What Tow Bar Wiring Kit Is Needed For A 2001 Chevrolet Tracker
Question:
Will this kit work on a 2001 Chevy Tracker 2dr convertible 4wd. Will there be specific installations instructions for this vehicle. Thanks.
asked by: Howard
Expert Reply:
The RoadMaster Tail Light Wiring Kit with Bulbs, part # RM-155, will not work on a 2001 Chevrolet Tracker. There will not be enough room in the taillight housing to fit the extra bulb.
The tow bar wiring harness you will need for your 2001 Chevrolet Tracker is the RoadMaster Universal Hy-Power Diode Wiring Kit, part # RM-154. On your 2001 Chevrolet Tracker with the 3-wire system (separate brake and turn signals) this wiring kit will use the vehicles brake lights to function as both brake and turn signals.
If you want to maintain separate brake and turn signals on your vehicle you will also need to add the Tow Ready Vehicle to Vehicle Taillight Converter, part # 118158, and 2 additional RoadMaster Hy-Power Diodes, part # RM-792.
I am including a video link to the RoadMaster wiring kit # RM-154 being installed on a 2006 Jeep Liberty. The vehicle is different but the wiring principle is the same. Also, I am including links to FAQ pages that will describe how to wire your towed vehicle for combined or separate taillight wiring.
You will also need to check with the manufacturer for instructions on the proper procedure for towing your 2001 Chevrolet Tracker 4wd, because some vehicles must be equipped with a transmission lube pump, an axle disconnect, drive line disconnect, or free-wheeling hubs before they can be towed.
Products Referenced in This Question
Vehicle to Vehicle Tail Light Converter
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 7 Round
- 7 Round
- Tow Ready
more information >
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 4-Pole Flat Connectors
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Roadmaster Hy-Power Diodes (Qty 2)
- Accessories and Parts
- Tow Bar Wiring
- Diodes
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster Tail Light Wiring Kit with Bulbs
- Tow Bar Wiring
- Bypasses Vehicle Wiring
- Bulb and Socket Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Tow Bar Wiring: Which Wiring Kit is for You?
- Article: Flat Towing Package for 2012-2014 Honda CR-V
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Choosing Between the Brake Buddy Select 3 and the Blue Ox Patriot Supplemental Braking System
- Q&A: Troubleshooting A Blue Ox Patriot RF Controller That Isn't Powering On
- Article: Flat Towing Package for 2007 Honda CR-V
- Article: Roadmaster Vehicle Specific Base Plates
- Q&A: Ignition and Shifting Procedure for Towing a 2014 Honda CR-V Behind an RV
- Q&A: Parts Needed to Flat Tow a 2010 Mini Cooper S with Manual Transmission
- Q&A: Tow Bar Lighting Solution for 2015 GMC Sierra 1500
- Q&A: What Is The Max AMP Draw Of The Blue Ox Patriot Supplemental Braking System
- Q&A: Fuse Bypasses Needed to Flat Tow a 2016 Chevy Traverse