We do not have a video of the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118471 on a 2010 Lincoln MKS, but I did attach the written instructions for you to take a look at.
If you are still undecided on a trailer hitch receiver, the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12088 you were looking at is a great option as it will only have the receiver exposed once installed as you can see in the included picture, and it will be great for light... view full answer...
The Covercraft Ultratect Custom-Fit Cover, # C17110UG, is custom designed for the best possible fit on your 2011 Lincoln MKS to prevent the cover from blowing off in windy conditions. The front and rear of the cover have sewn-in, neoprene elastic to keep the cover secured under the vehicle and the sides have tie-down points so you can easily attach the included tie-down rope.
Keep in mind, extreme wind or weather conditions may remove the cover, however, that will be the case with all... view full answer...
There should be other places you could attach the wire from the Custom Fit Vehicle Wiring, part # 118482, underneath your 2009 Lincoln MKS besides the parking brake line. A lot of guys will run the wires through the frame rails or zip-tie the wire to areas that are free from suspension components or hot exhaust parts.
If you wanted to find a way to run the wire through your firewall sometimes the holes in the firewall can be difficult to find. A lot of times in the firewall there are holes... view full answer...
Go To Results