To mount your older Thule Alpine Cargo Box onto the factory crossbars of the 2017 Chevrolet Suburban you can use the Replacement QM3 Hardware # TH04997. You will need to drill some new holes in the cargo box but the QM3 includes stick on hole covers for the old holes.
The correct Replacement Lid Lifter Hinge is # TH14936. view full answer...
The K-Source Replacement Side Mirror - Electric/Heat w Signal, Lamp, Memory, Power Fold - Driver # KS62160G is not available without the glass; you would need to buy the entire assembly. This mirror has the electric folding option that you need and it is for the driver side; if you need the passenger side you can find it here # KS62159G.
As a side note, I would make sure your current mirror is faulty and that it is not an electrical issue in the wiring circuit. If it is just an electrical... view full answer...
The brake output wire on the 7-Way installed on your 2006 Chevy Suburban provides the wiring only, no power, to the trailer brakes. To activate the trailer brakes you will still need to install a brake controller like the P2, # 90885, that you have referenced.
For this controller and your Suburban you will need wiring harness # 3015-P. The smaller black end plugs into the back of the brake controller. The other end plugs into a port on the Suburban. This port is located in a junction... view full answer...
If your 2001 Chevy Suburban 2500 came with a factory installed 7-Way trailer connector then you can use brake controller wiring harness # 3025-P with the P2 controller # 90885. There may be some additional connections you will need to make under the hood to make everything fully functional. I have included a link to an FAQ article that will help.
If your Suburban did not come with the factory 7-Way you will need to add one using # 30955. The connector to plug this 7-Way into is located... view full answer...
The only thing we have that has a spindle that isn't welded on are the Timbren axle-less systems like # A20RS545. To replace your spindles your best bet is to replace the axle and start with all new parts. This way it will be easy to find replacement parts that are compatible. view full answer...
In order to mount Thule WingBar Evo Crossbars # TH711400 on a 2008 Chevy Suburban with the factory rails you'll want to use the Evo Raised Rail Feet # TH710401. This foot pack will connect to the raised side rails on your Suburban and allow you to mount the WingBar Evo Crossbars. view full answer...
A 2000 Suburban requires a different style of mirror. The mirrors for a 2003 and up will physically not fit. We do not have heated and electric mirrors for a 2000 Chevy Suburban so if you already have those features I recommend the K-Source Universal Dual Lens Towing Mirrors # KS3990 or Custom Slip On # CM10800. These mirrors are manually adjustable and attach to the current mirror housing to retain your current features and increase your visibility when used.
If you want mirrors that... view full answer...
You will need the Pigtail # 3015-S to connect to your 2005 Chevrolet Suburban 2500 with the factory tow package. This will allow you to connect to the bare wires on your Tekonsha Voyager # 39510 since they most likely cut the factory connector off rather than installing the Pigtail # 20127 during the installation on your Ford F-150. If you feel it best to upgrade your controller to one like the Prodigy P3 # 90195 you will be able to use the Adapter # 3015-P so you will not have to splice... view full answer...
To flat tow your 1999 Chevrolet Suburban 2500 4x4, you will need at least 5 main parts. Those parts are a base plate kit, tow bar, safety cables, tow bar wiring and a supplemental braking system. Since you have requested Blue Ox, I have recommended Blue Ox parts (other than the wiring) for your Suburban below.
Base Plate Kit: Blue Ox Base Plate Kit # BX1640
Tow Bar: Blue Ox Alpha 2 Non-Binding Tow Bar # BX7380 (includes the needed safety cables)
Tow Bar Wiring: Roadmaster 4-Diode Universal... view full answer...
According to MagnaFlow the Stainless Steel Catalytic Converter, # MF23256, is the direct fit, 49 state catalytic converter for the 1995 Chevrolet K-1500 Suburban with a 5.7L engine. At this time there is not a California approved direct fit application for your Suburban.
I also checked on a Cat Back exhaust system for your 1995 Suburban and direct fit systems are only available for 1996 and newer K-1500 Suburbans with the 5.7 liter engine.
I added links to a couple of informational articles... view full answer...
