Filter Products
Filter by Weight Capacity
$189.05 - $189.05
Videos
for Trailer Dolly
Help Articles
for Trailer Dolly
Expert Answers
for Trailer Dolly
Thanks for reaching out! The purpose of the Trailer Valet Trailer Wheel Dolly for Tandem Axle Trailers #TV56FR is to give you better maneuverability with a tandem axle trailer when utilizing a trailer dolly like the Trailer Valet XL #TVXL25. The…
view full answer...Hello Dan, I can definitely help with this. It is completely normal for the Curt TriFlex brake Controller #C24VV to show the current gain setting when the brakes are applied, or when the manual override is pressed. It sounds like you have the gain…
view full answer...You are correct that the Curt safety chains like the Curt Safety Chains with Latching Hooks #C19749 are made over seas, but that does not mean they are not still a quality part. Quite a few manufacturers of chains actually use products from over…
view full answer...Your safety chains would not cause your trailer frame to bend like you pictured even if the safety chains are barely long enough to attach. It would be wise to get longer safety chains, but you would need to have amazingly strong chains, bolts, and…
view full answer...The Trailer Valet RVR3 Remote-Controlled Trailer Dolly - Wireless Remote - 3,500 lbs #TVRVR3 you referenced has a tongue weight capacity of 350 lbs max. The mounting bracket with attach directly to your trailer tongue and has a quick release cotter…
view full answer...Hi Bill, The Fastway e2 Weight Distribution w/ 2-Point Sway Control #FA92-00-0450 has a tongue weight range of 200lbs - 450lbs so you'd be right around the middle of the capacity when loaded, making this a great choice. This…
view full answer...I checked the manual and also reached out to Blue Ox to confirm this but found no notes and Blue Ox stated that the Blue Ox Base Plate Kit #BX1739 would be a compatible fit for your 2020 GMC Sierra 3500 (diesel). If you haven't…
view full answer...We do not have any hub caps that fit trailer wheels. If you were wanting to go with something nicer looking you'd need to replace the wheel with something like the Westlake ST205/75-14 part #WST57FR or any of the other aluminum…
view full answer...If you don't see any bolts holding the existing jack onto the trailer frame, it might have been installed by welding it in place. If this is the case, you'd need to grind off the welds, which is something…
view full answer...Trailer Valet XL Trailer Dolly #TVXL25 will be able to move your trailer at the near 90 degree angle and up the incline of the driveway. The dolly has 2 gears and you will likely find that the low speed, 27 to 1 ratio will make it easier on you…
view full answer...To change the battery mode on the Progressive Dynamics 9300 Series RV Converter Charger #PD79RR you'll need to insert the included CLAW tool into the small opening next to the battery type indicator light. Press and hold that button…
view full answer...We actually carry several trailer dollies that have an automatic brake. The one most appropriate for your 2000 pound trailer is the Trailer Valet 5X Swivel Jack and Trailer Mover #STC-V211. The 5X has a 15 inch lift and is rated for 500 pounds. It…
view full answer...