Expert Answers about Nissan Frontier
- Firestone Air Bag Helper Springs For a 2016 Nissan Frontier With 2.5" Leveling Kit
- You will need the Firestone Ride-Rite Air Helper Springs # F2558 for your 2016 Nissan Frontier. You will not need any spacers as the Rough Country 2.5" leveling kit only provides lift to the front suspension.
The Air Lift WirelessAIR Compressor System # AL58WQ will allow you to control the air pressure with your smart phone and the Air Lift app. The smart manifold will monitor the air pressure while you drive and make adjustments to the air pressure if it changes by more than 3psi. It...
view full answer... - Recommended Bed Liner Mat For A 2022 Nissan Frontier With A 6' Bed
- WeatherTech currently only carries a tailgate liner for a 2022 Nissan Frontier with a 6' bed so the only other option I currently have is the Access Custom Truck Bed Mat # A45BG. This half inch thick carpet easily snaps in and out of place so that you can protect your bed or pull the mat out to clean it.
WeatherTech does carry a tailgate liner # WT42XQ if you're looking for tailgate protection as well.
view full answer... - Hopkins Vehicle Wiring Harness For a 2019 Nissan Frontier
- On your 2019 Nissan Frontier that came with the factory harness, you will only need to plug in the Hopkins Plug-In Simple Vehicle Wiring Harness # HM43534 once. Then when you need to use the towing connections you will just plug into either the 4-way flat or 7-way blade connectors.
Some Dielectric Grease # 11755 is recommend on the connectors to protect against corrosion and other wiring issues.
view full answer... - Center Cap and Locking Lugs for Trailer Wheel # AM22627
- The pilot diameter of the trailer wheel part # AM22627 is 3.19 inch so you'd need a center cap like part # 319EZ. For locking lug nuts you'd want part # RG01-150 or for standard lugs # LHLR103.
view full answer... - Is There A Tailgate Lowering System For The 2018 Nissan Frontier?
- I have a possible solution for you, but none of the tailgate-lowering systems with shock absorbers will work with your 2018 Nissan Frontier. You may be able to use the Hopkins EasyLift Truck Bed Tailgate Lift Assist # 74211, but this also has not been confirmed to fit your vehicle so I cannot say for sure if this will work. It uses a single torsion bar to make lifting and lowering the tailgate easier. I recommend looking at the demonstration video I attached along with the photos on the...
view full answer... - Adding Weight Distribution and Sway to a Straight Frame Boat Trailer
- For your Magic Tilt Boat Trailer you will need a Blue Ox Pole Tongue Weight Distributing Hitch Adapter # BXW4023. This will bolt around the Pole frame with a width of 2-3/4" to 4-1/2" and height of 3" to 6". It will then allow you to use a weight distribution hitch that utilizes over frame brackets.
I recommend the Blue Ox SwayPro Weight Distribution w/ Sway Control # BXW0556. This system will allow you to back up your boat trailer without removal and will not interfere with the surge...
view full answer... - How Many Valterra Bug Screens for Two Dometic RV Refrigerator Vents
- If you have two vents, you are correct that you would need to order two of the Valterra Bug Screens for Dometic RV Refrigerator Vents # A10-1311VP.
view full answer... - Aluminum Ladder Rack that Fits 2019 Nissan Frontier 6 Foot Bed with Utili Track
- We have the aluminum Erickson Truck Bed Ladder Rack part # EM07705 that is a confirmed fit for your 2019 Nissan Frontier King Cab 6 ft bed with the Utili Track.
I attached a review video for this rack for more info for you to check out as well.
view full answer... - Trailer Wiring for a 2004 Nissan Frontier
- Your vehicle requires a converter to convert the trucks 5-Wire system down to the 4-Wire system used on trailers. You will find a connection point behind the rear bumper on the passenger side frame rail, that you will use to plug in the Plug-N-Tow (TM) Wiring Harness, item # 33515. This wiring harness has a converter installed and plugs inline with the original factory connectors.
If you want to hard wire your trailer connection then you could use the Upgraded Circuit Protected Taillight...
view full answer... - 7-Way Trailer Connector Compatible With Trailer Surge Coupler for 2015 Nissan Frontier
- It sure will!