The wiring harness that you will want for your Prodigy brake controller and your 2005 Chevrolet Suburban Z71 is part # 3015-P. For a mounting bracket, you can use part # P7685. You can also use part # 7686, if you plan on removing the brake controller from the truck frequently.
I have attached an installation video of the Prodigy on a 2004 Suburban for you to check out. The installation will be the same on your 2005 model. The factory brake controller port is located under the driver's... view full answer...
The longest MB Sturgis Propane Pigtail we offer with stainless overbraid and a 1/4" male inverted flare is 3' or 36", part # 100833-36. We do however have the length you need of 4' or 48" but only with the rubber hose, part # 100575-48-MBS. view full answer...
For a complete bolt on exhaust system, for your 2001 Chevrolet Suburban 2500 4x4 with 6.0 Liter engine, there are no 50 state legal systems available. We do have 49 state legal systems available.
Parts for a 49 State legal vehicle are listed below.
MagnaFlow Stainless Steel Cat-Back Exhaust System, # MF15798
MagnaFlow Direct Fit Stainless Steel Catalytic Converter, # MF93622 (Driver Side)
MagnaFlow Direct Fit Stainless Steel Catalytic Converter, # MF93623 (Passenger Side)
We have an installation... view full answer...
Brake controllers are not vehicle-specific so you absolutely can choose one and transfer it between your vehicles as needed. The Tekonsha Prodigy P3 # 90195 that you referenced is a popular, reliable and easy-to-use controller and is an excellent choice.
The quick-connect harness for the 2004 Suburban is part # 3015-P. For the Silverado you will use harness # 3025-P. Both are fully compatible with the P3. view full answer...
For the Thule Caprock Platform Truck Bed Rack for Crossbars # TH65YE you can use the LED Light Bar Mounting Brackets for Rhino-Rack Pioneer Platform Rack # RR43173.
This bracket kit will install into the T-Tracks on your platform rack and will provide a mounting point for your LED light bar. Since these brackets are not specific to any particular LED light bar you can use any light bar. view full answer...
I'm assuming you have a 1500, so going forward you're going to need a set of base plates, a set of tow bars, a braking system, and a wiring harness.
So, for a set of base plates I recommend going with the Blue Ox Base Plate Kit # BX1682. These are going to be easy to use and will work with the majority of tow bars on the market.
Speaking of which, for a set of tow bars I recommend going with the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar for Blue Ox Base Plates # RM-677.
These... view full answer...
Although the Timbren # TGMRYS4 would work for you, I'm not certain you'd be happy with the ride quality you'll experience once the suspension of your Suburban compresses and the preload is taken up which is when the helper springs come into play. The Timbrens offer up to 6000 of additional support which is way more than you'll need to offset the tongue weight of your travel trailer.
The SumoSprings # SSR-204-40 add 1000 lbs of additional support, and they're made of a more pliable material... view full answer...
We do have all the parts you will need to install a 7-way on your 1999 Chevrolet Suburban K1500, unfortunately the entire harness is not going to be plug and play.
First you will need the Hopkins Plug-In Simple Vehicle Wiring Harness # 41125 which is plug and play. This will give you a 4-way flat that takes care of the wiring for the running lights, brake lights and turn signals. The 4-way will connect to the Universal Installation Kit for Trailer Brake Controller # ETBC7. This will give... view full answer...
If your 1997 Chevrolet Suburban already has a working 4-pole flat trailer connector you can easily convert it to a 7-way type to allow for installation of a brake controller like the excellent Tekonsha Prodigy P2 # 90885. All you need is the controller itself and our installation kit # ETBC7, for which an install video is linked.
The ETBC7 includes the 7-way socket, wiring, connectors, circuit breakers - everything you need to complete installation of the P2. This will give you a 7-way... view full answer...
The K-Source Universal Towing Mirrors # KS69ZR have rubber pads on the straps to help protect your vehicle's mirror housing from scratches, so you won't have to worry about any damage being caused.
With that said, the best option is a custom fit towing mirror like the K-Source Snap and Zap # KS80920, which just slips over your factory mirrors to provide you with an extended view when towing a trailer. These are a great solution since they're not going to be as susceptible to road vibration,... view full answer...
Go To Results