I grabbed a tape measure and went out to our warehouse to measure the Draw Tite hitch # 75210. From the center of the first hole to the edge of the receiver measured 9-3/4". From the second set of holes it is 12-1/2" to the edge of the receiver. I made a drawing for you which I have included below. view full answer...
I would be happy to help you. We have those items and I was able to get the measurements for you. I have attached pictures detailing the specific dimensions you have asked for. The Curt Hitch Receiver Item # 13250 fits the 118 inch wheelbase with single rear wheels,140 inch wheelbase with single rear wheels, and 158 inch wheelbase with single rear wheels on 2005 Dodge Sprinters. The Draw-Tite Hitch Receiver item # 75210 fits 2005 Dodge Sprinters with a 140 inch wheelbase with single rear... view full answer...
The distance between mounting hole centers on the Roller Accessory for Rhino-Rack Pioneer Platform Racks # RR43131 is 45-1/4 inches. This 50" roller is compatible with Rhino Rack Pioneer Platforms that are 56" wide, such as # RR42112BF. view full answer...
I have attached a diagram I made of the Draw-Tite Max-Frame Trailer Hitch Receiver item # 75420. From bolt hole to bolt the hitch is 37-5/8". This hitch fits 2004 - 2008 Dodge Ram Pickup 1500s and 2003 - 2009 Dodge Ram Pickup 2500 and 3500s. I have linked an installation video.
I saw you were looking for a hitch for a 2008 Dodge Sprinter Van. There is a Draw-Tite that fits multiple models and wheelbases. It is item # 75549 and it fits:
2500 Van - 144 inch Wheelbase - with standard bumper
2500... view full answer...
There is not a 60 inch long platform rack (from Rhino-Rack or elsewhere) that is only 38 inches wide; the longest 38 inch wide option is the 48 inch long Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 48" Long x 38" Wide # RR42114BF.
As for the capacity, there isn't a specific one; per Rhino-rack, the "Maximum permissible load is set by the vehicle manufacturer less the weight of the Platform." view full answer...
The anchor plates that come with the Replacement Hardware Bag for Yakima LandingPad 1 part # Y8890028 are 3/4" x 7/8". The thread size for the bolt is M6. view full answer...
The Curt # 13250 has a length of 13-1/2" from the center of the first bolt hole on the mounting bracket to the end of the receiver and the # 14250 has 14" with the same measurement. I've also linked photos of these with those dimensions illustrated for you to have a look at.
If there is a specific length you're seeking, just let me know and I can see if there is anything we have that will work. I've also linked an installation video of the # 13250 for you to have a look at, where it provides... view full answer...
The Draw Tite hitch part # 75549 that fits the 2007 Dodge Sprinter does not fit models that have a 30-3/8 inch wide frame like you mentioned. This measurement is the outside to outside width of the frame measuring from the two frame channels. view full answer...
The distance between mounting hole centers on the Roller Accessory for Rhino-Rack Pioneer Platform Racks # RR43130 is 43-1/4 inches. This 48" roller is compatible with Rhino Rack Pioneer Platforms that are 54" wide, such as # RR42101BF. view full answer...
The diameter of the tubing on the Thule Elite Van XT Bike Rack part # TH302043 is 1 inch. It has a weight capacity of 42 lbs per bike also. view full answer...