Filter Products
Filter by Transmitter
$26.73 - $54.02
Videos
for Home Weather Stations
Help Articles
for Home Weather Stations
Expert Answers
for Home Weather Stations
Because it's lighter, less expensive, has fewer moving parts and is mechanically less complicated I'd recommend going with the Gen-Y #325-GH-8040 shock absorbing pin box versus a Trailair Flex Air like part #LC328492. The Trailair…
view full answer...The closest compatible option for your Dometic DOTR12CB RV microwave's size is the Furrion Standard RV Microwave #FMSN09BL. It measures 19-1/16" W x 13-5/8" H x 15-7/8" D with a 0.9 cu ft capacity.
view full answer...I looked up your discontinued Dometic DOTR12CBIV and was able to find that it measures 16-1/8" tall x 22" wide x 16-5/8" deep so the closest replacement option we have is the Greystone Standard RV Microwave w/ Trim Kit…
view full answer...Yes, it is normal for the Gen-Y Glyder Shock Absorbing Ball Mount #325-GH-12001 to slope down when loaded. This particular hitch is rated for trailers up to 7,000lbs with an optimal tongue weight of 400-700lbs. There is no adjustment available for…
view full answer...Yes, for the white version of the MaxxFan Deluxe Roof Vent with 12 volt fan, thermostat, remote and powered lift we have the part #MA00-07000K which is exactly what you need.
view full answer...The Lippert Solid Stance RV Step Support Kit #LC96BJ will fit Lippert double and triple manual folding steps, and in regards to how it will fit, what you will need to do is check the space you have under your double step. You will need to have at…
view full answer...The portion you need to measure is not the cap, but the the hub bore. Remove the grease caps and measure the diameter of the opening the caps occupy. This is the hub bore. You will need an accurate measuring devices like a set of dial calipers that…
view full answer...I have a solution for you, but the main issue with puck style lights that mount to the surface of your RV ceiling or under cabinets, is that there aren't replacement bulbs available and they aren't really designed to have the bulbs replaced.…
view full answer...If you check out the picture I attached you'll see the mounting holes and dimensions for the Optronics LED RV Exterior Light #UCL41CB.
view full answer...I have a solution for you, but the Optronics LED RV Exterior Scene Light #UCL41CB is designed to work on 12v power only, so it's not going to work on a 110v/120v feed. Unfortunately all of the lights we've got for this application are going…
view full answer...There really isn't going to be a "typical" size for an oval exterior light, but if your light is overall 4.33" long and has 3.75" between the mounting holes then this light will work for you.
view full answer...The wiring for the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision #FOS05TASF can simply be spliced into the running light wiring. You can remove strip back the casing and twist the bare wires of the #FOS05TASF and the running…
view full answer...