Catalytic Converters Specs:
Features:
MagnaFlow ceramic catalysts have large surface areas to speed up the exhaust breakdown process while a ribbed body and external shield offer protection. Vehicle specific design with mandrel bent tubes increase air flow. Not CARB compliant.
More Information >Catalytic Converters Specs:
Features:
This catalytic converter kit is engineered to speed up exhaust breakdown and uses mandrel-bent tubes to boost airflow through your vehicle's exhaust system. As a result, horsepower and torque are increased. Not CARB compliant.
More Information >Catalytic Converters Specs:
Features:
MagnaFlow ceramic catalysts have large surface areas to speed up the exhaust breakdown process while a ribbed, stainless steel body and external shield further protect them. Universal design. Not CARB compliant.
More Information >Videos
for Catalytic Converters
Help Articles
for Catalytic Converters
Expert Answers
for Catalytic Converters
There could be a number of causes as to why your Everchill RV Refrigerator w/ Freezer #324-000119 is malfunctioning. I would start by removing the fuse to fully cut the power and waiting a few minutes for the unit to fully reset. If resetting the…
view full answer...For the Everchill refrigerator part #WAY44FR there is an electronic display that allows you to adjust the temperature of the fridge and freezer. I attached a picture that shows what it looks like for you to check out and see how the adjustments are…
view full answer...Lippert Components purchased the Everchill line so we finally have some manufacturer support for the Everchill RV Refrigerator w/ Freezer Drawer #WAY44FR.…
view full answer...The clip that you are referring to that holds the 7-way plug to the socket is typically found on the connector which is why the #HM40940 does not come with it. I wish we sold that piece by itself but only way to get it is to go with a new harness…
view full answer...From what I have found, the ALKO hub and drum assembly you have is for 7,000 lb axles. I believe the Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles -…
view full answer...If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…
view full answer...Since you already have a factory 4-way flat on your 1996 Ford F-350 you will need the Adapter 4-Pole to 7-Pole #37185. This will plug into your factory 4-way and the rest of the wiring will have to be spliced into your factory wiring as I do not…
view full answer...We only have the #TRSL350 for a shackle that is 3-1/2 inches long from hole center to hole center. Typically these…
view full answer...The Shackle Strap part #TRSL350 comes as a single strap. There should be 2 shackle straps per spring on a single axle trailer. You would need to order 4 of the part #TRSL350 for a single axle.
view full answer...The Inno Box 2020 Rooftop Cargo Box #IN86FR will fit as long as you have the required…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...To flat tow your 2010 Chevy Silverado 1500 you will need to first start with a base plate kit. For that the most popular option is the Roadmaster #3154-3. In addition to the base plates, you will also need a compatible tow bar, safety cables,…
view full answer...Filter Products (6)