Aluminum Ladder Rack that Fits 2019 Nissan Frontier 6 Foot Bed with Utili Track

Question

Question:

I am looking for an aluminum over the cab truck ladder rack for a 2019 Nissan Frontier King cab 6 ft. bed with the utilli track system, I want to know if any will work with the utilli track tool box from Nissan. Thanks

asked by: Don R

1

Helpful Expert Reply:

We have the aluminum Erickson Truck Bed Ladder Rack part # EM07705 that is a confirmed fit for your 2019 Nissan Frontier King Cab 6 ft bed with the Utili Track.

I attached a review video for this rack for more info for you to check out as well.

expert reply by: Jameson C

1

Answer 1

The torque specs for the Hydraulic Brake Kit #AKFBBRK-35-D are 45-70 foot lbs and for your Titan Actuator T43329007K the bolts should be tightened to 80 foot lbs.

view full answer...

Answer 2

Good questions. The difference between free backing brakes like the #AKFBBRK-35-D and regular hydraulic drum brakes like #DMSB18794M-93M (referred to as duo or duel servo) is that the wheel brake cylinder has pistons on both sides of the regular/duo…

view full answer...

Answer 3

You are correct. We sell the assemblies as a pair as part #AKFBBRK-35-D or individually as part #AKFBBRK-35R-D and #AKFBBRK-35L-D.

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Aluminum Ladder Rack that Fits 2019 Nissan Frontier 6 Foot Bed with Utili Track

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching