Expert Answers about Nissan Frontier

• Complete Brake Controller And 7 Way Setup For 2017 Nissan Frontier
• Yes we do carry the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR. Use Plug-and-Play Wiring Harness # RED39FR to install the brake controller on your 2017 Nissan Frontier. This is a simple plug-in installation process, just find the factory-wired connection under the dash and plug the harness into it. The other end of the harness plugs into the controller. If you already have the 7 way trailer connector at the back of your vehicle, then you are all set. If you do not, then use...
  view full answer...


• Availability of a Vehicle Wiring Harness for a 2013 Nissan Frontier
• I have a solution for you, but the Hopkins Plug-N-Tow Wiring Harness, # 33525, will not fit the 2013 Nissan Frontier. The Curt Wiring Harness with 4-Pole Flat Trailer Connector, # C56225, is confirmed to fit your 2013 Nissan Frontier truck. The wiring harness will include the needed relays that will activate the lighting functions on your Nissan Frontier. I have attached a couple videos on this T-One harness for you to review. One is a general review of the harness and the other video...
  view full answer...


• Are Additional Mounting Brackets Needed for the TruXedo TruXport on a Frontier with Utilitrac System
• There are not any mounting brackets for the TruXedo TruXport # TX292301 to attach to the utilitrac system in your 2019 Nissan Frontier. The reason there are not any brackets is because the TruXedo TruXport # TX292301 is a top mount cover, so it will actually install above the utilitrac system. Therefore, you would not need mounting brackets for the utilitrac system.
  view full answer...


• Installing 7-Way Trailer Connector on 2014 Nissan Frontier
• To install a 7-way, you'd first need to install the 4-pole flat connector (if you don't already have one.) I'd recommend the Curt wiring harness, part # C56225. Once that's in place, how you would proceed will depend on the trailer you're pulling. If the trailer does NOT have brakes, but just the lighting circuits, you can simply use the # 37185 adapter. The adapter would plug into your existing 4-pole, and the white wire with the ring terminal on it would ground to the vehicle frame....
  view full answer...


• Trailer Wiring Harness for 2007 Nissan Frontier XE Without Factory Tow Package
• For your 2007 Nissan Pathfinder without factory tow package you will need a kit that includes the relays to activate the trailer wiring. You can use Curt # C56225 that includes the relays and which provides the 4-pole flat connector. This 4-pole will provide stop/turn/running light signals for your trailer. If you wish to add a 7-way socket for flexibility you can add Hopkins part # 37185. This is a combination 4-pole and 7-way RV-style socket that simply plugs in to the 4-pole from the...
  view full answer...


• Trailer Wiring Harness for 2014 Nissan Frontier
• We offer two different trailer wiring harnesses for your 2014 Nissan Frontier, a custom-fit plug-in kit # C56225 and a universal hard-wire type kit # 119147KIT, both from TowReady. I have linked an installation video for each. Either of these will provide a 4-pole flat trailer connector to provide lighting functions to your trailer. You might consider adding a mounting bracket # 18144 to hold the connector at your rear bumper.
  view full answer...


• Thule Wingbar Roof Rack that Fits 2019 Nissan Frontier Crew Cab
• Thule does recommend the 53 inch crossbar Wingbar Evo roof rack for your 2019 Frontier Crew Cab with the part numbers # TH711400, # TH710501, # TH145160 but since you have a 60 inch bar already I would try just ordering the feet and fit kit first to see if there is enough lower slot length on the bars to allow the longer bars. You could always order the 53 inch bars later. We do have to recommend you stick with exact mounting location for the feet of the rack though.
  view full answer...


• Availability of a 4 Bike Truck Bed Mount Bike Rack that Will Fit a 2010 Nissan Frontier
• We have numerous truck bed mount bike racks, and I am sure that one of them will be the right fit for your 2010 Nissan Frontier. First, if your truck DOES NOT have the tie down track system in the bed, you will be able to use the Truck Bed 4 Bike Carrier - Topline, # UG2500-4. If your truck does have the tie down system, then you may be interested in The Claw Fork Mount Bike Carrier, # S64700. You would need 4 of them for 4 bikes and it will require removing the front bike wheels, but...
  view full answer...


• Roof Rack and Kayak Carrier Recommendation for a 2016 Nissan Frontier Crew Cab
• Yes, the Rhino Rack part numbers # RRVA137B-2, # RRRLKVA, and # DK108 will fit your 2016 Nissan Frontier 4-door. The Crew Cab models are the 4 door models. The Rhino Rack Kayak Carrier part # S510 would then be a great option for carrying your kayak as well. It has a 99 lb capacity. Be sure to check the owners manual of your truck for the roof capacity.
  view full answer...


• Color Options on the CE Smith Trailer Fenders for 14 Inch Wheels
• I might have a solution for you. However, the CE Smith Fender # CE19504 is not available in the color grey. Fulton has the Single Axle Trailer Fenders, # F008594-2, that are silver in color. This fender is the closest color match to grey that we carry in trailer fenders for 14 inch wheels. This pair of fenders are similar in length of the CE Smith fenders as well as how they will mount to you trailer.
  view full answer...


