn't a weight distribution system specific to an American Hauler Enclosed Trailer. It looks like the old owner welded some brackets to the frame for a system but I'm not sure which one that was. The best…
view full answer...I do have an option for you but there is not a longer version of the Replacement Square U-bolts for 26000 Dual Cam Sway Control part #58000 available. However, this is more or less irrelevant as you cannot use the Reese Dual Cam Weight Distribution…
view full answer...The parts in question are conical tooth washers. On the Curt weight distribution systems they go between the nuts and the head using the bolts that hold the head to the shank. I have included a picture that points them out for you. The tooth side…
view full answer...Is this by any chance on a 1/2 ton truck? If so then the suspension on 1/2 ton trucks can sag even when weight distribution is used. Using a shank that extends out further could help but then the weight distribution system might not be providing the…
view full answer...I do have an option for you but the Curt Bolt Kit for Trunnion Style Weight Distribution Hitch part #C17350 does not come with the spring bar retainer clips that you are referring to. Unfortunately, these retainers clips are not sold separately as…
view full answer...We have found a few brands that use their own unique weight distribution shanks, but for the most part they are universal, including your Eaz-Lift shank. You can verify this by measuring the diameter of the bolt holes (3/4 inch diameter) and the…
view full answer...