We do indeed have the correct wiring adapter for your 2015 Mercedes-Benz Sprinter 2500 to go with the Tekonsha Prodigy P3 Brake Controller # 90195. It's different than the one that fits your '07 4Runner though, and the correct part number for your '15 Sprinter is the following:
- Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In # 3063-P view full answer...
I have the perfect trailer hitch receiver that is a confirmed fit for your 2015 Mercedes-Benz Sprinter. For this, I recommend using the Draw-Tite Class III Max Frame Receiver Hitch part # 75549 for cab and chassis models and part # 75601 for both the 2500 and 3500 models. I have attached an installation video of this hitch on a 2016 Mercedes-Benz Sprinter Van for you.
The Draw-Tite Class III Max Frame Receiver for cab and chassis models has a maximum weight capacity of 600 lbs. tongue... view full answer...
If your 2015 Mercedes Sprinter happens to have Thule or Yakima style tracks on the roof, then yes you can use a roof rack such as Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 54" # Y02-480B-NT or Silver # Y02-480-NT.
If your vehicle has the Rhino-Rack style tracks on the roof then you can use Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" # RRVA137B-2 or Silver # RRVA137S-2 along with the necessary Legs # RRRLT600 and Quick Mount Nuts # RRQMFK11-2.
I... view full answer...
I checked with RoadMaster about your valid concern and great question.
My contact tells me Roadmaster Rear Anti-Sway Bar # RM-1209-131 is a confirmed fit for your 2012 Mercedes Sprinter. This product is engineered to avoid interference with most popular aftermarket add-ons and accessories.
However, Minor modifications are sometimes necessary due to slight vehicle variations, even for the same year, make and model.
If running changes were made by the manufacturer after this kit was designed,... view full answer...
I reached out to the manufacturer, TST, for you about the TST TPMS for RVs - 6 Tire Sensors # TST-507-RV-6-C and TST TPMS for RVs - 6 Flow Through Tire Sensors # TST-507-FT-6-C.
I was told that for your set up, with rubber valve stems and steel valve extensions the system you will need is the TST TPMS for RVs - Color Display - Signal Booster - 6 Tire Sensors # TST-507-RV-6-C.
These are safe for use with your steel valve extensions and rubber valve stems. They told me that the flow-through... view full answer...
Per TorkLift's website, the EcoHitch Hidden Front Mount Trailer Hitch Receiver # 306-X7352 is a fit for Mercedes-Benz Sprinter Vans for the 2013-2022 models, so you should have no issues installing it on your 2015 model. view full answer...
I recommend going with the Curt Trailer Hitch Receiver # 13358 which is a Class III trailer hitch with a 2" receiver that is confirmed to fit a 2013 Mercedes-Benz 2500 Sprinter with a 144 inch Wheelbase and a factory step bumper.
This trailer hitch is rated for 5,000 lbs Gross Trailer Weight (GTW) and 500 lbs Tongue Weight (TW). Then used with a weight distribution system those ratings are increased to 7,500 lbs GTW and 750 lbs TW. Be sure to check the weight ratings of your 2500 in your... view full answer...
The Yakima LongHaul 4 Bike Rack for 2" Hitches # Y02476 measures 8" from the center of the hitch pin hole to the upright bar. As long as you have 9" or less from the center of the hitch pin hole on your hitch to the back of your motorhome this bike rack will fit just fine. Be mindful that the bike in the position closest to that upright bar will have the handlebars sticking out so that might affect what bike can be in that position.
If you have more than 9" to the rearmost part of your... view full answer...
For a wheel and tire such as the Loadstar ST205/75D14 Bias Trailer Tire with 14" Black Wheel 5 on 4-1/2 Load Range C. The Wheel Lock Set fits a 1/2" wheel bolts. Such as Wheel Lock Set for 1/2" Wheel Bolts # RG01-150. 14 inch wheels take 1/2"-20 lug nuts meaning the wheel lock will work. view full answer...
The Curt trailer hitch # C13388 fits the following versions of the 2015 Mercedes Sprinter vans:
3500 Van - 170 inch Wheelbase - with standard bumper
3500 Van - 170 inch Wheelbase - with standard bumper
2500 Van - 170 inch Wheelbase - with standard bumper
3500 Van - 144 inch Wheelbase - with standard bumper
Since you have the factory step bumper you'll have to go with the Curt # 13358 since your frame is different and requires a different hitch fit. view full answer...
