Code: C51170-C51515
Trailer Brake Controller Specs:
Features:
Mount the control knob of this proportional brake controller on your dash for a from-the-factory look, and install the main unit out of sight behind the dash in any position or angle. Adhesive backing gives you the option of a drill-free install.
Installation Notes:
You need item ETBC7 ($128.85) to install your controller.
You may also need a 4-Flat connector to complete your wiring.
More Information >Code: C51170-C51322
Trailer Brake Controller Specs:
Features:
Mount the control knob of this proportional brake controller on your dash for a from-the-factory look, and install the main unit out of sight behind the dash in any position or angle. Adhesive backing gives you the option of a drill-free install.
Installation Notes:
You will also need item 37185 ($55.30) to complete your wiring.
The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.
More Information >Code: C51170-C51322
Trailer Brake Controller Specs:
Features:
Mount the control knob of this proportional brake controller on your dash for a from-the-factory look, and install the main unit out of sight behind the dash in any position or angle. Adhesive backing gives you the option of a drill-free install.
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Code: C24VV-C51322
Trailer Brake Controller Specs:
Features:
...separately) if you don't already have a 7-way plug at the back of your vehicle. Proportional Braking The Curt TriFlex NEXT brake controller comes equipped with proportional braking to give you the b...
Installation Notes:
You will also need item 37185 ($55.30) to complete your wiring.
The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.
More Information >Code: C24VV-C51322
Trailer Brake Controller Specs:
Features:
...separately) if you don't already have a 7-way plug at the back of your vehicle. Proportional Braking The Curt TriFlex NEXT brake controller comes equipped with proportional braking to give you the b...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Code: C74VV-C51322
Trailer Brake Controller Specs:
Features:
...control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle. Time-Delayed Braking The Curt Venturer NEXT comes equipped with time-dela...
Installation Notes:
You will also need item 37185 ($55.30) to complete your wiring.
The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.
More Information >Code: C74VV-C51322
Trailer Brake Controller Specs:
Features:
...control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle. Time-Delayed Braking The Curt Venturer NEXT comes equipped with time-dela...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Trailer Brake Controller Specs:
Features:
...Auto. The Curt Echo In-Line is all about simple use and easy install. With the main unit connected at your 7-way, all you need is your smartphone to control the settings on the brake controller. You...
Installation Notes:
More Information >Trailer Brake Controller Specs:
Features:
...Auto. The Curt Echo In-Line is all about simple use and easy install. With the main unit connected at your 7-way, all you need is your smartphone to control the settings on the brake controller. You...
Installation Notes:
You will also need item 37185 ($55.30) to complete your wiring.
More Information >Code: C27JR-C51322
Trailer Brake Controller Specs:
Features:
...but will not interfere, with Apple CarPlay or Android Auto. The Curt Echo under-dash is all about simple use and easy install. With the main unit mounted out of sight beneath the dash, all you need is your smartphone...
Installation Notes:
You will also need item 37185 ($55.30) to complete your wiring.
The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.
More Information >Code: C27JR-C51515
Trailer Brake Controller Specs:
Features:
...but will not interfere, with Apple CarPlay or Android Auto. The Curt Echo under-dash is all about simple use and easy install. With the main unit mounted out of sight beneath the dash, all you need is your smartphone...
Installation Notes:
You need item ETBC7 ($128.85) to install your controller.
You may also need a 4-Flat connector to complete your wiring.
More Information >Code: C27JR-C51322
Trailer Brake Controller Specs:
Features:
...but will not interfere, with Apple CarPlay or Android Auto. The Curt Echo under-dash is all about simple use and easy install. With the main unit mounted out of sight beneath the dash, all you need is your smartphone...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Code: C84VV-C51322
Trailer Brake Controller Specs:
Features:
...don't already have a 7-way plug at the back of your vehicle. Time-Delayed Braking The Curt Discovery comes equipped with time-delayed braking. Every time you apply the brakes in your vehicle, a sig...
Installation Notes:
You will also need item 37185 ($55.30) to complete your wiring.
The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.
More Information >Code: C84VV-C51322
Trailer Brake Controller Specs:
Features:
...don't already have a 7-way plug at the back of your vehicle. Time-Delayed Braking The Curt Discovery comes equipped with time-delayed braking. Every time you apply the brakes in your vehicle, a sig...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Videos
for Trailer Brake Controller
Help Articles
for Trailer Brake Controller
Expert Answers
for Trailer Brake Controller
Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…
view full answer...If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...Hey Jeremy, Typically with boat trailers the manufacturer will install hydraulic surge brakes because you…
view full answer...All the brake controller needs to sense a trailer connection so that you can test it is a slight amperage draw on the output circuit. For that you can use a circuit tester like the part #PTW2993 with one pin grounded and the other on the output…
view full answer...For your 2024 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. I like the Liberty because it is simple, reliable, and looks great in any vehicle. The main unit installs behind the dash, so only the control knob will…
view full answer...For your 2024 Chevy Silverado 1500 I recommend the Redarc Tow Pro Elite #RED63RR. You can use it along with the Plug in Adapter #3064-P for a plug and play install, since you already have the factory tow package. The Redarc controller is going to…
view full answer...The P3 brake controller, #90195, will go into a sort of sleep mode after it detects no movement for 15 minutes. While it is on it does not draw very much power. What you can do to make sure it goes to sleep is exit the truck after turning it off,…
view full answer...You are correct, you should only be getting output when the brake is applied, or the override switch is activated. It sounds like the controller might be bad, but to make sure, you should probably bench test it before tossing it. Use a circuit…
view full answer...A factory 7-way trailer connector…
view full answer...Filter Products (28)
Contact and Help
What our customers are saying:
Easy place to shop. Fast delivery and great products. Very happy with my purchase.
Ed
Boynton Beach, FL