We do offer several options in a 2-inch hitch for your 2013 Nissan Pathfinder and the one I suggest is the Draw-Tite # 76031 because of its slightly simpler installation. A video, installation help articles and written instructions are linked to show you the process. Tools required are listed in the instructions.
For wiring you can use # HM40975 which provides both 4-pole flat and 7-way blade style connectors. A video is included for this item too. This will plug in to the round connector... view full answer...
For your 2013 Nissan Pathfinder, you will need the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers, # 3050-P. One end of this adapter plugs into the connector located near the top of the emergency brake pedal on your Pathfinder and the other end will plug into the back of your Prodigy brake controller. view full answer...
I was able to verify with the manufacturer that the correct replacement air spring for the Firestone Coil-Rite Air Helper Springs # F4118 on your 2020 Nissan pathfinder is air spring 6118. The bad news is that the replacement air springs are no longer available.
While it is far from ideal, if you are needing a replacement air spring for the 4118 system, you'd have to get the entire # F4118 kit or find one second hand. view full answer...
We have oodles of hitch covers. If you are looking for something specific, I have included a link to our hitch cover main page. There you will find all of the categories for hitch covers in different sizes and materials. We do have some Nissan logo covers but none that say Pathfinder.
Take a look at the black and chrome cover # CR-690 that fits 1-1/4 or 2 inch trailer hitches. For trailer hitch covers like these, I recommend getting a looking hitch pin to deter theft of the cover.
For... view full answer...
We can offer you both free-standing steps that have at least the 400-lb weight rating you need, and also steps that will install permanently on your 2017 Nissan Pathfinder.
In free-standing steps we have the 16 x 24-inch Safety Step # SASXLA-09C-G, with adjustable height and a 1000-lb weight rating. A yellow version is available too, part # SASXL-08C-Y. All such options are shown on the linked page.
The other linked page displays the tube steps/nerf bars that are offered for your 2017... view full answer...
There are indeed extension cables available in 5 foot increments as part # HM3100504060 or 25 foot lengths as part # HM3100504061. You can see current pricing by clicking the links I've provided for you. view full answer...
I have two hitch bike racks I recommend, depending on the bikes you will be carrying on your 2017 Nissan Pathfinder.
My first recommendation is the Saris MHS Modular Bike Rack for 2 Bikes - 2" Hitches - Tilting, part # SAR73MR. This hitch bike rack has a maximum weight limit of 60 lbs per bike. It is fender friendly, provided your front fender does not extend past the 2 o' clock position of your front wheel.
My second recommendation is the The Kuat NV 2.0 Base Bike Rack for 2 Bikes... view full answer...
We do not have any custom-fit towing mirrors for your 2015 Nissan Pathfinder but on the linked page you can see the universal-fit mirror sets we offer from CIPA and K-Source that will fit nicely on your Pathfinder.
Out of the options I recommend the K-Source set # KS3990 because these include a dual lens design and have a ratcheting strap mounting system that holds the mirrors securely for less image "ghosting" while you drive. These install without tools as shown in the linked video. view full answer...
We can help you with an extra-long 2-inch ball mount that has the 5 to 6-inches of rise you need for your trailer and that will allow installation of the Swagman Traveler XCS towing bike rack # S64664.
Curt 2-inch ball mount # C45100 offers 6-1/4-inches of rise and has 4-inches of available shank between the edge of the hitch pin hole and the reinforcing gusset so it should work great with the Swagman XCS. I went to our warehouse and confirmed this dimension, which is shown on the linked... view full answer...
The 4.80 X 12 is the size of the tire and the 4 on 4 is the bolt pattern of the wheel. The bolt pattern means it is a 4 hole wheel and the distance from the center of one hole to the center of the hole directly across from it is 4 inches.
Any wheel with a 4 on 4 inch bolt pattern and a large enough pilot hole diameter will fit your trailer. You will need to check the weight capacity of your axle and get the correct tire size that will be rated above the weight capacity of your axle.
The... view full answer...
We do have roof racks for your 2018 Pathfinder that will work great on either a bare roof or a roof with front-to-back side rails.
I recommend the Rhino-Rack Vortex rack system because it offers excellent performance and very good value. This aerodynamic rack will be quieter than any other type thanks to its wing-like bars that cut through the wind better than other shapes. We have a version for both of the possible roof configurations on your Pathfinder.
If your roof has front-to-back... view full answer...
The threaded portion that fits in the shank of the Thule Apex bike rack is typically not compatible with threaded locking pins from other manufacturers. We've received a few reports here and there stating that they will fit, but since Thule won't confirm this we cannot guarantee fit.
It's safest to use the lock that was specifically designed for the rack, the # THSTL2. One really nice feature of the Thule lock, it can be re keyed to match the locks on other Thule accessories, if you have... view full answer...
The Blue Ox Base Plate Kit - Removable Arms # BX1826 for a Nissan Pathfinder do not have the convenience link tabs as you mentioned. They cannot be added to the product but the manufacturer suggests installation in the manner shown in the attached photo. The manufacturer doesn't warranty any baseplates that have been customized in any way so they don't offer the tabs to weld in place. view full answer...
When you install the front hitch part # 65075 on your 2008 Nissan Pathfinder you will need to remove the air dam totally for it to install and then you can either leave it off or trim it and reinstall it after the hitch has been installed. view full answer...
All trailer wiring parts for the 2018 Nissan Pathfinder appear on the linked page. These include the item # HM40975 which is a Replacement combination 7-way/4-pole connector intended as a factory replacement.
If you have no trailer wiring you can instead use kit # 118273 which includes relays, wiring and the trailer connector along with the part # HM40975 which will replace the 7-way included in the kit t give you both types of connections. view full answer...
Weight distribution systems like the Reese Strait-Line # RP66084 can be fitted with a new shank portion, such as the # RP63971, when a different amount of height rise or drop is needed for the hitched trailer to remain level with the ground - which is essential for good handling.
It is also possible to use a different size shank to enable a weight distribution system used in a 2-inch hitch to be moved over to a vehicle that has a 2-1/2-inch hitch. In this case only the shank portion needs... view full answer...
We do offer a variety of clip-on style universal-fit towing mirrors that will work for your 2012 Pathfinder. The link provided will take you to our page for all clip-on towing mirrors; you can use the filters in the left margin to narrow the results based on your preferences by shape, brand, etc. Among the offerings is the K-Source Universal Towing Mirror # KS3891 that you referenced. This cost-effective mirror is highly rated by our customers that have purchased it.
Please note that this... view full answer...
If you are looking for a bracket kit for installing a plow on your 2002 Nissan Pathfinder you would want the part # SB397-084 which is confirmed as a fit for your vehicle.
Then for a plow the SnowBear Winter Wolf Snowplow # SB324-166 would work well. view full answer...
My contact at U-Ace confirms that they do offer a matching cargo area mat in the black 3D Kagu finish. The cargo area mat part # is M1NS0581309.
All of these mats feature three-layer construction consisting of a top layer of thermoplastic rubber, an inner layer of cross-linked polyethylene (which is waterproof, helps block transmission of noise and vibration, and which insulates from heat and cold) and a bottom layer of the patented MAXpider fibers that gently grip your Pathfinder carpet.... view full answer...
The trailer wiring harness part # 118266 that you referenced is a 7-way which bolts to a standard 7-way bracket like the part # 319-S7-61 which you referenced. This would be a good option but it will require drilling through the bracket to your rear bumper.
The most popular option I would recommend is the part # PK12711U instead which has hole pre-drilled. view full answer...
Go To Results