Factory Trailer Wiring Connection Point on a 2002 Chevy Tracker
Question:
On a 2002 Chevrolet tracker the connection point for the trailer wiring harness is not in the jack compartment. Some of the answers say it may be forward of the jack compartment. How does the next forward trim panel come off?
asked by: Matt
Expert Reply:
I spoke with a customer who has performed this installation and had to remove the forward panel you mentioned. He stated that prior to removing the back drivers side jack compartment panel for access to the trailer wiring plug, he had to first remove the panel in front of it, by removing a few screws.
The back side panel then is very carefully pulled out a bit at a time, to separate the panel from the side. Most of the inside panels are attached by inner snaps. For removal, they have to be carefully pulled outward until the panels are fully unsnapped from the inner body sidewalls.
The reassembly process is just the opposite of the dis-assembly. The trailer light harness and plug you can then see taped to the inside of the side body opening.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Connection Point for 4-Way Trailer Wiring harness on a 2003 Chevy Tracker
- Q&A: Plug In Play Wire Harness Vehicle End Location For 2004 Chevrolet ZR2 Tracker
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Choosing the Right Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Shop: Curt LED 4-Way Flat Connector (Vehicle End) Tester
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range B
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Search Results: hitch
- Search Results: trailer hitch wiring
- Video: Choosing the Right Brake Controller
- Q&A: 7-Way Trailer Plug Adapter or Compatibility with Lance Slide-In Truck Bed Camper
- Shop: Brake Controller
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: trailer brake controller
- Video: Review of etrailer - Brake Controller - ETBC7
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Article: My Trailer Hitch Doesn't Fit
on Custom Fit Vehicle Wiring
