Although we don't offer a custom slip-on mirror like the # CM11401 for your Frontier, we do offer universal-fit towing mirrors that would work well for you.
I'd recommend the K-Source # KS3891-2, which includes the driver and passenger side mirrors. The mirrors attach to the factory mirror housing using ratcheting rubber straps. The ratchets allow a tight fit for minimal vibration, and the large 7-3/4 by 5-1/8 mirror will help you stay aware of what's going on along side and behind you... view full answer...
The Curt 7-way kit part # C56226 that fits your 2012 Nissan Frontier that includes relays and harnesses is for the version of the vehicle that don't have the factory tow package and the Hopkins # HM43534 is for the versions of the vehicle that do have it.
The Hopkins also has a 4-way on the side of the 7-way so it covers both standard wiring configurations.
Basically the tow package means the vehicle already has the relays and harness. view full answer...
The best compatible option if you are looking to have your Rhino-Rack Ski and Snowboard Carrier Part # RR576 use the same key as your Rhino-Rack Roof Rack on your 2017 Nissan Frontier, will be also purchasing the Rhino-Rack Masterkey Lock Barrels, Part # RRRK059-8. This kit allows you to change the locks in your carrier, and roof rack, and uses the key in the kit to have all of the locks keyed the same.
Rhino-Rack does not offer just a single replacement key to work with multiple systems.... view full answer...
If you've tried a Curt and Tekonsha kit for your 2009 Nissan Frontier and the circuits were reversed then what we offer would have the same issue as that's the same two kits we offer for your vehicle. I know it's not ideal but best solution is probably going to be to go with a kit like the # 118266 and then reverse the pins or cut the wires and switch them if you prefer that.
I wish there was an easier solution. view full answer...
On some Nissan vehicles the connectors where the 7-Way plugs in are wired differently than on other Nissan vehicles. To fix the issue you can swap the blue and black wires on the harness that plugs into the vehicle.
We've seen this issue a few times with 2012 Nissan Frontiers like yours with 7-way harnesses like the part # 118266. view full answer...
The Reese Light-Duty Weight Distribution System # 66557 would be a good choice for you based on the overall weight and tongue weight of your trailer and the tongue weight.
The most important figure to have when picking out a weight distribution system is the loaded tongue weight which you gave me. Based on that the # 66557 would be a great choice as its capacity is slightly higher than the tongue weight of your trailer.
I attached an FAQ on weight distribution and a link to installation... view full answer...
If you check out the picture I attached you'll see where to find the location where you'll need to install a blue relay from the Curt Relay Kit # C57000. Sounds like you may be missing it as this is very common with Nissan Frontiers like yours. view full answer...
Your 2008 Trailmanor 2720 has a 3,500 lb axle, so I recommend the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA. This kit will work very well and will automatically adjust after the initial startup to make sure that you have the best braking available at any given time. view full answer...
The factory 7-Way on your 2013 Nissan Frontier should be able to come apart like in the picture I have included. If it can then you can replace the 7-Way part with # HM40975.
Or you could just use an adapter, # PK12716, for times when you need a 4-Way flat. view full answer...
First you will need a trailer hitch installed on your 2011 Nissan Frontier like the Draw Tite part # 75282 which is a confirmed fit. I attached an install video for this for you to check out as well.
For your trailer that weighs 4,800 lbs the Pro Series WD system part # PS49582 would most likely be properly rated, but you would need to verify the tongue weight of your setup first. If it falls between 550 and 750 lbs this system would work well.
The best way to pick out a weight distribution... view full answer...
In order to use a snowplow on the 2022 Nissan Frontier you'll need a front mount trailer hitch, the Draw-Tite Front Mount Trailer Hitch Receiver part # 65075 is currently our only option for this. The hitch does require removal of the lower air dam but this can be reinstalled once trimmed if desired. If you would like to see what other steps are involved you can check out the install instructions below. The hitch will then allow you to attach a snowplow like the Detail K2 Snowplow for 2"... view full answer...
For your 2024 Nissan Frontier I recommend the etrailer Trailer Hitch Receiver # e98869. This is a Class III hitch with a 2" receiver and a max gross trailer/tongue weight of 5,000/500 lbs. This hitch also features a matte black powder coat finish. The finish gives it an OEM look while hiding dirt and dings. It has a bolt-on installation and comes with a lifetime warranty.
For a 4-way you can use the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. This uses... view full answer...
The Access Vanish Soft, Roll-Up Tonneau Cover # 834532007950 that you referenced includes a clamp kit specifically designed to work with the Utili-Track system that you have on your 2013 Nissan Frontier so I can guarantee it will work for you. view full answer...
Depends on what brake controller you have, but if you look at the back of your brake controller and you see what looks like an L-shaped connector where the wires all plug into which then plugs into the back of the connector you can simply replace that with the # 3050-P. Otherwise you'd have to use the # 3050-S to hardwire the controller to a connector compatible with your 2012 Nissan Frontier. view full answer...
We have a few trailer hitches that will work for your 2003 Nissan Frontier Desert Runner. From my research I found that the Desert runner is a King Cab with a short bed. If your truck is a different model just let me know and I will make recommendations that will work for you.
For a King Cab I recommend the Curt Trailer Hitch, part # 13831. This is a Class lll hitch and has a 2 inch receiver opening. I have attached a link to an installation video you can check out.
If you have the Crew... view full answer...
Since your 2015 Nissan Frontier has the tow package all you need to install the Hopkins Agility Brake Controller part # HM47294 and the correct harness part # HM47635.
No other parts or wire splicing would be needed. view full answer...
Although the # C59496 universal harness you'd looked at would work just fine for you, we have a plug and play option that would be much easier to install.
The Curt # C56225 would install without any cutting or splicing needed. The # C56225 provides both the 4 pole harness that plugs into the connector behind the rear bumper as well as the jumper harness and relays necessary to activate the tow package. The jumper harness plugs in to the existing connector located behind the passenger... view full answer...
I recommend our etrailer Trailer Hitch Receiver # e98869 as the best option for your 2024 Nissan Frontier. The receiver has a matte black finish which gives it a clean factory appearance while the other receivers offered are gloss black which stands out against the rear matte fascia.
The Curt Powered Tail Light Converter # C59236 will allow you to wire in a 4-way flat connector. This is the most commonly used connector on small utility and boat trailers. If you are going to be pulling... view full answer...
A set of SumoSprings like part # SSR-610-54 for your 2013 Nissan Frontier are going to be your best option for adding more support to the truck's rear suspension when carrying the camper you mentioned. This will help reduce suspension sag and will also help with side to side sway without adding too much harshness to the ride quality. view full answer...