Curt Echo Trailer Brake Controller With 7-Way Round Pin Trailer Connection

Question:

Can this connect to a Curt Echo unit on the trailer? Trailer has 7 pin round male connector which can plug into the female end of the ADP7R-7B, but can the adapter plug into the RF unit? Or, is the housing on the male 7blade end removable? Or, is there another adapter that will work? Thanks

asked by: Robert J

Expert Reply:

The Curt Echo Trailer Brake Controller # C51180 needs to have a 7-way blade connector on both the tow vehicle as well as the trailer.

The Custer Trailer Connector Adapter # ADP7R-7B that you found is designed to adapt a vehicle with a 7-way round pin connector to allow a trailer with a 7-way blade connection to be towed. It will not work properly with your trailer having a 7-way round pin male connector.

The Pollak Trailer Connector Adapter # PK12728 will convert the 7-way round pin connector of the trailer to a 7-way blade connector on the Tekonsha Prodigy RF # TK94FR.

As long as the 7-way vehicle end has the 12 volt battery charge circuit and Combined stop/turn circuits, it will work. The brake light signal must be on the same terminals as the turn signals.

expert reply by: Bud M