Expert Answers about Honda Trailers
- Replacement TPMS Sensors For TireMinder Solar Powered TPMS Kits
- The sensors for the Solar TireMinder TPMS # TPMS-TRAILER must come directly from TireMinder.
You will have needed to have registered your TPMS kit with them on their website. If you have already done that you can call them at their (772) 463-6522 to get a new sensor as it must be set up specifically for your kit and the sensor that is needing replaced.
view full answer... - Can Trailer Wheels Listed For Boat Trailers Also Be Used On RV Trailers?
- Wheels like the Aluminum Hi-Spec Series 6 Trailer Wheel # AM22652B can be used on a boat trailer or RV pull trailer. We list boat trailer wheels as any wheels with corrosion/rust resistance but those wheels can also be used on RV trailers.
view full answer... - Trailer Valet Trailer Dolly Mover For a Lance 1965 Travel Trailer
- The Trailer Valet MV PRO Trailer Dolly # TV96FR is their all new dolly and is listed under their Products/Trailer Movers. This is going to be overkill for your Lance 1685 since the dolly is rated for trailers up to 12,000lbs and your Lance is going to have a maximum GVWR closer to 6,300lbs. The Trailer Valet XL Trailer Dolly # TVXL25 will save you some money and is rated for trailer up to 10,000lbs which is more than enough for your Lance.
view full answer... - Class I VS II Trailer Hitch Receiver For a 2020 Toyota Camry For Towing A Trailer
- According to the owners manual for your 2020 Toyota Camry, "Toyota does not recommend towing a trailer with your vehicle. Toyota also does not recommend the installation of a tow hitch or the use of a tow hitch carrier for a wheelchair, scooter, bicycle, etc. Your vehicle is not designed for trailer towing or for the use of tow hitch mounted carriers."
With that said if you decide to go ahead and tow a trailer the Curt Trailer Hitch Receiver # C11576 is a class I receiver which is rated...
view full answer... - Trailer Hitch Receiver for Towing With a 2015 Kia Cadenza
- I recommend the Curt Trailer Hitch Receiver # C12118 on your 2015 Kia Cadenza. This hitch has a tongue weight rating of 350lbs and 3,500lb trailer rating. You will want to ensure that you do not exceed the weight ratings given by the manufacturer for your vehicle. This will not require you to change your rear shocks. If your suspension is sagging you should check that the weight on the trailer is distributed properly across the trailer and you do not have to much tongue weight. You typically...
view full answer... - Recommendations For Carrying 2 Adult Bikes and 4 Kids Bikes On a Travel Trailer
- I have a better solution for you, the Jack-It 2 Bike Rack for A-Frame Trailers # LC429756 will attach to the front of your travel trailer using the same bolts that hold the tongue jack. This will hold 2 bikes up to 80lbs total on the front of your camper above the propane tanks.
If that type of connection will not work for your trailer jack, the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier # CC-275 will bolt to the trailers frame and allow you to use a hitch mounted bike...
view full answer... - Can Curt Trailer Wiring Harness # C45ZV be Used with LED Trailer Taillights
- Hey Terry, yes the Curt trailer wiring harness part # C45ZV that you referenced is compatible with trailer lights that are LED.
view full answer... - Electric Trailer Jack Recommendation for a 7,500 lb Boat Trailer
- Hey Ryan, thanks for reaching out!
The only true electric trailer jack made to fit a standard boat trailer with a pole tongue is the Fulton XLT Powered Drive Trailer Jack # F141401. Even though this is the only option available, Fulton has added some provisions (like the ZMax finish and stainless ACME screws) to help make it more durable and built to resist corrosion from water.
A properly loaded trailer will have a tongue weight that is 10-15% the weight of the fully loaded trailer so...
view full answer... - Curt Echo Trailer Brake Controller With 7-Way Round Pin Trailer Connection
- The Curt Echo Trailer Brake Controller # C51180 needs to have a 7-way blade connector on both the tow vehicle as well as the trailer.
The Custer Trailer Connector Adapter # ADP7R-7B that you found is designed to adapt a vehicle with a 7-way round pin connector to allow a trailer with a 7-way blade connection to be towed. It will not work properly with your trailer having a 7-way round pin male connector.
The Pollak Trailer Connector Adapter # PK12728 will convert the 7-way round pin...
view full answer... - Does 225/75-15 Trailer Tire Fit Aluminum Liger Trailer Wheel
- Yes, a 225/75-15 trailer tire, like the Kenda # AM10256 or Provider # TR225LRE, will fit the Aluminum Liger Trailer Wheel # LH34FR.
