bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about BMW X5


  • Parts Needed to Install Brake Controller on 2017 BMW X5
  • In order to install a brake controller on your BMW X5, you really just need the brake controller, since you've already got a factory 7 way plug. The caveat here is that your BMW does not have a plug in adapter available to install a brake controller, so installation of a brake controller would require hardwiring into the vehicle's wiring. If you've already got a brake controller, you will need to look under the dash to find the 12v power from the battery, the brake control wire from the...
    view full answer...

  • Recommended Hitch and Wiring Harnesses for a 2015 BMW X5
  • I would be happy to help you set up your 2015 BMW X5 for towing. You're going to need a hitch, a couple wiring harnesses, brake controller, and a ball mount with a ball. For your hitch I recommend the EcoHitch Stealth Trailer Hitch Receiver item # EH44FR. This hitch is custom fit and bolts directly to your BMW with included hardware. The best feature about this hitch is that the receiver portion is completely removable. When you're not towing your trailer you can unbolt the receiver and...
    view full answer...

  • Parts Needed to Install a Prodigy P2 Trailer Brake Controller On a 2017 BMW X5
  • To install the Tekonsha Prodigy P2 Trailer Brake Controller # 90885 on your 2017 BMW X5 you will need the Roadmaster Universal Stop Light Switch Kit # RM-751000. The will allow you to gain a signal wire when the brake pedal is pushed without tapping into the delicate wiring on your brake switch. You will then be able to run the Blue Wire # 10-1-1 from your brake controller to the 7-Way you have installed. Additional wiring and fuse will be needed depending on where you plan to pull power...
    view full answer...

  • Stealth Hitch and Trailer Wiring Harness for 2020 BMW X5 M50i X-drive
  • The # SH64MR Stealth Hitch you'd looked at is a fit for your 2020 BMW X5 if it's an M Performance model. If you have the M Sport model, you'd want to use # SH89VR instead. The receiver included with either hitch is designed for carrying hitch mounted accessories only, and isn't designed to tow a trailer. To tow a trailer, you'll need the # SH58VR towing kit which includes the ball mount and the trailer wiring harness assembly. The towing kit is compatible with all models of the 2020 BMW...
    view full answer...

  • Parts Needed to Install an Electric Brake Controller on a 2017 BMW X5
  • I can help you find what you need to get it installed but there isn't a direct plug-in wiring adapter for the Prodigy P2 # 90885 that's confirmed to fit your 2017 BMW X5. You can install a 4-way trailer connector on the back of your X5. Use # 119250KIT for this. It needs to be hardwired into the BMW's wiring. Then use our # ETBC7 kit to convert the 4-way to a 7-way. This kit also includes everything you need to install the P2. However, finding the wiring under the dash for the P2...
    view full answer...

  • Is a Stabilizing Strap Required on a Hitch for 2018 BMW X5
  • On the Curt Trailer Hitch Receiver # 13077 for your 2018 BMW X5 there is no requirement for the Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories # 18050. The strap is recommended for use with bike racks and other hitch-mounted accessories to avoid putting too much strain on your trailer hitch. Some Class I and Class II 1-1/4" hitches may require that you use a stabilizing strap to ensure that the hitch does not experience excessive torque while transporting your gear but...
    view full answer...

  • Parts Needed to Use 2-5/16" Hitch Ball with Curt C45059 Adjustable Shank
  • I have a solution for you, but the Curt # C45059 has a slightly different hole orientation than a typical weight distribution shank. For this reason, you would only be able to use the parts designed to work with this Curt shank-you will need to use the Curt Multi-Ball Adjustable Ball Mount # C45802 and Replacement Tri-Ball for CURT Adjustable Ball Mount # C45800 to give yourself a complete adjustable ball mount. This would be the only available solution for that shank since it was designed...
    view full answer...

  • Parts Needed to Tow Trailer With Brakes on 2017 BMW X5 and Add Weight Distribution Hitch
  • To start, if you don't already have a 4 way wiring harness on your X5 you'll need that first, I recommend using the Curt # C56190KIT since it's a plug and play solution, and Curt wiring is one of the most reliable solutions. Then, I recommend using the # ETBC7L to install a 7 way connector on your 2017 BMW X5, which will give you a 7 way connector that can be used with wireless brake controllers. I recommend using this instead of the # ETBC7 because your 2017 BMW X5 isn't going to have...
    view full answer...

  • Installation Process On Hidden Hitch For A 2023 BMW X5 With M Sport Package
  • Firstly congratulations on the purchase of your new 2023 BMW X5 with M Sport Package. When it comes to installing a hidden trailer hitch onto your vehicle I would recommend The Stealth Hitch # SH25VR. After installation this trailer hitch has a completely hidden design, that will give it a clean, from-the-factory look and it will not affect the ground clearance or block your trunk's foot-access sensor. The Stealth hitch requires no drilling for installation, but it does require temporary...
    view full answer...

  • Will The Stealth Hitches Allow For Towing a Car With a 2020 BMW X5 M Competition?
  • The Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit # SH22MR is rated for towing up to 6,000lbs with 600lbs of tongue weight. You will need to confirm the towing capacity of your 2020 BMW X5 M Competition with your BMW dealer to determine the vehicles towing capacity and if it is enough for your specific car and trailer. For a brake controller I recommend Redarc Tow-Pro Liberty Brake Controller # RED52VR. This has a small dash mounted control knob which provides a clean appearance....
    view full answer...

