Filter Products
Filter Results
$31.79 - $51.70
$50.90 - $50.90
$49.14 - $55.88
$28.53 - $85.54
$57.61 - $79.18
$64.94 - $95.80
$64.94 - $79.18
Filter by Axle Compatibility
$31.79 - $51.70
$50.90 - $50.90
$49.14 - $55.88
$28.53 - $85.54
$57.61 - $79.18
$64.94 - $95.80
$64.94 - $79.18
Videos
for Trailer Spindles
Help Articles
for Trailer Spindles
Expert Answers
for Trailer Spindles
A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…
view full answer...If you take a look at the provided photo, you can see the pertinent dimensions of the #TRU37FR spindle.
view full answer...Thanks for reaching out, Dennis! I recommend going with the 230 lb capacity Conventional Ramp Door Spring for 8' Wide Enclosed Trailer #362SA8HD for your application. Although I don't know the exact weight of your…
view full answer...If you take a look at the provided photo, you can see the important dimensions of the #TRU37FR spindle.
view full answer...The brake mounting bolt pattern for the #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles #TRU87FR is 2-13/16" and then the section that fits into the axle tube is 2" and it tapers out to…
view full answer...Trailer spindles are welded directly to the axle so to remove one it just needs to be cut off completely using a torch or saw. Then to replace the spindle such as with the EZ Lube #TRU37FR that you were looking at it's extremely…
view full answer...To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are…
view full answer...The #42 E-Z Lube 4" Drop Spindle w/ Flange for 5.2K to 7K Trailer Axles - 3" Diameter #TRU39FR you were looking at is designed to fit snugly into a #42 axle, and the portion of the spindle that goes into the axle…
view full answer...The Grease Seal part #168233 has a double lip so it can be used on a boat trailer and be submersed under water, yes. This is also the correct replacement for the NOK AD2527E Grease Seal that you have now.
view full answer...Hey Jaime, yes you can replace your 25-1/4 inch 3,500 lb axle leaf springs with a 5k rated axle spring like the part #e44SR. This will increase the suspension's weight capacity and might make the ride quality a little rougher but it…
view full answer...There typically aren't any part numbers stamped onto the trailer spindle that can be used for identification. There are however numbers stamped onto the hub most times which can be used for identification. The TDE46210 tells me you…
view full answer...To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328…
view full answer...