If your Dakota was equipped with the towing package that includes the 7-way connector on the rear bumper, part # 3020P is the correct Brake Controller Wiring Adapter. Part # 3021P is for the full-sized Dodge Ram.
If your Dakota was not equipped with the OEM tow package, you will need to hardwire your controller using our Brake Controller Installation Kit, part # ETBC6 if a 6-way connector is needed, or ETBC7 for a 7-way.
I will provide a link that will explain in detail how the Brake... view full answer...
The Derale 17" Frame Rail Fluid Cooler, # D13221, is a universal cooler so it will fit your 2004 Dodge Dakota but does not include the fittings and hose that you will need for installation.
Instead, I recommend taking a look at Derale Dyno-Cool Tube-Fin Transmission Cooler Kit, # D12901. Still very economical but offers a larger cooler and includes a high-temperature hose with clamps, nylon mounting rods, and Insta-dapt radiator adapter which fits most vehicles with 5/16" transmission... view full answer...
I spoke with our towing mirror manufacturers and neither had a confirmed fit. My contact at CIPA did however recommend the CIPA Universal Dual Lens Towing Mirrors - Clip On - Qty 2 # 11953-2 as it is a universal fit for truck mirrors and comes with straps to tighten down for a snug fit without obstructing your existing mirrors. view full answer...
The Erickson Truck Bed Ladder Rack, # EM07708 will work with either size bed and with a tool box mounted in the bed. The ladder racks mount to the under side of the truck's bed and can be mounted anywhere you need along the bed. As long as the racks can fit in the space between the tool box and tailgate and accommodate the length of your ladders, then you will have no problem with using the racks with either truck bed. view full answer...
I have a crossbar solution for you. Unfortunately, Yakima does not produce a fit kit that works with the Baseline roof rack towers Y00150 specifically for your 2002 Dodge Dakota.
However, if you want to attach a single Yakima crossbar to your 2002 Dodge Dakota, the only way is by using the truck's bed rails. In order to do that, you need the Yakima HD Crossbar - Aluminum - 68" Long - Qty 1 # Y95FR along with the Yakima BedRock HD Towers for Truck Bed Rails # Y01160. It is important to... view full answer...
After looking up what your mirrors look like it appears as if the K Source Universal Clip-On Extra Large Towing Mirror # KS3891 that you referenced should work well on your 2008 Dodge Dakota.
Check out the review video I attached for this product also. view full answer...
I do have a solution for you but the Integrated OEM Tailgate Lock - 1999-2007 GM Full Size Pickups # LH-003 is designed to only fit GM Full Size pickups.
The solution I have for you is the Pop & Lock Custom Tailgate Lock - Steel - Manual - Black # PAL3600. The Pop & Lock # PAL3600 fits all 1997-2011 Dodge Dakotas. This lock offers more protection because it fits into the housing of the handle, making it very difficult to pop out. view full answer...
The Westin Perfect Match Series Rear Step Bumper # 31016 fits the 2010 Dodge Dakota (excluding if you have the Quad Cab). It does not however fit the 2010 Dodge Ram.
The 2010 Dodge Ram is a full size pick up truck, while the 2010 Dodge Dakota is a mid-size pick up truck. It sounds like you have a 2010 Dodge Dakota and the # 31016 does fit that truck. view full answer...
If by factory trailer mount you mean a towing bumper, then the Westin Perfect Match Series Rear Step Bumper # 31012 is a fit for all models of the 2001 Dodge Dakota Sport R/T, SLT and base models. My contact at Westin confirmed the fit on the 2001 Dakota Sport.
This factory-style replacement bumper bolts on with included hardware (no drilling required) and provides a 3/4-inch hitch ball hole and a towing capacity of 3000-lbs. With this you can use a 2-inch hitch ball such as # A-82 from... view full answer...
I have confirmed with my contacts at Westin and the # 31012, that you referenced is confirmed as a fit for your 2004 Dodge Dakota Quad Cab, as long as it is an R/T, SLT or base model. According to my contact the exclusions regarding bumper fit on the Dakota quad cabs begins for the 2005 model year.