This is a beautiful wheel that will improve the aesthetic of any trailer; the valve stem is included with this wheel, but for lug nuts you can use the Lionshead Trailer Wheel Lug Nut # LHLR103.
view full answer... - Can 2009 Cadillac DTS Tow Trailer
- Hey Dan, it looks like the 2009 Cadillac DTS has a towing capacity of 1000 lbs so as long as the trailer weighs less than that it could tow a trailer. We have a trailer hitch that fits your vehicle with the Curt # C12058 and then for trailer wiring you'd need the part # 118535 as well.
view full answer... - Will Trailer Valet JXS Trailer Jack Work With Dump Trailer
- The Trailer Valet JXS Trailer Jack # TV64FR would be a good option for your dump trailer. This has a lift capacity of 3,000 lbs and support capacity of 5,000 lbs so even if it is a 12k dump trailer it will be able to handle the tongue weight without a problem. I really like this jack since it comes with the power drill attachment so you don't have to manually crank it if you have a drill handy. As long as your frame is no larger than 4-3/4" tall x 3-3/4" deep this will work for you.
view full answer... - Is There a Folding Trailer Tongue Jack To Replace Jack On a 2021 Karavan 5' X 8' Utility Trailer?
- The Ultimate Trailer Jack # 322-RDJ-2K is going to be the best option we have for your 2021 Karavan 5x8 utility trailer. This will mount into the A-Frame mounting holes and easily retracts and extends as needed. I am not aware of anyone who makes a tongue jack that will mount in this position and then fold up and down as needed. Those types of jacks like the Dutton-Lainson # DL22300 are going to bolt to the side of the trailer frame.
view full answer... - Which Side of a Trailer Does the Fulton Single Axle Trailer Fender with Top Step Fit
- The Fulton Single Axle Trailer Fender with Top Step # F008564 is designed to fit both the right and left side on your trailer. Since it is symmetrical, no driver or passenger side designation is necessary. These are designed to fit single-axle trailers with 14" diameter wheels.
view full answer... - Protector To Reduce Damage From Trailer Rolling Into Bumper When Connecting and Disconnecting
- While we do not have a Trailer Hitch Bumper Protector like you found on Pinterest, we do have the "Bump Me" Trailer Coupler Vehicle Cushion # DL13352 which may solve your problem. This mounts to the trailer rather than between the ball mount and hitch ball like the one you found. The cushion we have fits onto the lip of a coupler.
view full answer... - Availability of 5-Pole Round Trailer Connector for Ranger Boat Trailer
- Hi Todd; we have one 5-way round trailer connector which is the Pollak 5-Pole, Round Pin Trailer Wiring Connector # PK11501. You can use this to replace the 5-way flat on your Ranger Boat Trailer.
view full answer... - Does Tongue Weight Change On a Loaded Trailer
- Yes it can change, which is why it's required for you to load your trailer and then get it weighed. You can either take this to a scale to get weighed or use the etrailer Tongue Weight Scale for Campers and Utility Trailers # e99044 and o it yourself.
view full answer... - Recommended Trailer Brake Controller For a 2019 Ram 1500 Laramie For Pulling a Travel Trailer
- The trailer connector in your photo will fit the 7-way blade connector that you have on your 2019 Ram 1500 Laramie.
You will likely need a brake controller to be able to safely pull the trailer. I recommend the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 as it is a proportional controller that will automatically adjust braking force that is sent to the trailer. It also has a customizable LCD screen that is easy to read and helps diagnose any trailer braking issues should they...
view full answer... - Spare Tire For Triton Elite Aluminum Jet Ski Trailer
- I recommend the Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire - Load Range E # AM10140 and the Aluminum Lynx Trailer Wheel - 12" x 4" Rim - 5 on 4-1/2 - Silver # LH45FR for Triton Jet Ski trailer. This aluminum wheel will stand up well against corrosion. The tire is the same ST145/R12 Load Range E tire that is on your Trailer.
The CE Smith Offset Spare Trailer Tire Carrier # CE27310G will allow you to mount the spare onto a trailer frame up to 3" wide and 5" tall.
view full answer... - Spare Tire For 4 X 8 Apogee Optimax Folding Utility Trailer
- The Apogee Optimax Folding Utility Trailer will use a bias ply tire. Specifically it is a 5.30-12 tire with a load range C.
For a spare tire I recommend the Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel # AM30850. You can mount this to the front of the trailer with the CE Smith Spare Tire Carrier for Trailers # CE22007Z-11050-2. There the tire will not interfere with the folding ability of the Apogee trailer.
view full answer...
Go To Results