Expert Answers about Lincoln MKS
- Power Wire Routing Options When Installing a Wiring Harness # 118482 on a 2009 Lincoln MKS
- There should be other places you could attach the wire from the Custom Fit Vehicle Wiring, part # 118482, underneath your 2009 Lincoln MKS besides the parking brake line. A lot of guys will run the wires through the frame rails or zip-tie the wire to areas that are free from suspension components or hot exhaust parts.
If you wanted to find a way to run the wire through your firewall sometimes the holes in the firewall can be difficult to find. A lot of times in the firewall there are holes...
view full answer... - Installation Troubleshooting of Curt Universal Tail Light Wiring Kit on 2013 Lincoln MKS
- You won't need any type of converter when installing the Curt Universal Tail Light Wiring Kit # C63CR on your 2013 Lincoln MKS. However there is a distinct process that you'll want to follow to determine how this system will be installed that tells you whether you've got a 2 or 3 wire system and how to install the unit. It sounds like you might have installed this in a 3 wire configuration but there is no power on the turn signals.
I would start by checking any and all ground wires that...
view full answer... - Floor Mats Available In Black For 2010 Lincoln MKS
- For floor mats in Black, we have the WeatherTech line of mats. If you 2010 Lincoln MKS has the dual floor mat hooks to keep the mats in place, you will need WeatherTech Floor Mats, part # WT443021. If your MKS only has the single floor mat hook, you will need WeatherTech Floor Mats, part # WT442371.
I have linked instructions for the WeatherTech Floor Mats # WT443021 and # WT442371.
view full answer... - What is The Highest Rated Hitch for a 2010 Lincoln MKS
- The only trailer hitch receiver they make for your 2010 Lincoln MKS is a Class II receiver with a 1-1/4" receiver tube opening like the Curt Class II Receiver Hitch part # C12088. If you needed to use this hitch with an accessory that has a 2" shank then you will also need an adapter like part # HTAD but please keep in mind that using this adapter will reduce your hitch's weight capacity by 50 percent. You will also need the support strap part # 18050 while using the Curt hitch for any...
view full answer... - Parts Needed To Haul a 295LB Dirt Bike With a 2014 Lincoln MKS AWD Ecoboost
- You are going to need a Trailer # K2MMT4X6 to haul your dirt bike behind your 2014 Lincoln MKS. The Curt Trailer Hitch Receiver # C12088 which fits your MKS has a 1-1/4" receiver and Dirt Bike Racks # e56UR are going to be for fitting a 2" receiver. The trailer will also better carry the weight of the dirt bike and other gear you will be taking since your MKS was not designed for hauling large heavy objects. This reduces rear sag on your suspension too since you will only be carrying a...
view full answer... - Recommended Hitch for a 2014 Lincoln MKS
- To add a hitch to your 2014 Lincoln MKS, I recommend the Curt item # C12088. This hitch is custom fit and bolts to your MKS with included hardware. This is a class II hitch with a 1-1/4" receiver. It has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight.
I really like the Curt Hitch item # C12088 because the crosstube installs behind your rear bumper leaving only the 2" receiver visible. This not only helps with ground clearance but also looks better.
I have linked an...
view full answer... - Recommended Replacement LED Light For A Stromberg Carlson Electric Trailer Frame Jack
- Yes, the Replacement LED Light for Stromberg Carlson Electric A-Frame Tongue Jack # 2500-06 will replace the old incandescent lights that you currently have on your Stromberg Carlson Electric Trailer Jack # JET-3755.
view full answer... - Availability Of Hardware Kit For Curt Trailer Hitch C12088
- That is a hardware kit we can provide with part # RHK. Simply enter the hitch item number C12088 before adding to your cart.
view full answer... - Recommended Baseplate For A 2016 Lincoln MKS Ecoboost With Adaptive Cruise Control
- According to Roadmaster the Roadmaster Crossbar-Style Base Plate Kit # RM-524440-4 will fit the 3.7 and 3.5 Eco Boost only. Most likely there was a loss in translation between our fitguide and Roadmaster's since it's displayed as only a fit for non-ecoboost models. If you have a 3.5L or 3.7L Ecoboost then you'll be fine with the # RM-524440-4.
This baseplate has a crossbar style connection point so you'll be able to connect to your Roadmaster crossbar style tow bar. If you don't already...
view full answer... - Is the SeaSucker Monkey Bars Roof Rack Safe for Long Distance Trips
- I would just check the pressure for the SeaSucker Monkey Bars Roof Rack # 298-SX6000B any time you make a pit stop. As long as you follow the instructions when installing these on your 2013 Lincoln MKS you won't need to worry about them coming off.
It is a good idea to do a quick visual check though at pit stops (or whenever you want to make you comfortable) just to be on the safe side.
To secure your kayak to this roof rack I recommend using the Pads for SeaSucker Monkey Bars # 298-SA1022...
view full answer... - Are the Ends of Westin PRO TRAXX Oval Nerf Bar Ends Enclosed
- The ends of the Westin PRO TRAXX Oval Nerf Bars # 21-53240 are completely enclosed so your previous problem will not be a concern. I have attached an image below showing the enclosed end along with a review video.
view full answer... - Replacement Step Pad For Westin 21-4085
- We do indeed offer replacement step pads. You'll need part # 21-0001 which does include the necessary barrel clips. The replacement step pads are sold individually.
view full answer... - Tow Bar Wiring Solution for 2011 Lincoln MKS
- There isn't a plug and play tow bar wiring harness that fits your 2011 Lincoln MKS so what you'd need is a diode kit like the part # RM-15267 which does splice into your vehicle wiring but it's the simplest and best solution.
view full answer... - Hitch Cargo Carriers Compatible with Class II Hitch on 2014 Lincoln MKS
- The Flint Hill Goods Hitch-Mount Cargo Carrier # FHG77ZR has usable interior space that measures 50-1/4" long x 30-7/8" wide x 3-3/4-inchs tall. This carrier fits into 2-inch Class III trailer hitches.
Do please note that your 2014 Lincoln MKS can only be fitted with a 1-1/4-inch Class II hitch so this carrier is not usable on this vehicle.
We do have cargo carriers that are designed for the lighter-duty Class II hitches and you can see all of them on the linked page. These include the...
view full answer... - Trunk Mounted Bike Rack Recommendation for 2013 Lincoln MKS
- What is the year/make/model of the Lincoln vehicle you have? I can check to see what your best trunk mounted bike rack solution would be.
view full answer... - Installation Instructions For Tekonsha T-One Vehicle Wiring Harness 118471 For 2010 Lincoln MKS
- We do not have a video of the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118471 on a 2010 Lincoln MKS, but I did attach the written instructions for you to take a look at.
If you are still undecided on a trailer hitch receiver, the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12088 you were looking at is a great option as it will only have the receiver exposed once installed as you can see in the included picture, and it will be great for light...
view full answer... - Will the Covercraft Custom-Fit Vehicle Cover # C17110UG Stay on in Windy Conditions on 2013 MKS
- The Covercraft Ultratect Custom-Fit Cover, # C17110UG, is custom designed for the best possible fit on your 2011 Lincoln MKS to prevent the cover from blowing off in windy conditions. The front and rear of the cover have sewn-in, neoprene elastic to keep the cover secured under the vehicle and the sides have tie-down points so you can easily attach the included tie-down rope.
Keep in mind, extreme wind or weather conditions may remove the cover, however, that will be the case with all...
view full answer...
Go To Results