Expert Answers about Chevrolet Tracker

Replacement Hitch Bolts for Draw-Tite 41537
The Draw-Tite Max-E-Loader Trailer Hitch Receiver - Custom Fit - Class III - 2" # 41537 will use M12 x 1.25 x 30mm CL8.8 hex bolts and conical toothed washers. This fits into the factory weldnuts in your Tracker frame. If you want the factory hardware you can order it using # RHK.
view full answer...

Replacement Hardware for Trailer Hitch on 2001 Chevy Tracker
There is replacement hardware available for a trailer hitch on your 2001 Chevy Tracker. All you need to do is go to product page # RHK, enter the part number of your hitch in the "Hitch Item Number" box and select the manufacturer. For example, if you have the Draw-Tite 41537, you would enter "41537" in the "Hitch Item Number" box and select "Draw-Tite from the drop-down menu.
view full answer...

What Tow Bar Wiring Kit Is Needed For A 2001 Chevrolet Tracker
The RoadMaster Tail Light Wiring Kit with Bulbs, part # RM-155, will not work on a 2001 Chevrolet Tracker. There will not be enough room in the taillight housing to fit the extra bulb. The tow bar wiring harness you will need for your 2001 Chevrolet Tracker is the RoadMaster Universal Hy-Power Diode Wiring Kit, part # RM-154. On your 2001 Chevrolet Tracker with the 3-wire system (separate brake and turn signals) this wiring kit will use the vehicles brake lights to function as both brake...
view full answer...

Will a Trailer Wiring Harness Affect a Flat-Tow Wiring Harness on a 1999 Chevrolet Tracker
The trailer wiring harness will not be affected by the Roadmaster InvisiBrake Supplemental Braking System part # RM-8700, the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267, or the Roadmaster Brake-Lite Relay Kit for Towed Vehicles part # RM-88400 that you have on your 1999 Chevrolet Tracker. The diodes included with the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit simply stop the backflow of power therefore you can install the Curt T-Connector Vehicle...
view full answer...

Will Tow Ready Adjustable Tow Bar # 63180 Work With Roadmaster XL Base Plates on 1999 Chevy Tracker
I would first recommend to check your owners manual or check with Chevrolet regarding any guidelines or modifications that might be necessary to flat tow your 1999 Chevrolet Tracker. Some vehicles require modifications such as a drive line disconnect, transmission lube pump, freewheeling hubs or axle disconnects. To use the Tow Ready Adjustable Tow Bar, part # 63180, on the Roadmaster XL base plates you will need to use the Roadmaster Base Plate to Tow Ready Tow Bar Adapter, part # RM-025,...
view full answer...

Base Plate Kit for 1998 Chevy Tracker 4-Door with Roadmaster Eagle 8000 Tow Bar System
There are 2 possible options for your 1998 Chevy Tracker. If you have the Suzuki Sidekick motor (that came in the 1998 Geo Tracker) then the part # 1007-2 is what you want, otherwise my contact at Roadmaster said that the kit # 1012-1, which fits a 1999 Chevy Tracker, looks like it is compatible. From the picture you sent in I'm pretty sure the part # 1007-2 is the one you want. Either kit will fit with the Eagle 8000 Tow Bar system that you are currently using. For a complete flat towing...
view full answer...

Blue Ox Parts Needed to Flat Tow a 2002 Chevy Tracker Behind a 2006 Winnebago Adventurer Motor Home
There are 5 basic components that you will need to flat tow your 2002 Chevrolet Tracker behind your 2006 Winnebago Adventurer. You will need base plates, a tow bar, a wiring kit, safety cables and a supplemental braking system. You would only want a fuse bypass switch if your vehicle requires fuses to be pulled when flat towing. To determine this, I recommend checking your owners manual under the recreational towing section. From my research, I could not find any information that showed...
view full answer...

Roadmaster Base Plate Kit Recommendation for a 2000 Chevy Tracker
The correct Roadmaster base plate kit for your 2000 Chevy Tracker is the part # 1012-1. This is compatilble with your Roadmaster Explorer tow bar. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle....
view full answer...

Factory Trailer Wiring Connection Point on a 2002 Chevy Tracker
I spoke with a customer who has performed this installation and had to remove the forward panel you mentioned. He stated that prior to removing the back drivers side jack compartment panel for access to the trailer wiring plug, he had to first remove the panel in front of it, by removing a few screws. The back side panel then is very carefully pulled out a bit at a time, to separate the panel from the side. Most of the inside panels are attached by inner snaps. For removal, they have...
view full answer...

Are XL Base Plates for a 1999 Chevy Traker Compatible with the Roadmaster Explorer Tow Bar
The base plates, # 1012-1, are XL style base plates for the 1999 Chevy Tracker and are compatible with the Roadmaster Explorer tow bar. To make the XL base plates drawbars removable, you may also need the Roadmaster Tow Bar Quick Disconnect Kit, # RM-201.
view full answer...

