Videos
for RV Skid Wheels
Help Articles
for RV Skid Wheels
Expert Answers
for RV Skid Wheels
Hello Gaby. I reached out to the manufacturer and found out that the UltraFab Weld-On Jumbo Steel Roller #UF48-979023 uses a 6-1.0mm Zerk fitting. For a replacement you can use the following: - Replacement Brass Grease Zerk for Weld-On Hinges - 6…
view full answer...For your application there really is only going to be a weld on solution that's reasonable like the part #UF48-979022 that you referenced. The frame dimensions are unknown so a weld solution would be better since that really doesn't…
view full answer...I do have an option for you but the Curt Trailer Hitch Receiver part #13390 on your 2015 Subaru Legacy already has the highest ground clearance (10-1/4") of any other trailer hitch receiver we have confirmed to fit your vehicle. This…
view full answer...From the sounds of your situation the Ultra-Fab Skid Wheels #UF48-979014 seem to be a great solution. Sure beats damaging your driveway. These are designed to attach to 2-1/2 inch square hitch tube on the motorhome. If you don't have this you…
view full answer...Skid wheels like the part #UF48-979021 that you referenced installed on the hitch and frame would be one solution to help prevent the dragging. While we don't have an air bag system we do have a lift kit part #RR23QX that will give you an…
view full answer...I certainly do. For this you are going to want to install skid wheels which will take some of the brunt off your trailer. For this I recommend using the Ultra-Fab Steel Jumbo Roller part #UF48-979023. These skid wheels will need to be welded on the…
view full answer...Another wire or harness is not needed on the 2023 Honda CR-V for the install of the Curt 4-Way Wiring Harness #C56370, but you do have to add 20 amp fuse to location #17 in the fuse box.
view full answer...The distance from the top of the mounting plate to the bottom of the wheel on the Ultra-Fab 4 Inch Skid Wheels, #UF48-979011, is 5-3/4 inches and for the 6 Inch wheels, #UF48-979013, 7-3/4 inches. I have attached a photo for you showing these…
view full answer...Adding skid wheels to your open car trailer is indeed what I recommend to help prevent the trailer from dragging when going up a steep driveway. These are designed specifically for this very purpose and will work well. I recommend taking a look at…
view full answer...I do have an option for you. Due to the length of your 5th wheel and size of your bumper, we do not have a bolt-on option available. That being said, you can use the Ultra-Fab Steel Jumbo Roller for Trailers and RVs #UF48-979023 which is a weld-on…
view full answer...The Roadmaster Rollaway Trailer Hitch Protector #RM-050 will likely work with your trailer hitch that has the tabs on the bottom of the receiver as there does not look like there is going to be any interference. So long as the tabs are completely on…
view full answer...Yes, you can use the Roof Rack Adapters item #TH490001 to attach the Thule HideAway Awning for Sprinter item #TH64WJ to an aftermarket roof rack. The only two major restrictions are the crossbars need to have a 36" spread and they can not be…
view full answer...