How To Know If Prest-O-Fit Step Rugs Will Fit Your MORryde StepAbove RV Steps

Question

Question:

Just bought a new toy hauler with Morryde 4 steps. The top step is 10.5inch deep and the other 3 steps are 8inch deep. Will these fit?

asked by: Dan J

0

Expert Reply:

The Prest-O-Fit 4-Piece Step Rug Set for MORryde StepAbove RV Steps # PR63SR are designed to fit 19-1/2" wide steps like the MORryde StepAbove RV Steps # MR88RR have. You'll just want to measure the width of your steps to confirm fitment. As for the depth, these covers are attached to the step using springs that can easily stretch to fit both your 10-1/2" and 8" depths.

expert reply by: Kevin C

0

Answer 1

The most likely cause of the "no signal" error you are receiving with the Furrion Vision S Wireless RV Backup Camera System part #FOS43TASF is due to an interruption on the camera's power wire. Make sure that the camera is receiving…

view full answer...

Answer 2

The newer Chevrolet and GM pickup trucks have a known power deficiency issue with the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras #FCE48TASL-05. There is likely nothing wrong that you did, the problem is the…

view full answer...

Answer 3

The Roadmaster Comfort Ride Leaf Spring Suspension Kit #RM-2460-2580 isolates the front and rear suspension from each other. So the axles will not distribute the weight like it will with equalizer style spring systems. While this might not seem like…

view full answer...

Answer 4

Yes, the bearing kit part #BK3-210 does fit a good portion of the 7,000 lb Dexter axles out there, but some of the 7k Dexter axles require a slightly larger grease seal which instead requires the kit part #BK3-200. What you'll want to do is…

view full answer...

Answer 5

Typically a Dexter 7k axle will have a diameter of 3 inches and an 8k axle will have a diameter of 3-1/2 inches. The thicker the axle the more weight it can handle. There really isn't an advantage to going with higher capacity leaf springs than…

view full answer...

Answer 6

The Never Fail Bushings were discontinued because they didn't sell as good as they thought they were, they were also having problems with the product. The bronze bushings wear out and start to crack from friction, age, heat, and from exposure…

view full answer...

Answer 7

I have a couple options for you to replace the suspension on your 2019 Grand Design Solitude 380FL 5th wheel camper. First the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570 which I see you already found is one…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together, I would…

view full answer...

Answer 10

You're correct, the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen #FOS43TASF has been known to need the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera Item #FR87PR…

view full answer...

Answer 11

You do not have to change the connector or add the PWM filter that splices in; all you have to do is add an adapter that plugs into the 7-way of your 2023 Chevy Silverado to get the correct amount of power to your Furrion Vision S camera system. What…

view full answer...

Answer 12

Is your truck a newer GM truck by chance?

view full answer...

How To Know If Prest-O-Fit Step Rugs Will Fit Your MORryde StepAbove RV Steps

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching