Does 2019 BMW X5 Use Same Trailer Hitch as 2017 Model
Question:
can I use the same hitch on both a 2017 and 2019 X5, not M package was looking at code 13077 Curt Class III
asked by: Mike M
Expert Reply:
Since the 2017 and 2019 BMW X5 are from 2 different generations, unfortunately there are enough differences between the 2017 and 2019 model years that a hitch from the 2017 model year wouldn't fit on a 2019.
The Curt # 13077 is indeed a fit for the 2017 model, but they don't offer one for the 2019. For the 2019, you'd use the Draw-Tite # 76288.
If you'll be towing with the hitch, you'll need a trailer wiring harness, a ball mount and a trailer ball. For wiring, I'd recommend the # 119250KIT. For the rest, go with the # 989900 ball mount kit, which includes 2 ball mounts, a 1-7/8 and a 2 inch ball and 2 hitch pins.
I've linked to an installation video for the wiring harness. The video shows the install on a 2012 model, so the wire colors would likely be different on a 2019 model, but the video should still be helpful in that it runs down how to test for wire function.
Products Referenced in This Question
ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- Tekonsha
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 720 lbs TW
- 7200 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 6000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Comparing etrailer and Draw-Tite Trailer Hitch Receivers For a 2024 Subaru Forester
- Article: Trailer Maintenance Schedule
- Q&A: Does The Curt SecureLatch Lunette Ring CU49FR Come With Hardware? What Kind Of Bolts?
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Will Curt Trailer Hitch Fit a 2017 BMW X5 with M Sport Package
- Q&A: Can a 5.30-12 Size Tire be Replaced with a ST145/R12 Size Tire
- Q&A: Slide Topper Recommendation for Box Width of 90.5 Inches on Gulf Stream Vintage 23BHS
- Q&A: Removing Rear Bumper Fascia from a 2012 BMW X5 For Draw-Tite Trailer Hitch Installation
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Article: Trailer Wiring Diagrams
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Measure Your Trailer Wheel Bolt Pattern