This bumper is designed as a custom fit and direct replacement of your original bumper. It has a towing capacity of up to 3,000 pounds, and a tongue weight capacity of 300 pounds. It will accept... view full answer...
Correct, the T-One Vehicle Wiring Harness part # 118329 which is a fit for a 2000 Dodge Dakota plugs in behind the tail lights so it would bypass any issues you had with a factory trailer wiring harness. view full answer...
For the Roadmaster Brakeaway Kit for BrakeMaster # RM-8600 the length is 12" inch and at the widest point where the mac valve is located is 5" inches and the cylinder is 2 1/2" diameter.
We have a similar kit designed for use with motorhomes that have air brakes with the Demco SBS Air Force One part # SM99243. view full answer...
The Extang replacment tarp you asked about, part # EX1720, is for the Extang BlackMax, part # EX2720, that fits the 6-3/4 foot bed of specific model years of the Ford Super Duty.
It looks like you have a 2007 Dodge Dakota with a 5 foot bed. The BlackMax that fits your truck is part # EX2765 and its replacement tarp is part # EX1765.
If you have a different truck let me know. view full answer...
The Prest-O-Fit 4-Piece Step Rug Set for MORryde StepAbove RV Steps # PR63SR are designed to fit 19-1/2" wide steps like the MORryde StepAbove RV Steps # MR88RR have. You'll just want to measure the width of your steps to confirm fitment. As for the depth, these covers are attached to the step using springs that can easily stretch to fit both your 10-1/2" and 8" depths. view full answer...
I spoke with my contact at Curt about the compatibility of that hitch with a Dodge Dakota full-sized spare tire. It turns out he has a 2011 Dakota. They used his truck to do some of the test fits and found that the Curt # 13230 fit just fine with the full-sized spare. He said that when raising or lowering the spare, you might need to push the tire toward the front of the vehicle just a little bit so it clears the hitch, but other than that, you will have no worries. You can see the installation... view full answer...
I spoke with my contact at Westin about the Sportsman Grille Guard, # 40-1665, for your 2005 Dodge Dakota. he stated that while the grille guard can support aftermarket lights, it is not designed to support a winch or for winching applications.
What you could do to mount a winch at the front of your Dakota is to install a front mount hitch # 31228, and then a hitch mounted winch plate like # BDW20011. I have included a link to the winch plates we carry below as well as a link to the installation... view full answer...
Yes, the Timbren Front Suspension Enhancement System, item # TDDF1004, will fit on the 1995 Dodge Dakota 4 wheel drive with 3.9 liter engine, and a 6-1/2 foot bed.
If you have an 8 foot bed model you willl need to use the Timbren Front Suspension Enhancement System, item # TDDR1002, on your 1995 Dakota. view full answer...
The Westin Diamondstep Replacement Bumper with Custom Install Kit, Black Powder Coat, item # 63000-93800, will fit nicely on your 2000 Dodge Dakota as long as your truck is not a Quad Cab (4 Door) model. This bumper is black powder coated with a diamond plate top for sure footing.
You do not have to use the higher priced bumpers (see link) unless you want the added features that they offer, like chrome finish, rubber step pads, or OEM design. view full answer...
Yes, the Pop & Lock custom tailgate lock, part # PAL3600, will fit your 2001 Dodge Dakota Sport. It is designed to fit the Dakota from 1997 to 2011 as well as the Mitsubishi Raider from 2006 to 2009. view full answer...
You can install the T1 connector, # 118323, on your 2005 Dodge Dakota without disconnecting the factory wiring harness. It might be easier and more cost effective to determine what the issue is with the factory wiring harness.
Some common problems are corrosion in the vehicle and/or trailer side connectors. Corrosion can build up in the plugs and behind them where the wires connect where you cannot see it. This can cause a poor connection and can lead to any number of problems.
If the... view full answer...
Go To Results