Filter Products
Filter by Mounting Style
$28.27 - $38.42
Videos
for Boat Mirrors
Help Articles
for Boat Mirrors
Expert Answers
for Boat Mirrors
It is recommended to cover all of the exposed wood. When the wood is exposed there is a greater risk of rot and damage. The carpeting is made of breathable polyester which makes sure it can dry out so no mold will build up and damage the wood or…
view full answer...Since your Kwikee 32 series step was made before 1999 you'll need the upgrade kit part #LC379145 to replace the motor and other components needed. This comes with more than just the motor but the motor design has since changed so the…
view full answer...I checked with Torklift and for your 2023 Toyota Tundra we have the part #TL37CR for rear tie downs and part #TL57CR for the front.
view full answer...You can use the RV Propane Gas Detector #RS64FR to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.
view full answer...The RV Propane Gas Detector, #RS64FR should be installed in the horizontal orientation. This comes with two mounting bracket options to help cover over holes such as you describe. These options are 7-1/4" long x 3-3/8" wide or the…
view full answer...Yes, 12 inches is the maximum extension on the bottom portion of the CE Smith Post-Style Guide-Ons for Boat Trailers such as part #CE27620.
view full answer...The Dexter DX7.5L A-60 Brake Actuator part #DX89FR for disc or part #DX33FR for drum will work to replace both a UFP A-60 or A-75 Brake Actuator so there will be no worried here. The A-60 is rated for 6K and the A-75 is rated for 7.5K. The Dexter…
view full answer...Please refer to the linked FAQ article that concerns converting from drum to electric-over-hydraulic disc brakes. This explains all the components required. I have also attached a link that will take you directly to some examples of the disc brake…
view full answer...Yes the kit you need is the part #T10HREKITBB that you referenced which you'd need two sets of since you have a tandem axle trailer. This does come with the correct bearings and seal too which would be all that you'd need.
view full answer...For just a replacement tire, we do have the Kenda Loadstar K364 Trailer Tire #AM10040. This 6.90/6.00-9 size tire will be the exact same size as what you currently have mounted, however we do not currently carry the 9 inch wheels that these will…
view full answer...The closest standard trailer tire size to 22 inches overall is the 5.30-12 which has an overall diameter of 21.9 inches. This tire size there are only bias ply tires available like the part #AM30780 for if you have a 4 on 4 inch bolt patter or the…
view full answer...The 6.90/6.00-9 tire size is the same as your 6.00-9 tire size. Trailer tire sizing went through a change in the way the sizes are listed, and the 6.90/6.00-9 size lists both the newer and older sizes in order to indicate that the tire will work as a…
view full answer...