Filter Products
Filter Results
$153.25 - $153.25
$99.94 - $214.44
Filter by Coupler Size Compatibility
$153.25 - $153.25
$99.94 - $214.44
Videos
for Flat Mount Trailer Coupler
Help Articles
for Flat Mount Trailer Coupler
Expert Answers
for Flat Mount Trailer Coupler
Hi Michael, While we don't have any way of knowing what winch stand goes on any specific trailer, it is possible we have an option for a winch stand for your Karavan trailer. The only option we have for a stand is the CE Smith Winch Stand…
view full answer...The E-Track has slots that have a length of 2.45-inches and a width of .58 inches. See attached diagram.
view full answer...Yes, you will need to replace the spring with something like Item #e74SR. It is best to replace all springs at the same time so that you have even support and maintenance for the trailer. We do not carry 2 inch never fail bushings. I contacted…
view full answer...The Curt Class III trailer hitch #C13119 does have a 350-lb tongue weight (TW) rating as you noted, and that capacity must be enough for the weight of the bike rack itself plus that of your loaded bikes. A substantial 4-bike rack like the Hollywood…
view full answer...I have a solution for carrying 3 bikes with your 2016 Mazda 3 hatch back but the Class I hitch can't handle carrying more than 2 bikes due to the added weight and leverage of the third bike that stick out further. You'd instead need a 2 inch…
view full answer...The expert reply you were looking at is correct. The only way to confirm if your 2019 Acura RDX has the plus 12 volt power provision is by removing the interior trim and seeing if the factory connector has one or two red wires. I can completely…
view full answer...The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...From what I could find on the Jensen DV2011 it is a single DIN RV stereo. We have the Jensen RV Stereo #JWM70A which is also a single DIN style. The Jensen RV Stereo #JWM70A plays audio from radio signals, CDs, DVDs, and devices connected through…
view full answer...Yes, the Timbken bearings part #TMK73VR and #TMK23VR are made in the USA.
view full answer...We do have what you need to replace the UFP HD-1377-10 hub and drum as well as add hydraulic brakes for your boat trailer. Here are the exact parts you will need: - Dexter Trailer Hub and Drum Assembly #84546UC3 - Hydraulic Trailer Brake Kit -…
view full answer...I don't have the length of the spring bar arms on the Blue Ox 2-Point Weight Distribution System like part #BLU75FR but I can tell you that the frame brackets will need to be installed between 25-27" back on the frame from the center of the…
view full answer...I spoke to Dexter and they said there is a bit of a process for installing the spindle nut properly. 1. You will need to thread on the inner nut, rotate the hub, then tighten the nut to 100 foot pounds. 2. Loosen the nut to remove the torque, making…
view full answer...