The # HM43534 is a replacement for the factory provided 7-way. If your truck is a US market vehicle that didn't come with the factory 7-way, you'll need to use # 118266 which includes the necessary relays to activate the tow package. If you have a Canadian market truck, use # 118281
Assuming your trailer has an electric lockout on the surge coupler that prevents the brakes from actuating when the truck is placed in reverse, any of the options mentioned above would work for...
view full answer... - Will Thule Insta Gater Pro Interfere with Rear Derailer of Trek Verve Bike
- The Thule Insta-Gater Pro Truck Bed Bike Rack # TH93VR that you referenced was designed to be able to secure bikes by the front or rear wheel. It will work great with your Trek Verve 2 and would not interfere with the derailleaur.
view full answer... - 2022 Nissan Frontier Fitment with Yakima OverHaul HD Ladder Rack System
- I don't see any reason why the Yakima OverHaul HD wouldn't fit your 2022 Nissan Frontier. This is a pretty universal application so I imagine Yakima is just waiting to officially say that it fits once they can actually get it tested. I say go for it. If you have the standard bed then you need part # Y01151-57 but if you have the tracks in your bed then you need the part # Y01151-5768.
Attached is a review video for you to check out.
view full answer... - Does a Tekonsha Primus IQ Brake Controller Need to be Removed when Not In Use
- As long as it's not in the way for your daily vehicle use you will be just fine to leave your Primus IQ brake controller part # TK90160 installed all the time as that is what nearly everyone does with their controllers.
Now if the controller is getting in the way and you are banging your leg on it or you just don't like it sitting there you could easily unplug it and store it till you need it.
view full answer... - Will 2022 Nissan Frontier BAK Revolver X4s Cover Work with TruXedo Elevate Truck Bed Rack System
- The TruXedo Elevate Truck Bed Rack System # TX46NV is an excellent choice and will fit perfectly with the BAK Revolver X4s # BAK34AV on your 2022 Nissan Frontier with the 6' bed (no Utili-Track System). I really like the Elevate system because it not only is compatible with some tonneau covers but it also has T-Slot channels where the crossbars can adjust back and forth and other accessories can be mounted as well.
view full answer... - Recommended Towing Mirrors For a 2018 Nissan Frontier
- I recommend the CIPA Universal Fit Towing Mirrors # CM11952-2 for your 2018 Nissan Frontier as there is currently not a custom set of slip-on mirrors for your Frontier. These universal mirrors have a simple design that reduces the number of components that can break. They are easy to install and remove once you have them set up for your mirrors.
view full answer... - Troubleshooting Running Lights Not Working With Tekonsha 118266 Installed On 2017 Nissan Frontier
- Since the running lights are still not working after replacing the relay in the Tekonsha T-one Vehicle wiring harness # 118266 you installed in your 2017 Nissan Frontier I recommend using a circuit tester like # PTW2993 and testing the 3 o'clock pin in the 7-way connector with the headlights of your Frontier turned on.
If you have power to that pin but your trailer running lights still don't work then there is an issue with the trailer wiring. You will want check the wiring running from...
view full answer... - Comparing Blue Ox, Curt, and Fastway Weight Distribution for Starcraft Launch Hybrid
- When it comes to weight distribution, tongue weight is the most important factor. It looks like you are ahead of the game and accounted for that with each of these systems, great job. I would still recommend finding your actual tongue weight once your trailer is loaded up. You can use a tongue weight scale like the # e99044 or the bathroom scale method to find this.
Starting with the Curt # C17051, I would definitely not recommend this over the Blue Ox or Fastway. As you pointed out, this...
view full answer... - Is there a Height Adjustable Trailer Coupler for a 2 Inch Ball
- We have numerous adjustable ball mounts, see link, but as far as adjustable couplers you would want to look at channel mount designs such as # PSA200S0303 which you could use with channel # C45910. I have linked videos on both of these parts for you.
view full answer... - Weight Distribution System Recommendation for Trailer with 600 lbs Tongue Weight
- Ideally you want your loaded tongue weight figure (including any cargo behind the rear axle) to land right in the middle of tongue weight range of the weight distribution system. For 600 lbs of tongue weight I have a great solution.
The Strait-Line Weight Distribution System # RP66083 has a tongue weight range of 400-800 lbs and features the only sway control on the market designed to fight sway before it starts. This is going to be your absolute best solution.
But to your question...it...
view full answer... - Parts Needed to Flat Tow 2012 Nissan Frontier
- While we do have the parts needed to hook up your 2012 Nissan Frontier to be flat towed, the drive shaft disconnects are not something we offer, and are beyond our purview. I know that some products allow 4WD vehicles to use a single drive shaft disconnect that is for use with either a 2WD or 4WD, but we just don't have that familiarity with those products so the best bet there is to ask whomever you are getting the disconnect from, as they should be able to easily tell you that in regards...
view full answer...
Go To Results