• Availability of Catalytic Converter and Exhaust For 2004 Nissan Frontier 4WD V6 Crew Cab 6 Foot Bed
• If you have the V6 3.3L Supercharged engine you will have two catalytic converters. There is one on the drivers side towards the front and one on the passenger side towards the front. The drivers side would be MagnaFlow Catalytic Converter, part # MF49478, and the passengers side would be MagnaFlow Catalytic Converter, part # MF49477. If you have the V6 3.3L normally aspirated engine you will have a total of 4 catalytic converters. The two in front on the drivers and passenger side and...
  view full answer...


• Availability of Bull Bar With Light Bar for 2017 Nissan Frontier
• Although we don't have a chart, I do have a bull bar/light bar combination for your 2017 Nissan Frontier. The Aries 20" Light Bar # AA1501262 is compatible with both the Aries Bull Bar Semi-Gloss Black Powder Coated Steel # AAB35-9002 and the Aries Bull Bar Polished Stainless Steel # AA35-9002. Both of these Bull Bars come with skid plates as well.
  view full answer...


• Availability of Access Tonneau Covers for 2011 Nissan Frontier
• There are a few different styles of Access tonneau covers that will fit your 2011 Nissan Frontier. The Access tonneau covers are listed for a Nissan Frontier Crew Cab with a 5 foot bed and a Nissan Frontier King Cab with a 6 foot bed. I am including a link to a product page that will show the Access tonneau covers that will fit your 2011 Nissan Frontier if it is a Crew Cab with a 5 foot bed. Also, a link to a product page that will list the Access tonneau covers that will fit a 2011 Nissan...
  view full answer...


• 7-Way Trailer Socket Mounting Bracket for 2011 Nissan Frontier
• We do offer 7-way mounting brackets for vehicles that are equipped with a 7-way type trailer socket like the one included with part # 118266 and these are shown on the linked page. Many of these have multiple holes to allow them to accept 7-ways from different makers. Your best bet is to add a no-drill bracket to your hitch, part # 18140, and then add a 7-way bracket # PK12711U to it. You will possibly need to drill a few new holes on one or both parts to join them. Some aftermarket hitches...
  view full answer...


• Coiled Flex Umbilical Cable to Join 7-way on RV to 6-Way on Flat Towed Vehicle
• Hopkins offers a flex cable, part # HM47053 that sounds exactly like what you need. On one end, it has the 7-way plug that's compatible with your RV, and a 6-way plug on the other that would plug into your towed vehicle. I'll link you to some of our help articles that contain additional information about flat towing.
  view full answer...


• Availability of 4-Way Flat to 4-Way Round Adapter
• I do have a solution for you, however we do not currently have an adapter available that has a 4-way flat on one end and a 4-way round male connector at the other end. I recommend using the Pollack Heavy-Duty 4-Pole Round Pin Socket # PK11410 along with the Hopkins Endurance 4-Way Flat Trailer Connector # HM48110 for your application. You can simply wire the Hopkins 4-Way flat to the Pollack 4-Way round connection to get exactly what you are needing.
  view full answer...


• Towing Mirrors for 2019 Nissan Frontier
• We will not have that type of replacement mirror for your 2019 Nissan. I recommend the K-Source Universal Towing Mirrors, # KS69ZR. This has a ratcheting rubber straps that helps keep the mirrors attached tightly to your 2019 Nissan Frontier. I really like that the arms are hinged so that they can be easily adjusted to provide you with a wide field of vision.
  view full answer...


• Does Dexter Axle Have An Axle With A 71" Hub-Face-To-Hub-Face Measurement
• I recommend double checking your hub-face-to-hub-face measurement to ensure it really is 71" because we do carry the Dexter Trailer Axle w/ Idler Hubs # 20545I-EZ-72-15, which has a 72" hub-face-to-hub-face measurement and 58" spring-center-to-spring-center length. It also comes with idler hubs with a 5 on 4-1/2 bolt pattern all ready for 13" to 15" wheels. If it really is 71" then you would need to use a universal fit option like the Timbren Axle-Less Trailer Suspension System with Hubs...
  view full answer...


• Are the Towing Relays for 2014 Nissan Frontier Available
• Since just the harness and three relays aren't available your best option is to go with the part # C56225 which includes the parts you need plus an extra 4-way harness. It might be worth having the extra 4 way on hand in case your existing one is ever damaged.
  view full answer...


• Brake Controller Wiring Adapter for 2015 Nissan Frontier
• What you're looking for is called a Brake Controller Wiring Adapter, and we do indeed have one for your 2015 Frontier. You'll need part # 3050-P, which has a flat plug on one end that would plug into the back of your Prodigy brake controller, and the other end would plug into the connector under the dash of your truck. Nissan typically places the connector for the brake controller under the dash to the left of the steering column. Near the top of the emergency brake pedal, look for a...
  view full answer...