The longest folding ramps we have for you is the Arched Loading Ramp Set part #288-07432 for 1 or part #288-07432-2 for 2 which are 90" long. The 90" length will ensure the angle that will be…

What will help prevent the bottoming out is a ramp set that is longer and has a bit of an upward bow like the #288-07489 has. Without knowing the length of your current ramps I can't say if these would be an improvement…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…

When it comes to installing The Timbren Rear Suspension Enhancement System #TFRRGR on your 2020 Ford Ranger they come in a pair. The Timbren springs has a 6,000 pound weight capacity, and no drilling is required during the installation. I attached…

Yes, the Curt Custom Base Plate Kit #C36JR is confirmed to fit your 2020 Ford Expedition 4wd. It will also allow for you to use a Blue Ox Tow Bar #BX7420. Do ensure you install a Charge Line Kit #RM-156-25 as the battery will while being flat towed…

Mad-Ramps states that the part #MR54FR is best suited for ATVs/UTVs with one row of seats but if the width of your golf cart is less than 60 inches and the wheel base is less than 88 inches this would work for you.

The ramp set part #288-07489 that you referenced has a combined weight capacity of 3,000 lbs for both. Individually each has a 1,500 lb capacity and each ramp has three prongs that lean on the trailer. So each of them is rated for 500 lbs…

Yes you can just swap out the bars on your Equal-i-zer Weight Distribution System w/ 4-Point Sway Control #EQ64FR with the Replacement Spring Bar for Equal-i-zer Weight Distribution Systems #EQ90-02-1499.

We have ramps that will work perfectly for loading your 1690lb UTV into the bed of your truck. I recommend the Arched Loading Ramp Set #288-07432-2 which is 90" long x 18" wide and has a combined…

For most golf carts you want to go with a 1,000 lb capacity loading ramp. I would however recommend the Erickson Arched Ramps part #EM07486 as they have a 3,000 lb capacity, an aluminum construction which will make them lightweight, and straps that…

I reached out to Mad Ramps about the MAD-MOUNT Wall Mount Brackets for Mad-Ramps Pivoting ATV/UTV Ramps part #MR27DR and they informed me that the brackets are both 36" long x 2-1/2" tall. I have…

The Stallion #288-07432-2 folding cargo ramps are manufactured in China. If you'd prefer a US made alternative, I'd recommend the Gen-Y #325-GH-R84 84 inch long aluminum loading ramps. If you click the…