Filter Products
Filter by Type of Air Box
$402.95 - $402.95
Videos
for Cold Air Intakes
Help Articles
for Cold Air Intakes
Expert Answers
for Cold Air Intakes
I don't blame you for not being enthused about drilling to mount a hitch on your 2005 Honda Element, though that will be necessary with both of the hitches we offer that fit, the etrailer Trailer Hitch Receiver #e78KR and Curt Trailer Hitch…
view full answer...I have a solution for you that I can provide, but we aren't going to have a custom fit hitch to fit a vehicle like what you referenced. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service…
view full answer...Yes, you could use the Rola Haul-Your-Might T3 Truck Bed Ladder Rack #59799 along with two Thule Hullavators #TH898 on your 2023 Toyota Tacoma. You won't need to add in crossmembers but you will need to space the towers 24" to 28-1/2"…
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
view full answer...I would be happy to help! To add a 3rd axle you will need to start with a new hanger kit of which I recommend the Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center #APTT5. This will work perfectly with the Lippert…
view full answer...When going from a tandem axle trailer to a triple axle trailer you want to install the center axle where the current center hanger is for your tandem setup. This means you have to remove both of your current axles to position them properly. This…
view full answer...The Triple-Axle Trailer Hanger Kit #APTT3 that you referenced is designed to work on axles with capacities of 2,000 lbs to 7,000 lbs so it should work very well for you. I attached a picture that has a chart that shows exactly how you should space…
view full answer...There will be different dimensions between the hangers. From front to back your hangers for that 20-3/8 inch spring like #e84SR will be 24-3/4 on center then 29 inches on center and finally 24-3/4 inches on center. This will put each of the 3 axles…
view full answer...Trailer manufacturers don't usually keep a record of parts like these that they install at the factory, so I cannot be sure as to the exact length of the shackle strap that would have come originally on your trailer. With this in mind, a 3-1/8…
view full answer...The first thing I would check on your trailer is the capacity of the springs. You need to be sure the spring capacity is rated at 1/2 the axle capacity. That way 2 springs equal the capacity of the trailer axle for proper fit. Check the arch of the…
view full answer...The Blue Ox SwayPro Weight Distribution System, part #BXW2000 we carry is designed for a 2-1/2 inch trailer hitch. We do not offer it with a 2-inch option, because using a 2-inch shank would lower the weight capacity of the system. The highest rated…
view full answer...The correct replacement for a Kwikee Step Motor 369545 is the Replacement Motor for Kwikee Electric RV Steps part #LC379147.
view full answer...