Videos
for Tire Repair Tools
Help Articles
for Tire Repair Tools
Expert Answers
for Tire Repair Tools
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...The valve stem you'd want for a 16 inch trailer wheel is the part #AM20906. Most 16 inch trailer wheels have a .625 inch hole for the valve stem to fit which this valve stem works with but also this valve stem can be used with .453 inch…
view full answer...Hey Vaughn, thanks for reaching out! The max psi rating of the Americana Aluminum Mod Trailer Wheel #AM22646 will be the equivalent to the rating of the valve stem that you install on it. The Americana Metal, Bolt-In Valve Stem #AM20906 can handle…
view full answer...Wheel bolt patterns are defined by two numbers: the first being the number of lug nuts and the second being the diameter of the circle the lug nuts are arranged in. So a 5 on 4-1/2 bolt pattern is 5 lugs arranged in a circle that is 4-1/2 inches in…
view full answer...They sure are! The Aluminum Liger Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 - Black #LH49FR you were looking at have a load rating of 2830lbs which matches the load rating of the Karrier ST225/75R15 Radial Trailer Tire - Load Range…
view full answer...A ST205/75R14 trailer tire is going to have a diameter of about 26.3" and a width of 8.1" when inflated. If we go up to a 15", the ST205/75R15 tires are about 27.3" in diameter and 8.1" wide. So, they have…
view full answer...Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…
view full answer...Since wheels will be able to withstand the psi rating of any of the tires that are meant to fit it you will need to look at the valve stem as that is the deciding factor. If your valve stem has the rubber all the way up to the threads, like part…
view full answer...The Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel #AM22327 has a 0 offset and has a 14 inch diameter and is 5-1/2 wide. This wheel has a weight capacity of 1,900 pounds. If you have any further questions please feel free to reach back out to me…
view full answer...According to Cruisemaster, the DO35 can be used with load distribution hitches (WDH) providing the coupling movement is not obstructed and the maximum downward load of 350kg is not exceeded. Looking at their instructions you will have to get an…
view full answer...Hello Craig, that is a good question. I just ran this by my contact at Counteract and they were not able to give a specific minimum or maximum valve stem length in order to use the Counteract Filtered Tire Valve Core #CA38FR. They did say that this…
view full answer...Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…
view full answer...