Recommended Tow Bar Wiring For 1999 Chevrolet Tracker Being Flat-Towed Behind Motorhome
The tow bar wiring kit I recommend for your 1999 Tracker is the Roadmaster 6-Diode Universal Wiring Kit for Towed Vehicles with Separate Lighting, part # 154-792-118158. You will need to hard wire the kit to your vehicle lighting which may mean you have to remove the tail lights to get to the wiring on your Tracker. We do not offer a custom wiring kit for your vehicle. I have attached a couple drawings that show how the wiring needs to be run on your vehicle you can check out. If you...
view full answer...

How to Install Curt T-Connector Vehicle Trailer 4-Pole Harness # C55372 in 2003 Chevrolet Tracker
The Curt T-Connector Vehicle Trailer 4-Pole Wiring Harness # C55372 that you referenced is a correct fit for your 2003 Chevrolet Tracker. This 4-pole trailer harness installs by simply plugging in to a connection point in the rear cargo area of your Tracker. You do not need to cut or splice any wires. I have linked the written instructions. Once you have connected the harness to your Trackers wiring you will have stop, turn and tail light functions for your trailer. Just in case you...
view full answer...

What Base Plates Are Needed For Towing A 2000 Chevy Tracker 4-Door 4WD
The base plates that you will need for the 2000 Chevy Tracker 4-Door 4WD are the Roadmaster XL Base Plate Kit, # 1012-1. These base plates will not work on models that have a brushguard. These XL series brackets are compatible with the RoadMaster Falcon 2 Tow Bar, # RM-520. You will also need the RoadMaster 68 Inch Single Hook, Coiled Safety Cables, # RM-643, these safety cables will keep the vehicle attached to the tow vehicle in case the coupler becomes detached from the hitch ball. I...
view full answer...

SnowBear Winter Wolf Snowplow - 2 Point Mount - Electric Actuator for 1998 Chevy Tracker
The # SB324-167 plow you'd looked at is compatible with a 1998 Tracker, but the Custom Mounting Brackets are sold separately. The specific install kit needed will depend on the number of doors the Tracker has. For a 2 door, use # SB397-050 or # SB397-083 for a 4 door. If you click the provided link, you can see a product demonstration video.
view full answer...

Replacement Top with Rear Zip In Window for 2002 Chevy Tracker
Unfortunately we don't have just the zip in window available for your 2002 Chevy Tracker. You would need to get the entire Bestop Replace-A-Top - Black # B5136601 to get the rear window you desire.
view full answer...

Hardware To Secure Spare Tire To the Curt Trailer Hitch Mounted Spare Tire Carrier
In order to secure a spare wheel/tire to the Curt Trailer Hitch Mounted Spare Tire Carrier part # C31006 you can use the Trailer Wheel Bolts part # RG02-020 with the Trailer Wheel Lug Nut part # CE11051 which bolt have 1/2"-20 threads. They do not really offer any lug nuts with coarse 1/2"-13 threads so this will be your best option.
view full answer...

Everything Needed to Allow Flat Towing of My 2000 Chevy Tracker 4 door Behind Motorhome
You are headed in the right direction. The Roadmaster XL Base Plate Kit, item # 1012-1, will fit your 2000 Chevrolet Tracker, as long as you do not have the factory brush guard option on your vehicle. The RoadMaster Tracker Tow Bar, item # RM-020 will work nicely with the 2000 Tracker that should weigh in at less than 4,000 lbs. To connect the Tracker tow bar to the XL base plate kit and be able to remove the base plate draw bars you will also need the Roadmaster Tow Bar Quick Disconnect...
view full answer...

Trailer Hitch And Wiring Recommendations For 2002 Chevrolet Tracker For Towing Small Trailer
Since you said you are planning on towing a small trailer with brakes behind your 2002 Chevrolet Tracker, I will make recommendations for all of the items you will need. First, the Curt Trailer Hitch, part # C13517 is a good choice for a hitch on your vehicle. This is a Class lll hitch and has a 2 inch receiver opening. Even though you are limited by the towing capacity of the vehicle, installing a hitch with a 2 inch receiver gives you many more options for hitch-mounted items like bike...
view full answer...

Does Bestop Replace a Top part # B5136601 Fit 2000 Chevy Tracker with Factory Roof Hardware
The Bestop Replace a Top part # B5136601 that you referenced is designed to fit the factory top hardware of your 2000 Chevy Tracker and comes with everything needed to attach to the factory-original hardware. The picture does not show the different sections well, but this replacement does have a front and rear section for the roof.
view full answer...

Replacement Installation Hardware for a 2001 Chevy Tracker and Class III Hidden Hitch Trailer Hitch
You can get a replacement hardware kit from us for your trailer hitch. The Class III trailer hitch for the 2001 Chevy Tracker is # 87005. You will need part # RHK. On the RHK page enter the hitch number and then select the manufacturer from the drop down menu. Click add to cart and we will assemble the appropriate kit.
view full answer...