Any suspension enhancement that you add to your 2011 Mercedes-Benz Sprinter 3500 wouldn't necessarily add height to your RV, but it would help to keep it level when under a load and would also help create a more comfortable ride.
The SumoSprings Maxim Custom Helper Springs # SSR-336-47-1 are a great option to add to your Sprinter for suspension enhancement. They have a 2,200-lb weight capacity at 50% compression (they will not raise the weight capacity of your Sprinter) and they are connected... view full answer...
The Curt Hitch # C13388 is confirmed as a fit for the 2010-2015 Mercedes Benz Sprinter 2500, 144- inch wheelbase with a standard bumper.
For a complete towing set up you may be interested in the following items:
Etrailer Ball mount kit # 989900 - includes 2 ball mounts, 1 1-7/8 inch trailer ball, 1 2-inch trailer ball, a pin and clip, and a bag.
Wiring Harness # C59496 - includes a circuit tester, quick connectors, and a fused power wire.
Check out the helpful article that I have... view full answer...
To answer your last question first on the Thule Thule T2 Pro XTR # TH83JV it measures 7 inches from the center of the hitch pin hole to the closest part of the pivoting bracket. These measurements are always taken from the center of the hitch pin hole because not all hitches have the same distance from the face of the receiver to their hitch pin hole.
On this rack it measures 7 inches from the center of the pin hole to the nearest rail where the closest bike will be. When tilted down that... view full answer...
The lower square tube on the Kuat Pivot # PVP20B is not designed or rated for use with any type of accessory. It also is not set up for it (no pin holes) so it is not a good option for your application. We do have adapter # RM-072-2 which has a 400 pound tongue weight capacity and 2 inch drop. However if you use it or anything similar it will reduce the tongue weight capacity of the trailer hitch by 50 percent. view full answer...
From the looks of your picture it appears the WeatherTech Front Auto Floor Mats # WT462491 and the Center Aisle Auto Floor Mat # WT462492 will fit. However, WeatherTech only tests the mats to fit into the Mercedes-Benz Sprinter as a van and not an RV. It's possible the RV manufacturer has made some modifications keeping the mats from fitting perfectly. view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver # 75549 fits a 2012 Mercedes-Benz Sprinter 3500 with the 170" wheelbase (and standard bumper) and as long as it does not have the 30-3/8" frame, measured outside to outside of frame.
If you have the factory step bumper then you need the Draw-Tite Max-Frame Trailer Hitch Receiver # 75601 instead which has the same criteria for fitment.
If you're looking to tow with the Sprinter then you need the T-One Wiring Kit # 118650 and a ball mount kit... view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75549 is a fit for a 2015 Mercedes-Benz Sprinter Passenger Model with Standard Bumper but you do need to be sure you don't have the 30-3/8" frame, measured outside to outside of frame.
I have attached a review below which confirms fit from one of our customers on the passenger model. I don't show the spare tire needs to be removed. view full answer...
It is possible the SumoSprings Solo Custom Helper Springs # SSR-338-47 will raise the rear of your 2013 Mercedes Sprinter 3500 about 1/2 inch to an inch when installed, with the reason being they replace your less effective factory bump stop.
That slight raise is actually going to be part of the benefit of the SumoSprings because this is what will help keep your Sprinter level, which will help improve your Sprinter's overall handling and stability so you can enjoy the time in your rig.
I... view full answer...
The Draw-Tite Class III Hitch, part # 75601 will fit a 2015 Mercedes-Benz Sprinter with the 144 inch wheelbase and factory step bumper unless the outside to outside dimension of the frame members is 30-3/8 inches (which is found on cab/chassis models and not passenger vans).
You can see the installation details by clicking the link I provided for you.
To complete your towing system, I'd recommend the following:
Trailer wiring harness w/ 4 pole trailer connector, part # TK22115
Ball mount,... view full answer...
For the 2011 Sprinter you can use Rear Anti-Sway Bar, # RM-1209-120. Mercedes made the Sprinter for several different companies so if is branded as a Mercedes, Dodge, or Frieghtliner if it is a 2011 this bar will fit. view full answer...
Go To Results