  • Using an Electric Trailer Brake Controller With Boat Trailer Hydraulic Brakes
  • The 2012 BMW X5 has a rated towing capacity of 6000-lbs according to my research and for this vehicle we offer several Class III hitches (viewable on the link provided) that share this same maximum towing capacity, along with a tongue weight limit of 600-lbs. Note that these hitches do not fit the M model. You'll want to be sure that your fully-loaded boat/trailer does not exceed the towing or tongue weight capacities of either the vehicle or the hitch (your hitch should have a sticker...
    view full answer...

  • Adding a 7-Way Trailer Connector on a 2013 BMW X5 to Power Trailer Brakes
  • The easiest way to add a 7-way trailer connector to your 2013 BMW X5 is to start with a 4-way and then convert it to a 7-way. For wiring, use the ZCI kit, part # 119250KIT, instead. The ZCI sensors that clamp to your X5's wiring to detect the current flowing through the wires instead of being spliced in. This way you don't have to cut into the BMW's wiring. I've linked a video of this harness being installed on an X5 similar to yours. Then once you have the 4-way installed use our...
    view full answer...

  • Recommended Trailer Hitch and Wiring Harness for 2017 BMW X5
  • We do have wiring harnesses for the 2017 BMW X5 diesel to go with a hitch like the Curt # 13077. If you wanted everything in a complete package that includes the hitch, wiring, ball mount for towing and a receiver that can be used to carry hitch mounted accessories, the Stealth Hitches # SH85VR is a great choice and one of our most popular options for luxury vehicles like your 2017 BMW X5. This kit also comes with 7 way wiring. If you want to piece a system together, in order add a functioning...
    view full answer...

  • Recommended Trailer Hitch for 2018 BMW X6
  • I have a solution for you, but the EcoHitch # EH44FR is designed to fit on the 2018 BMW X5 and not the X6 For the 2018 BMW X6 you'll want to use the Curt # 13077, which also has a concealed cross tube design like the EcoHitch. If you're going to be towing with this hitch, you'll need also need a wiring harness, ball mount and hitch ball. For the wiring harness I recommend using the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT...
    view full answer...

  • Trouble Shooting Trailer Wiring Harness On A 2017 BMW X5 Right Turn/Brake Light Not Working
  • With The Curt Powered Tail Light Converter Kit # C56190KIT having zero output to the right side turn/brake lights it sounds like you have a bad ground. Make sure the ground is attached to a clean and corrosion free bare metal surface. You should also check out the main trailer connector ground and the pins on the vehicle and the trailer side 4-way connectors and make sure they're clean and free of corrosion. There could also be something on the vehicle side wiring. The Hook Probe Circuit...
    view full answer...

  • Is the Yakima HoldUp EVO Bike Carrier Compatible with Yakima SKS Lock Cores
  • Yes. The Yakima HoldUp EVO # Y02480 is compatible with Yakima SKS Lock Cores. This rack does come with a locking hitch pin and cable lock that can be swapped out to match your other Yakima products If you don't already have Yakima lock cores, the 2-lock kit is part # Y07202, the 4 lock kit is part # Y07204, the 6 lock kit is part # Y07206 and the 8 lock kit is part # Y07208. All SKS lock kits include the control key for core installation as well as the lock-specific keys to fit the cores.
    view full answer...

  • Does Stealth Hitches Trailer Hitch For A 2023 BMW X5 Require Bumper Trimming
  • When installing The Stealth Hitch # SH89VR onto your 2023 BMW X5 there is no type of fascia or bumper trimming needed in order to install it. The bumper and fascia will remain intact, but there is a small piece that is underneath your vehicle that you will need to trim. The rock/gravel guard that is located underneath your BMW will need a portion of it trimmed in order to install the hitch. I will attach a picture below with a red arrow pointing to what needs to be trimmed. Ignore the yellow...
    view full answer...

  • Recommended Trailer Towing Setup for 2018 BMW X5
  • The hitch I recommend for your 2018 BMW X5 is the USA-made Curt Class III model # 13077. I like this hitch because it offers the highest available weight rating of 600-lbs tongue weight and 6000-lbs towing weight. A small ultra-light teardrop trailer will be well within the X5's maximum towing capacity of 5952-lbs. I linked both the written instructions and an install video to show you the process. All required hitch hardware is included. For a 4-pole flat type wiring harness to power...
    view full answer...

  • Which Concealed Trailer Hitch for 2018 BMW X5
  • Both hitches fit certain models of the 2018 BMW X5. The EcoHitch # EH44FR will fit 2018 BMW X5 models, with the exception of M performance models (will fit M sport model) that have a rear back up sensor. The EcoHitch # 306-X7265 fits 2018 X5 models without the backup sensors, except M performance models. The Stealth Hitch # SH79VR hitch you'd looked at fits all models except the M performance. For the M performance, you'd use # SH56VR. Both hitch include the receiver that's meant to...
    view full answer...

  • Does Draw-Tite Hitch 75600 for 2011 BMW X5 Include Push Rivets for Plastic Wheel Well Molding
  • For installation of Draw-Tite hitch # 75600 on your 2011 BMW X5 you will not be able to use the included plastic push rivets that come with the hitch. These works on model years up to 2010 but for the 2011 model year your local BMW dealer will have the push rivets to fit the plastic wheel well molding.
    view full answer...