The Edge Jammer Cold Air Intake with Pre-Oiled Air Filter part # EP38225 is designed to fit a 1994-2002 Dodge Ram with the 5.9l turbocharged diesel engine. As the Banks exhaust brake works to compress the exhaust gasses (hot side) not the intake flow (cold side), it should have no compatibility issues with the Edge cold air intake as long as your turbocharger remains in the factory location. Therefore, yes, the Edge cold air intake will work with the Banks exhaust brake.
This is a great... view full answer...
For your 2017 Ford F-150 with the 5.0L coyote engine, I recommend taking a look at the Airaid MXP Cold Air Intake System part # AR401-293. The Airaid intake improves airflow to the engine which results in a power increase up to 19 HP and 26 TQ. The enclosed air box blocks out heat from the engine to maximize cold air draw.
In addition to improved airflow, the dry 2-layer filter works to prevent 99.6% of contaminants from entering the engine. The intake easily installs using the factory... view full answer...
When upgraded parts people will usually upgrade headers along with adding cold air intake but you do not have to upgrade headers to be able to install just cold air intake. So in other words you can install just cold air intake # AR200-247 if you want.
This particular model will fit your 2006 Chevy Silverado with 6.0 liter motor as long as it has a belt-driven radiator fan. For models with electric fans use # AR200-251.
The filter will need to be cleaned periodically so I recommend Airaid... view full answer...
Yes. I checked with Airaid and cold air intake # AR201-235 for the 2009 Chevy Silverado is street legal in all US states. So the CARB standards won't affect this particular part or its use. Cold air intake makes the engine more efficient so it makes sense that CARB would not be a factor! view full answer...
The correct Airaid Cold Air Intake System for a 2007 Chevrolet Suburban with 5.3L is part # AR201-267 which I confirmed with Airaid but only if you have electric radiator cooling fans. If you do not have electric radiator cooling fans then you could use the Airaid CAD Cold Air Intake System with SynthaMax Dry Filter part # AR201-196 but this is your only option as they don't offer a full system for models without the electric radiator cooling fans. view full answer...
The Airaid PowerAid Custom Throttle Body Spacer # AR450-638 that you referenced should work just fine with the cold air intake system you have installed on your 2011 Ford Mustang. It will add about an inch to your intake track length which your cold air kit shouldn't have a problem accommodating.
Running two throttle body spacers would be a bit redundant and would greatly increase the chance of experiencing a fit issue so I can't recommend you go that route. view full answer...
The Airaid CAD Cold Air Intake System # AR401-226 will fit a 2010 Ford F-150 with 4.6L V8 Engine. Since that is what you have this system will work for you. I have also included a link to all of the cold air intakes we carry that will fit your 2010 Ford F-150 with 4.6 liter motor. The intakes will fit both the 2-valve and 3-valve versions of the 4.6. view full answer...
The Edge Gas Evolution CTS2 Performance Tuner part # EP85450 can be installed on your 2016 Ford F-150 without supporting modifications. However, in order to receive the full benefit of the tuner, I recommend adding a cold air intake such as the Airaid MXP Cold Air Intake System with SynthaFlow Oiled Filter part # AR400-293.
A cold air intake will work extremely well with a performance tuner. When customers seek to increase performance and improve fuel efficiency, the above two products... view full answer...
Edge has told us that using a programmer such as # EP96TR with cold air intake is perfectly fine. However, it could still produce an overly lean condition (more air than fuel) so if you notice the motor running differently that would be why and adjusting the air/fuel ratio can fix that issue. view full answer...
The Superchips Flashpaq F5 Performance Tuner # SU1845 is compatible with other modifications like your K&N intake and exhaust you have on your 2010 Ford F-150 5.4L. Superchips will have a tune for stock equipment, one for a cold air intake and another for cold and intake and aftermarket exhaust. view full answer...
Yes, having a K&N cold air intake or other aftermarket add-on like exhaust will not prevent you from using a performance tuner like the Edge Evolution CTS3 # EP39YR.
I have included a link to a demonstration video, and a helpful article about performance modules for your reference. view full answer...
The Airaid # AR201-796 cold-air intake kit you referenced is indeed a fit for the 2012 Chevy Silverado 2500 HD with the 6L engine. I have confirmed this with Airaid. To see the installation instructions, as well as a product demonstration video, click the provided link. view full answer...
I spoke to my representative at Magnaflow and they stated that you can typically expect an increase in horsepower and torque up to 8HP and 10TQ respectively with the MagnaFlow Exhaust System part # MF15580 installed on your 2012 Nissan Frontier. The choking upon accelerating will not be caused by the Volant Cold Air Intake nor fixed by installing the Magnaflow exhaust system. This is likely an issue with your throttle body or catalytic converter.
A cold air intake paired with an exhaust... view full answer...
The best way to not only maximize but increase horsepower and torque on your 2017 GMC Sierra 5.3L V8 would involve installing a cold air intake, performance exhaust system, in addition to a performance chip tuner. Using these components will allow your engine to breath better and perform at it's peak output which will increase not only power but also fuel efficiency.
For a cold air intake compatible with your vehicle, I recommend using the Airaid MXP Cold Air Intake System part # AR200-285... view full answer...
Yes, it will. The Edge Jammer Cold Air Intake with Dry Air Filter item # EP384140-D is designed to fit the 5.7L Hemi engine in your 2017 Ram 1500. view full answer...
The Airaid MXP Cold Air Intake System # AR401-293 leaves space for the the factory sensors to connect to the new intake. This will make sure that there will be no codes thrown when you install and you will not need to recalibrate your ECU.
This will increase your fuel economy and make your engine much happier with the amount of air you will have going into your 2019 Ford F150's engine. Some cold air intakes do not have an enclosed box which makes it necessary to clean the filter out more... view full answer...
Yes, you can use both cold air intake # AR402-299 and Flashpaq programmer # SU1845 together at the same time on your 2013 Ford F-150 with 5.0 liter motor. The intake has an estimated gain of up to 17 horsepower and the programmer up to 24.4 horsepower. But these figures don't stack meaning that using both doesn't necessarily mean that you will see a gain of 31.4 horsepower. It will likely be slightly less.
For a programmer with a larger display and comparable power gains you can use the... view full answer...
The Edge Evolution Programmer CTS3 # EP59YR is designed to work with the smaller bolt-on modifications.
It offers a CAI-dedicated tune that will adjust for the cold air intake and prevent the engine from running too lean.
Depending on your engine and settings, you can add up to 35 horsepower and 50 foot pounds of torque to the stock levels. Performance gains will vary some based on your climate and if you have any other performance parts on the vehicle.
Your mileage will vary depending... view full answer...
The Superchips Flashpaq F5 Performance Tuner part # SU2845 by itself can offer an increase in horsepower up to 18 HP and torque up to 27 TQ. However, the supporting mods you have and will be installing (intake/exhaust) are really going to complement the tuner well. For example, if the cold air intake gave you 15 HP when installed, the use of the above tuner with this intake will likely increase this number from 15 HP to 20 HP. Please note that the above calculations are not exact figures... view full answer...