Recommendation To Replace Slipper Spring And Bushings
Question:
I'm in the process of building a car trailer from an old stock trailer and it has slipper springs on the axle and one spring eye is egg shaped from the bushing being gone and the other spring eye is good granted bushing is shot. My question is I'm assuming that spring will need to be replaced with a new one. And my second question is about your never fail spring bushings it shows on your website that you only have 1 3/4 inch length bushings and the springs I have are 2 inches wide. Do they make 2 inch wide never fail bushings? My last question is I have 6 bolt hubs and I was wondering if I could use them on my new axles if the axle shaft and bearing numbers match up perfectly.
asked by: Dale A
Expert Reply:
Yes, you will need to replace the spring with something like Item # e74SR. It is best to replace all springs at the same time so that you have even support and maintenance for the trailer. We do not carry 2 inch never fail bushings. I contacted Lippert Components who manufactures never fail bushings and they do not have a 2 inch option available at this time.
It also sounds like you have a new axle. Your hubs and axle shaft/spindle should work together so long as the bearing numbers and seals match. No matter what, everything needs to fit together to work.
Please let me know if I can do anything else to help.
Product Page this Question was Asked From
5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Hook End
- 7000 lbs
- 2 Inch Wide
- 5 Leaf
- 26-5/8 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Search Results: slipper spring hardware
- Search Results: 2 dust cap
- Search Results: slipper spring kit
- Shop: Shackle Bolt For Double-Eye Springs - 1/2" Diameter - Plain - 3" Long
- Shop: Spring-Eye Bolt for Slipper Springs - 5-1/2" Long
- Shop: 2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Q&A: Recommended Trailer Tongue Size for use with Channel Tongue Trailer Coupler # CT-3001-Z
- Video: ABS Fasteners Double-Eye Springs Shackle Bolt Installation
- Shop: Shackle Bolt For Double-Eye Springs - 9/16" Diameter - Plain - 3" Long
- Shop: Nylon Bushing - 9/16" Inner Diameter, 1.024" Outer Diameter - 1-3/4" Long
- Search Results: leaf spring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Article: Most Popular Wheel Bearings
- Search Results: equalizer
- Q&A: How to Determine Weight Capacity of Trailer Axle
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Article: Trailer Tire Sizing
- Shop: Suspension Enhancement
- Search Results: 25580
- Article: How to Accurately Measure Trailer Leaf Springs
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: How to Pick Out Correct Shackle Length for Trailer Suspension
- Search Results: bearing buddy
- Shop: Brake Controller
- Q&A: How to Measure Trailer Leaf Spring to Find Correct Replacement