The key for selecting a replacement grease seal is the reference number, in this case # 10-9. The manufacturer code does not matter. This is a single-lip seal with an inner diameter of 1.500-inches and an outer diameter of 1.987-inches. It is compatible as a replacement for the following other manufacturers' parts:
Dexter 010-009-00
Transcom 15191VB
National 474276
NOK AR2266FO
Chicago Rawhide 14840
If you prefer a double-lip seal in this same size use # RG06-020 which is sold as a pair. view full answer...
For the TracRac G2 Ladder Rack on your Nissan Frontier we have the Replacement Upright # TA7521902002. The upright itself measures 22-3/4 inches tall so I do recommend verifying that this matches your existing upright in case you have a slightly older model. If you also need the Tie-Down Cleat you can use part # TA01-27046. view full answer...
The correct replacement strip for your Access Vanish Soft, Roll-Up Tonneau Cover # 834532007950 on your 2017 Nissan Frontier can be found as part # A60270. This measures 1" wide and 17' long so it should be more than enough for your 6' bed. view full answer...
If you can reply to this email with the pictures I can help you out. Just be sure to let me know what the product is they are installed on! view full answer...
We have the replacement modular base for your TracRac Pro2, part # TH37001XT.
The part you need for the passenger right front or driver rear is part # 8528383001.
For the driver side front and passenger rear is part # 8528382001. view full answer...
The TruXedo TruXport Soft Roll-Up Tonneau Cover that fits your 2013 Nissan Frontier short bed is part # TX292301. For a replacement vinyl tarp only you can use part # TX2923-CVR. For replacement Velcro you can use Truxedo Shur-Bond Velcro Brand Fastener, part # TX1117876.
Since your cover is a few years old, it will likely have a slightly different fit than a new cover will and so I suggest you install a new vinyl tarp as this may well help with your leakage issue more than just new Velcro. view full answer...
It sounds like you're talking about the Velcro strips that keep the cover secure on the sides on your 2010 Nissan Frontier. You can use the Replacement TruXedo TruXport Shur-Bond Hook-And-Loop Fastener Strips for 6-1/2' Beds # TX1117876 and cut it down to size. If you needed the loop side for the tarp then you can use two of the # TX1705183.
If you meant the corner weather seals we have the Replacement Corner Weather Seal for TruXedo TruXport Covers # TX1703568. We also have the rear... view full answer...
For your wheel bearing, races, and seals, I don't have the dimensions available. For a precise fit, I'll need you to give me the inner diameter and the outer diameter measurements of your bearing.
Most 4 lug hubs use the same bearings so it is a good possibility that the TruRyde Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal # DL21792 may fit. I've attached a video of this kit for you. view full answer...
We do have Curt hitches that fit your 2004 Nissan Frontier but the 13900 is not one of them. Instead you'd want the # 13841 for if you have a short bed or the # 13842 for if you have a long bed. I confirmed with Curt these fit your truck and do not require any drilling. view full answer...
Yes! For just the replacement hardware for your Draw-Tite Trailer Hitch # 75186 (which is indeed the correct model for your 2003 Nissan Frontier) you just need the part # RHK.
Once on this product page you will simply type in the hitch model number (75186) in the text box below "Hitch Item Number" and select Draw-Tite from the manufacturer drop-down menu. We will then send you out the exact replacement hardware kit with everything needed to install the hitch to your Frontier. view full answer...
I'm fairly certain Nissan would offer a replacement, but I'm not aware of the OEM part number. We do offer an aftermarket replacement that would work great for you.
The Tow Ready # 118267 is the correct replacement 7-way trailer connector for your 2016 Nissan Frontier. If the 7-way connector was broken, I'm guessing you'll need another mounting bracket as well. We offer a replacement bracket as part # PK12711U.
If you click the provided link, you'll see a video where my buddy Randy will... view full answer...
Yes, you can get the replacement arms for the Roadmaster Crossbar-Style Base Plate Kit # 327-3.
What you need are the Roadmaster Replacement Arms for Base Plate Kits # RM-ARMS.
To order you will need to go to the product page and click in the installation details in order to get the correct arms. view full answer...
Replacement cover # TX5836-CVR fits TruXedo Lo Pro Qt Tonneau cover TX583601 which will fit a 2002 Nissan Frontier Crew Cab with a 6 foot bed.
So provided that your cover is a TruXedo Lo Pro QT this is the correct replacement! view full answer...
I have a solution for you, but we do not have the individual hardware kits for each hitch built out within the site- there are just too many to list. In order to get the correct Replacement Hardware Kit # RHK , you'll simply go to the linked page for the RHK and select the manufacturer of the hitch, in this case it is a Curt. After that, you'll put in the part number of the Curt Hitch # 13241 where it says "Hitch Item Number". After you've done that, you'll just add the item to your cart... view full answer...
I do not know of a way to check a relay and see if it is good other than to use a new relay in the wiring.
For your 2008 Frontier, a wiring harness like part # C56225 uses three relays, so it could be any one of the three has possibly gone bad.
We do offer the Curt Relay kit # C57000. This kit includes the two smaller Blue relays and the larger Brown relay. view full answer...
No problem. We can help you with a new vehicle-side or trailer-side connector for your 7-way trailer wiring setup. To help I linked an article and photo that show you the usual function-to-pin configuration for 7-ways. Note you always want to wire by function, NOT by wire color since colors can vary. You can use a tester like # PTW2992 to determine what function each vehicle wire carries. The linked video demonstrates use of the tester.
For a replacement 7-way vehicle-side socket you can... view full answer...
The most I was able to find about the Coleman 4735CC201 leaf spring is that it's rated for 1,000 lbs which means it goes to a 2,000 lb axle. For that application we have the 4-Leaf Slipper Spring w/ Radius End # e69SR which measures 25-4/8" long from the center of the eye to the end of the spring itself. If you use a jack to raise your trailer by the frame you will be able to get under the trailer to measure the leaf spring without it being compressed and compare that to our length.
Something... view full answer...
The replacement Extang Tonneau Cover for your 2005 Nissan Frontier King Cab with the 6 ft bed is part # EX13995.
This cover fits 2005 through 2015 Nissan Frontier and replaces the cover for the Extang Tuff Tonno Soft Tonneau Cover, part # EX14995. view full answer...
I do have an option for you but spring bars are not interchangeable across brands. The only option we can offer is a new system. I recommend the Curt TruTrack Weight Distribution System part # C17500 which is a complete system with pre-torqued hitch ball ready to go. It has a 10,000 lb capacity. There's a 15,000 lb capacity as well, part # C17501. view full answer...
The Replacement Tarp for TruXedo Lo Pro Soft Tonneau Cover # TX577601-CVR is not a fit for you 2011 Nissan Frontier. If you have the Lo Pro on your truck then the Replacement Cover for TruXedo Lo Pro Soft, Roll-up Tonneau Cover - Black # TX5923-CVR is the correct fit for your 5 foot bed. It will come with the pieces that latch into place. view full answer...